NiteSense BB1000 Foldable Bathtub User Manual

FOLDABLE BATHTUB Model: BB1000
USER MANUAL

SAFETY REGULATIONS

Read the instructions carefully
Follow them carefully during installation and use of the product

• Carefully remove the folding tub from its packaging.
• Make sure that your tub is set up on a waterproof and firm level surface to prevent leakage and collapse when the tub is filled with water.
• Close both drain plugs, press firmly and check that no water leaks from the drain section when flling
• Fill the tub with a maximum of 220 litres of water (advice: use shower hose) at a maximum of 41 degrees Celsius.
• Drain the tub by opening the bottom drain and/or side drain plug. It is possible that the water is not completely drained.
• Hold the bath sightly up by the headrest to allow the remianing water to drain away.
• All bathtubs are subject to wear and aging. for this it is very important to dry the bathtub after use with a dry towel, so that no water remains and the tub can be folded dry and store in a safe place. See storage instructions. Overdue  maintenance, worn parts, weaken the tub and cause it to leak.

WARNING

ALLOW CHILDREN TO USE THE BATHTUB ONLY UNDER THE SUPERVISION OF AN ADULT. IGNORING THESE WARNING MAY RESULT IN SERIOUS OR EVEN FATAL INJURIES.

• Take measures in such a way that small children and animals do not have access to the bathtub or the area around it.
• Bath and accessories must only be assembled by adults.
• Do not stand or learn against the edge of the tub to avoid the risk of overturning and damage.
• Stay away from the tub when using alcohol, drug and electronics.
• If you bathe at night, make sure that the room in which the tub is set up is adequately lit.
• Keep the bathtub and surrounding area clean and free from debris. This will prevent possible injuries from tripping, slipping and falling.
• Adults should check the water temperature with their hands before bathing children.

SET UP BATHTUB

WATER DRAIN

3 Steps to Fix Side Drain

1. Unscrew the drain hose attachment.
2. Place the bath plug side on the inside of the tub and reattach the drain hose on the outside of the bath to the bath plug section.
3. Press firmly on all bath plugs to ensure they are closed before filling with water.

WAYS TO USE THE LIDS

STORAGE

WARRANTY

This product comes with a 1 year warranty (including 6 months manufacturer’s warranty).
Keep the proof of purchase carefully, this is your guarantee certificate.

SAVE THIS MANUAL

Documents / Resources

| NiteSense BB1000 Foldable Bathtub [pdf] User Manual
BB1000 Foldable Bathtub, BB1000, Foldable Bathtub, Bathtub
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>