MAXMADE AV-1327W-99 Media Receiver User Guide
- June 16, 2024
- MAXMADE
Table of Contents
AV-1327W-99 Media Receiver
QUICK START GUIDE
AV-1327W-99
Media Receiver with Wireless and Wired CarPlay™ and Android Auto™ featuring a 7″ digital TFT Display
Wiring Diagram – Inputs/Outputs
Note:
When replacing a fuse, make sure to use the correct type and amperage. Using
an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style
fuse located on the power connector.
Wiring Notes:
Subwoofer output
The Subwoofer preamp audio output (Blue jacket with Black RCA) is active in
all audio modes.
Rear camera input
A rear view camera (not included) can be used with the Camera input.
SiriusXM
For more information on how to install the SiriusXM Connect Vehicle tuner,
consult the installation guide included with the tuner(SiriusXM connect tuner
and subscription sold separely).
Installation
Before You Start
- Disconnect negative battery terminal. Consult a qualified technician for instructions.
- Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Control Locations
The radio display features the following functions and displays:
- Home
- VOL+
- VOICE COMMAND BUTTON
- VOL-
- Power/Mute
Tuner Operation
Main Menu
In main menu, press the desired icon to enter the corresponding mode:
Radio/Android Auto/ CarPlay/USB/Bluetooth/AV In/Settings.
USB Operation
From the main menu, touch the USB icon on the main screen.
- Main Menu
- Current Mode Indicator
- Audio button
- Video button
- Keypad
- Repeat
- Random
- Track Down
- Play/Pause
- Track Up
- EQ
SiriusXM® Satellite Radio Operation
From the main menu, touch the SXM icon on the main screen.
- Main Menu
- Band
- Program Information
- Search
- Preset Channel List
- Additional Options
- Preset Buttons
- Direct
- Channel Down
- Channel Up
- Tune / Track Down
- Play / Pause
- Tune / Track Up
General Operation
From the Main Menu screen, select Setup to access the Settings menu and select
from eight categories represented by the icons on the top of the screen:
General, Audio, Display, Others.
Select the category, and adjust any of the available options using the touch
screen.
Audio Operation
Press the “Settings” icon on the main menu screen to adjust Fader and Balance
controls, Equalizer (8-Band Tone Control and 8 Presets EQ Settings).
Wired & Wireless CarPlay Operation
Wired connection
- Connect an Apple CarPlay compatible device to this unit via USB.
- Press the Apple CarPlay icon.
The Apple CarPlay home screen appears.
Wireless connection
Before using Apple CarPlay wirelessly, turn on the Bluetooth/Wifi function on
the Phone.
- Press icon on the main menu;
- Press “ ” to confirm to use wireless CarPlay;
- Press “ ”icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the iPhone, press “Pair” and then press “Allow” for the popups;
- Press “ ” on the screen to confirm to connect;
- Press “Use CarPlay” on the iPhone. The unit configures the connection then starts the application.
Tip: Press “ ” icon. Displays CarPlay device list. This icon appears Only When CarPlay is connected and two or more devices can be used as CarPlay Source.
Wired & Wireless Android Auto™ Operation
Wired connection
- Connect an Android Auto™ compatible device to this unit via USB.
- Press the Android Auto icon.
The Android Auto home screen appears.
Wireless connection
Before using Android Auto wirelessly, turn on the Bluetooth/Wifi function on
the Android device.
- Press icon on the main menu;
- Press ” ” to confirm to use wireless Android Auto;
- Press “ ”icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the Android device, press “Pair” and then press “Allow” for the popups;
- Press “ ” on the screen to confirm to connect;
The unit configures the connection then starts the application.
Tip: Press ” ” icon. Displays Android Auto device list. This icon appears Only When Android Auto is connected and two or more devices can be used as Android Auto Source.
Bluetooth Operation
Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream
audio. it must be authenticated.
This is also referred to as “pair” a device.
Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are
currently connected. Complete the pairing sequence from your Bluetooth device.
Refer to the owner’s manual for your device for more details. The device name
is “BT AUDIO”. The unit can be in any mode of operation when pairing is
performed. On certain phones, pairing may need to be done more than once.
Connect
The head unit will automatically connect to the last connected device when the
connect feature is set to Auto connect On. If the connect feature is set to
Auto Connect Off, the head unit will not automatically connect to any device.
Bluetooth Phone
From the main menu. touch the Bluetooth on the screen. Bluetooth icon will
appear anytime a
Bluetooth device is connected.
Dialing a Number
Press to display keypad and dial a number.
Making and Ending a Call
Press to connect a call, and press to end a call.
Streaming Audio
Press to play or pause the music.
Press to skip to the previous track.
Press to advance to the next track.
study wheel control
TSTEERING WHEEL KEY LEARNING allow you to learn factory fitted steering
mounted audio controls.
- Select Restudy from the wheel key study menu.
- Select required function button key from the listed button.
- After selecting press and release appropriate key on steering mounted audio button.
- After completing learned, exit the learning function by pressing home icon.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
www.maxmade.cn
Building 2, GIEC Industrial Park,
Puzai Road, Pingdi, Longgang
District, Shenzhen. China
1327W-99
Documents / Resources
|
MAXMADE AV-1327W-99 Media
Receiver
[pdf] User Guide
2AT9B-AV-1327W-99, 2AT9BAV1327W99, AV-1327W-99, AV-1327W-99 Media Receiver,
Media Receiver, Receiver
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>