TONTON Security Cameras Wireless Outdoor User Manual
- June 14, 2024
- Tonton
Table of Contents
- Connect network cable to camera and the Router, Plug in the power adapter
- The IP Camera and phone are in the same LAN, Connect your phone to a WI-
- Open the phone monitoring software, select “Press add camera
- Click the camera icon to open real-time monitoring screen
- WIFI Setting
- Alarm Management and notification Settings
- SD Card plan Recording
- You can also use the computer monitor
- TECHNICAL SUPPORT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TONTON Security Cameras Wireless Outdoor User Manual
Connect network cable to camera and the Router, Plug in the power adapter
The IP Camera and phone are in the same LAN, Connect your phone to a WI-
FI network, Monitoring software download
Open the Google Play& App Store, Search for “CamHipro”
Open the phone monitoring software, select “Press add camera
- Click to add camera, enter into add camera interface.
- Search: click LAN Search button, search the network camera in the mobile phone wireless network; Select the UID.
- Enter the camera password (default password is admin).
- Click Finish on the upper right corner.
Click the camera icon to open real-time monitoring screen
WIFI Setting
-
Find Wi-Fi Setting bottom of page in the advance setting page:
-
Click Wi-Fi manager button then set wifi ssid:
-
Choose router’s ssid type wifi password , camera will successfully connect wifi.
Alarm Management and notification Settings
You need the cameras setting, click the alarm management and notification
setting button in the rear of the camera.
- Alarm Push :Open you phone can receive alarm information tips:
- Motion detection: Click ON Open Motion alarm.
- SD Card record while alarm: Choose ON Means the alarm video will save to SD Card.
- Email alarm and send pictures: Choose ON Means it will send pictures to specified mailbox when alarm.
SD Card plan Recording
You need to first TF memory card into the camera card slot, entering the
setting interface:currently 24 hours of continuous recording, the default is
600 seconds to create a video file.
You can also use the computer monitor
Step 1: enter the official software download address http://www.tontonsecurity.com/download/page_show_104.htm
Step 2: Click on the icon monitoring software installation is complete,
run the monitoring software .
Click on the icon to enter the settings interface, Add the camera as
follows:
The third step: enter the setup interface Follow these steps to complete the installation:
- Click “search:
- Check the left to search for the camera and the right area:
- Click “Add”
Step 3: Complete the installation
Step 4: Watch the monitor screen
Click the icon Enter the monitoring interface;
Click the icon recording playback screen:
Each button control interface description:
- PTZ camera rotation (requires camera support rotation);
- Speaking, speaking, speaking to the camera side;
- Listening, listening to the sound side of the camera;
- Video, click-open the video function;
- Pictures, click-to capture the current screen;
- Centralized monitoring, switch the monitor screen multi-screen monitor at the same time;
- Local playback, video playback history stored on the local computer;
- Remote playback, playback camera TF card to store historical record;
- Off the current user;
- Exit the software;
TECHNICAL SUPPORT
Address: Room 101, Building 25, Jindi Dynamic Port
Business Park, No.29 Xianggong Road, Zhuhai, China
WhatsApp:
(US) +86-183-8165-7955
(EU) +86-132-8603-2360
(UK) +86-134-2033-1554
Email: service@tontonsecurity.com
Service website: //www.tontonsecurity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>