BOSE PROFESSIONAL DM10S-SUB 10 inch Surface Mounted Subwoofer Owner’s Manual

June 16, 2024
BOSE PROFESSIONAL

BOSE-LOGO

BOSE PROFESSIONAL DM10S-SUB 10 inch Surface Mounted Subwoofer

BOSE-PROFESSIONAL-DM10S-SUB-10-inch-Surface-Mounted-Subwoofer-
PRODUCT

Technical Specifications

  • Power Handling, long-term continuous: 300 W
  • Power Handling, peak: 250 W
  • Sensitivity (SPL/ 1W @ 1 m): 90 dB
  • Calculated Maximum SPL @ 1 m: 115 dB
  • Calculated Maximum SPL @ 1 m, peak: 114 dB
  • Recommended Crossover: 80 – 200 Hz (requires active crossoverin DSP)
  • Recommended High-Pass Protection: 40 Hz with recommended 18 dB/ octave filter
  • Transformer taps:
    • 70V: 20, 40, 80, 150 W, bypass
    • 100V: 40, 80, 150 W, bypass
  • Transducers:
    • Low Frequency: 1 x 10-inch woofer (254 mm)
    • Nominal Impedance: 8 ohms (transformer bypass)

Product Overview
The DesignMax DM10S-SUB surface-mounted subwoofer is a versatile loudspeaker that can be combined with other DesignMax models to complete any design. It features a range of loudspeakers to mix and match, from low-profile models to high-SPL compression-driver loudspeakers. The subwoofer delivers rich bass performance with custom drivers and can be optimized using select Bose Professional DSPs and amplifiers.

Key Features

  • Combine DesignMax models to complete any design
  • Deliver rich bass performance with custom drivers
  • Use Bose Professional DSPs and amplifiers for optimalperformance
  • Blend with any room design with elegant form factors andminimum-bezel grilles
  • Reduce installation time with the patented QuickHold mountingsystem
  • Install easily with industry-standard accessories

Product Usage Instructions

Installation
To install the DesignMax DM10S-SUB surface-mounted subwoofer, follow these steps:

  1. Choose a suitable location for the subwoofer.
  2. Attach the QuickHold mounting system to the desired surfaceusing appropriate screws or mounting hardware.
  3. Connect the subwoofer to an amplifier or a Bose ProfessionalDSP using the Euroblock connectors.
  4. If installing in-ceiling models, ensure the plenum-ratedbackcans, tile bridges, and front-access audio wiring are properlyconnected.
  5. Securely mount the subwoofer onto the QuickHold mountingsystem.

Optimizing Performance
To optimize the performance of the DesignMax DM10S-SUB subwoofer, follow these guidelines:

  • Use select Bose Professional DSPs and amplifiers to enable BoseProfessional loudspeaker EQ and SmartBass processing.
  • Set the recommended crossover frequency between 80 – 200 Hzusing the active crossover in the DSP.
  • Apply a high-pass filter with a cutoff frequency of 40 Hz and aslope of 18 dB/octave to protect the subwoofer.
  • Refer to the product manual for detailed instructions onconfiguring the DSP and amplifier settings.

Frequently Asked Questions (FAQ)

Q: What is the power handling of the DesignMax DM10S-SUB subwoofer?
A: The subwoofer has a long-term continuous power handling of 300 W and a peak power handling of 250 W.

Q: What are the available transformer taps for the subwoofer?
A: The subwoofer has transformer taps for both 70V and 100V systems. The available taps for 70V are 20, 40, 80, and 150 W, with a bypass option. For 100V systems, the available taps are 40, 80, and 150 W, also with a bypass option.

Q: Can the subwoofer be used in outdoor environments?
A: The subwoofer is not specifically designed for outdoor use.
However, it can be used in outdoor applications as long as it is protected from direct exposure to water or extreme weather conditions.

DesignMax DM10S-SUB
surface-mounted subwoofer

Product Overview

Delivering rich low-end performance,300-watt DM10S-SUB subwoofer brings instantly impressive bass to any commercial sound installation. The surface- mounted DM10S-SUB has a 10-inch woofer, 35 Hz – 125 Hz frequency range, and locks onto a hidden QuickHold U-bracket. DesginMax subwoofers complement and enhance any DesignMax installation.

Key Features

Combine DesignMax models to complete any design, big or small — 12 loudspeakers to mix and match, from 2-inch, low-profile models to 8-inch, high-SPL compression-driver loudspeakers and outdoor-rated options.
Deliver rich bass performance with custom drivers; for optimal performance use select Bose Professional DSPs and amplifiers to enable Bose Professional loudspeaker EQ and SmartBass processing, which expands performance and response at any listening level.
Blend with any room design with elegant form factors, minimum-bezel grilles available in black or white, and removable logos.
Reduce installation time with the patented QuickHold mounting system, which also reduces strain, hassle, and the chance of product damage.
Install easily with industry-standard accessories — all models include Euroblock connectors; in-ceiling models include plenum-rated backcans, tile bridges, and front-access audio wiring that makes installation and troubleshooting easier.

Technical Specifications

SINGLE LOUDSPEAKER PERFORMANCE

Frequency Response (–3 dB) (1)| 41 – 108 Hz
Frequency Range (–10 dB) (1)| 35 – 125 Hz
Nominal Coverage (1 – 10 kHz)| Omnidirectional below 200 Hz
Nominal Coverage Angle (1 – 10 kHz)| Omnidirectional below 200 Hz
 | AES component test (4)| Bose Professional extended-lifecycle test (5)
Power Handling, long-term continuous| 300 W| 250 W
Power Handling, peak| 1200 W| 1000 W
Sensitivity (SPL/ 1W @ 1 m) (2)| 90 dB| 90 dB
Calculated Maximum SPL @ 1 m (3)| 115 dB| 114 dB
Calculated Maximum SPL @ 1 m, peak| 121 dB| 120 dB
Recommended Crossover| 80 – 200 Hz (requires active crossover in DSP)
Recommended High-Pass Protection| 40 Hz with recommended 18 dB / octave filter
Overload protection| Resistor-network power reduction with automatic reset


Transformer taps

| 70V: 20, 40, 80, 150 W, bypass

100V: 40, 80, 150 W, bypass

TRANSDUCERS
Low Frequency| 1 x 10-inch woofer (254 mm)
Nominal Impedance| 8 ohms (transformer bypass)
PHYSICAL

Enclosure Material| High-density wood composite with solid color laminate, UV fade resistant
Grille| Perforated steel, powder-coated finish, paintable, tamper-resistant design
Logo| Rotatable, removable
Color| Black: RAL 9005, White: RAL 9003, Paintable
Environmental / Ingress-Protection| Indoor only
Safety Agency| UL-1480A, S5591/ UL Listed, NFPA70, CE compliant
Operating Temperature Range| 0 °C to 50 °C (32 °F to 122 °F)
Connectors| Euroblock 6-pin connector with loop-through, mounted on rear. Accepts 18 AWG (0.8 mm2) to 14 AWG (2.5 mm2) size wire


Suspension / Mounting

| QuickHold Mounting System with included U-Bracket
2 repeatable mounting angles: 0°, 90° for wall or ceiling placement
One (1) rear M8 screw insert for safety-tether attachment
Dimensions (H × W × D)| 502 × 316 × 323 mm (19.8 × 12.5 × 12.7 in)
Dimensions (H × W × D) with bracket| 502 × 316 × 346 mm (19.8 × 12.5 × 13.6 in)
Net Weight, Loudspeaker with grille and bracket| 16.1 kg (35.5 lb)
Shipping Weight| 18.8 kg (41.5 lb)
Included Accessories| U-Bracket
Optional Accessories| None
PRODUCT CODES
831856-0110| DESIGNMAX DM10S-SUB SINGLE BLK
831856-0210| DESIGNMAX DM10S-SUB SINGLE WHT

Footnotes

  1. Frequency response and range measured on-axis in half-space environment with Bose Professional EQ voicing
  2. Sensitivity measured on-axis in half-space environment with Bose Professional EQ voicing
  3. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression
  4. AES standard 2-hour duration with IEC system noise
  5. Bose Professional extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration
  6. Frequency response shown using 40 Hz HPF 18 dB/octave and 100 Hz LPF 18 dB/octave

On-Axis Frequency Response 6

BOSE-PROFESSIONAL-DM10S-SUB-10-inch-Surface-Mounted-
Subwoofer-1

Impedance

BOSE-PROFESSIONAL-DM10S-SUB-10-inch-Surface-Mounted-
Subwoofer-2

Dimensions

BOSE-PROFESSIONAL-DM10S-SUB-10-inch-Surface-Mounted-
Subwoofer-3

NOTES:

  1. DIMENSIONS ARE IN MILLIMETERS OVER INCHES
  2. WEIGHT APPROX 16.05kg [35.40lbs] (SPEAKER ONLY) WEIGHT W/BRACKET APPROX 16.07kg [35.45lbs]

Bose is a trademark of Bose Corporation.
DesignMax, QuickHold, and SmartBass are trademarks of Transom Post OpCo LLC.
All other trademarks are the property of their respective owners.
For additional specifications and application information, please visit BOSEPROFESSIONAL.COM.
Specifications subject to change without notice. 05/2023

BOSEPROFESSIONAL.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals