KitchenAid KCGG530PBK 30 Inch Cooktop Gas On Glass User Guide

June 16, 2024
KitchenAid

KitchenAid KCGG530PBK 30 Inch Cooktop Gas On Glass

KitchenAid-KCGG530PBK-30-Inch-Cooktop-Gas-On-Glass-
product

Product Information

Specifications

  • Product Type: Gas Cooktop
  • Model Number: [Model Number]
  • Power Source: Natural Gas
  • Propane Gas Conversion Kit: Included

Product Usage Instructions

Product Registration and Owner Information

To access product registration, warranty information, installation instructions, how-to videos, and additional accessories for your product, use the QR code provided with the product. You can also visit our website at https://www.kitchenaid.com/service-and-support (for U.S.A.) or https://www.kitchenaid.ca/service-and- support (for Canada).

If you purchased a smart appliance, the QR code will provide instructions on how to download the app and connect.

To receive a free printed copy of the information online, call us at 1-800-422-1230 (U.S.A.)/1-800-807-6777 (Canada) or write to us at: KitchenAid Brand Home Appliances Customer Experience Center 553 Benson Road
Mississauga, Ontario L5N 0B7

Operating Instructions

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in the appliance’s Owner’s Manual before operating the cooktop.

Using Your Cooktop

WARNING: Fire Hazard. Do not let the burner flame extend beyond the edge of the pan. Turn off all controls when not cooking. Failure to follow these instructions can result in death or fire.

SELECTING THE PROPER FLAME SIZE

  • High flame: Start food cooking, bring water to a boil, or pan broiling.
  • Low flame: Keep food cooking or keep food warm.

When the cooktop is in use, the entire cooktop area may become hot.

Propane Gas Conversion

IMPORTANT: This cooktop is factory set for use with Natural gas. If you wish to use Liquid Propane, call a licensed professional to install the Propane gas conversion kit (included).

Placement of Burner Heads and Caps

All burner caps and burner bases should be properly installed BEFORE operating the cooktop. Check that the right size head and cap are on the right size burner. Refer to the Burner Placement section for proper burner head placement details.

Lighting the Burners

IMPORTANT: All burners will click/spark when a knob is pushed in and turned counterclockwise towards Ignite. A burner will light while the knob is between the Ignite and Hi position. Surface burners use electric igniters. When the cooktop control knob is turned towards Ignite position, a spark is used to light the burner. This sparking will conclude between the Ignite and Hi positions.

  1. Push in the knob.
  2. Turn the knob counterclockwise to Ignite. Wait until you see a flame.
  3. Turn the knob anywhere between Hi (H) and Lo (L) to the desired setting.

Assembling the Burners

Refer to the provided images for reference only.

FAQ

Q: Can I use this cooktop with Liquid Propane gas?

A: Yes, this cooktop can be used with Liquid Propane gas. A Propane gas conversion kit is included. Please call a licensed professional for installation.

Q: What should I do if the burner flame extends beyond the edge
of the pan?

A: To reduce the risk of fire, always ensure that the burner flame does not extend beyond the edge of the pan. Additionally, turn off all controls when not cooking.

Q: How do I register my product?

A: To register your product, scan the Photo Registration Card or QR code provided with the product. You can also visit our website and register online.

OPERATING INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.
Using Your Cooktop

WARNING

Fire Hazard
Do not let the burner flame extend beyond the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death or fire.

PROPANE GAS CONVERSION

IMPORTANT: This cooktop is factory set for use with Natural gas. If you wish to use Liquid Propane, call a licensed professional to install the Propane gas conversion kit (included).

PLACEMENT OF BURNER HEADS AND CAPS

All burner caps and burner bases should be properly installed BEFORE operating the cooktop. Check that the right size head and cap is on the right size burner.
Refer to the “Burner Placement” section for proper burner head placement details.

LIGHTING THE BURNERS

IMPORTANT: All burners will click/spark when a knob is pushed in and turned counterclockwise towards “Ignite”. A burner will light while the knob is between the “Ignite” and “Hi” position.
Surface burners use electric igniters. When the cooktop control knob is turned towards “Ignite” position, a spark is used to light the burner. This sparking will conclude between the “Ignite” and “Hi” position.
To light the burners:

  1. Push in the knob.
  2. Turn the knob counterclockwise to “Ignite”. Wait until you see a flame.
  3. Turn the knob anywhere between Hi (H) and Lo (L) to the desired setting.

SELECTING THE PROPER FLAME SIZE

The flame size should match the cookware you are using. Watch the flame, not the knob, to adjust the heat. A flame larger than the bottom of the cookware wastes energy and will heat the handle.

  • High flame – Start food cooking, bring water to a boil, or pan broiling.
  • Medium flame – Maintain a slow boil, fry or sauté, thicken sauces, steam, or stew.
  • Low flame – Keep food cooking or keep food warm.

REMEMBER: When the cooktop is in use, the entire cooktop area may become hot.

ASSEMBLING THE BURNERS

Use the following images for reference only

Burner Placement

  • Burner caps and bases are included with your cooktop.
  • Always match the burner cap to the correct base by matching the type markings which can be found on the underside of the burner cap and top interior of the burner base (ex: AUX, SR, R, UR).
  • Always line up the hole in the burner base to the electrode.
  • All-Purpose, Power™, and Even-Heat burners are similar in assembly.

5-Burner 30″ and 36″ Cooktop

  1. All-Purpose burner
  2. Power™ burner
  3. Even-Heat burner
  4. All-Purpose burner
  5. All-Purpose burner

All-Purpose, Power™ Burner and Even-Heat Burners

  1. Burner CapB. Burner Base
  2. Electrode
  3. Burner Base Hole

GRATE PLACEMENT

To install the grates, align the feet on the grates with the burner bezels and align the grate slots with the adjacent grates. Be sure to line up the slots and feet for proper grate alignment.

PRODUCT REGISTRATION AND OWNER INFORMATION

YOUR QR CODE UNLOCKS
Product registration and warranty information, installation instructions, how- to videos, and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and Operating Instructions, Warranty details, and more by visiting our website at https://www.kitchenaid.com/service-and-support, or in Canada at https://www.kitchenaid.ca/service-and-support. This may save you the cost of a service call. To receive a free printed copy of the information online, call us at 1-800-422-1230 (U.S.A.)/1-800-807-6777 (Canada) or write to us at:

KitchenAid Brand Home Appliances
Customer Experience Center
553 Benson Road
Benton Harbor, MI 49022–2692

KitchenAid Brand Home Appliances
Customer Experience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7

Register to access warranty information and receive important notifications related to your product. Scan the Photo Registration Card or QR code to
register your product

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

KitchenAid User Manuals

Related Manuals