CORSAIR K65 Plus Wireless 75 Precent Rgb Mechanical Gaming Keyboard User Manual

CORSAIR K65 Plus Wireless 75 Precent Rgb Mechanical Gaming Keyboard User Manual

GETTING TO KNOW YOUR KEYBOARD

A-WIRELESS ADAPTER: F・USB TYPE-C-TO-TYPE-A-CABLE
B-ROTARY DIAL: G-2-IN-1-KEY-SWITCH/KEYCAP PULLER
C-WIN/MAC-SWITCH: H-MULTI-PURPOSE INDICATOR
D – 3-WAY-MODE SWITCH: I.BACKLIGHT BUTTON
E – USB TYPE-C-PORT･･･

BEFORE FIRST USE

Charge the keyboard fully before first use by connecting the USB cable (F) to the keyboard USB Type-C port (E) and to an available USB 3.0 or better Type-A port on a compatible device including:

Windows PC®| Apple Mac®| Microsoft Xbox One Microsoft Xbox Series X | S| Sony PlayStation 4
Sony PlayStation 5
---|---|---|---

• Keyboard is compatible out of the box, see corsair.com/xbox-support for details.
• See Connecting to Sony PlayStation section.

MULTI-PURPOSE INDICATOR (H)

MPI serves as an indicator for different scenarios such as

• Status indications when device is turned on
• Indication when a connection is made (wired/2.4GHz/BT)
• Macro recording sequences
• Displaying difference dial functions

Sequence of indication when power on:

1. Battery status
2. Wired/Wireless status
3. BT pairing (only when BT pairing is triggered in BT mode)

CHARGING & BATTERY LIFE

NOTE:

1. All backlighting except indicators turns off when battery level is 20% or below.
2. Device turns off automatically when battery is below 5%.
3. Battery indicator only shows for 3 seconds and turns off after each status change.
4. Multi-purpose indicator (H) will breathe battery status while charging and turns off when charging is complete.

BUTTON & SWITCHES

• On – 2.4GHz
• Off
• On – BLE

|

• On-2. 4GHz & BT: The keyboard remains in wireless mode even when a cable is plugged (to charge).
• Off: Wired mode
• 2.4GHz mode: Indication (H) LED turns solid white 3 seconds if connected, pulsing white if not connected.

WIN/MACS witch (C)|

• Windows
• MacOS

|
Backlight Button (I)| On/off toggle| This button remains functional even when the screen is locked.

CONNECTING VIA BLUETOOTH WIRELESS

K65 PLUS Wireless can store up to three pairing info and can be switched via FN key (see below table for details).

Steps to connect to your host device:

1. Turn on Bluetooth function of your host device such as a phone or tablet. (Bluetooth 4.0 or higher)*
2. Flip to BT mode of the 3-way mode switch (D) at the rear of the keyboard, and it will be in pairing mode automatically.
3. Follow the pairing instructions on your host device to finish pairing.
4. Press ESC to cancel the pairing process and erase the pairing info.
5. To store or toggle to a different BT profile, simply hold FN and BLE (BLE1, BLE2, BLE3) for 3 seconds. Any existing pairing info will be erased when new pairing is triggered.

Shortcut| Function| I n di c at i o n (F)| Status
---|---|---|---
FN +(Press)
| Switch to Bluetooth host 1 mode| Solid Blue (3 sec)| Connected
Pulsing Blue or timing out after 60 secs| Disconnected
FN +(Hold)
| Start Bluetooth host 1 pairing| Rapidly Blinking Blue (120 sec)| Pairing
FN +(Press)
| Switch to Bluetooth host 2 mode| Solid Blue (3 sec)| Connected
Pulsing Blue or timing out after 60 secs| Disconnected
FN +(Hold)
| Start Bluetooth host 2 pairing| Rapidly Blinking Blue (120 sec)| Pairing
FN +(Press)
| Switch to Bluetooth host 3 mode| Solid Blue (3 sec)| Connected
Pulsing Blue or timing out after 60 secs| Disconnected
FN +(Hold)
| Start Bluetooth host 3 pairing*| Rapidly Blinking Blue (120 sec)| Pairing

CONNECTING VIA USB WIRED

1. Connect the keyboard via USB cable to a USB 3.0 Type-A port or better.
2. The keyboard will automatically switch to USB wired mode when mode switch toggles to off.

CONNECTING TO SONY PLAYSTATION

The keyboard also has a special mode to support Sony PlayStation 4 and 5 via 2.4GHz wireless and USB wired modes that can be activated via shortcut.

Shortcut| Function| I n di c at i o n (H)
---|---|---
FN +(Hold for 5 sec)
| Switch to PlayStation Mode| Blinks Blue 5 times over 5 seconds then Solid Blue
FN +(Hold for 5 sec)
| Switch back to standard mode| Pulse Blue 2 times

NOTE: Available functions may be limited depending on gaming console support and application.

SOFTWARE MODE
When iCUE is running the keyboard operates in software mode and is controlled by iCUE. Download iCUE from corsair.com/downloads and install on a Windows PC or Apple Mac to connect all of your CORSAIR iCUE compatible products together in a single interface, giving you complete control of everything from lighting to powerful macros.

HARDWARE MODE
When iCUE is not running or the keyboard is connected to a device that does not support iCUE, the keyboard operates in hardware mode which uses profiles and settings saved to the onboard storage.

STANDARD SHORTCUTS

Windows Only
All below definitions assume FN key is being held and action is output upon press unless otherwise noted

profile:1.   White – Water Color2.   Red – Spiral Rainbow3.   Green – Rain4. Blue – Rainbow Wave|
FN + /?| PRTSC| Print screen key|
FN + O| SCRLK| Toggles Scroll Lock on and off|
FN + P| PAUSE| Pause break key|
FN + Up| | Change dial mode to volume up (clockwise) / down (counterclockwise)| Default mode Press: Mute / unmute
FN + Down| | Change dial mode to scroll up (counterclockwise) / down (clockwise)| Works only when windows support scroll function Press: End of page
FN + Left| | Change dial mode to KB backlight brightness up (clockwise) / down (counterclockwise)| Press: Turn on / off light
FN + Right| | Change dial mode to zoom in (clockwise) / out (counterclockwise)| Press: Reset to default zoom
FN + Delete| Delete| Press FN + Delete for 3 seconds to enable 2.4GHz mode pairing. Delete & MPI will blink for 120 seconds, during which user should insert dongle to complete pairing process|

MAC FUNCTION DEFINITION

Just press the following keys to enable the functions when Mac mode is turned on.

HARDWARE LIGHTING

FN SHORTCUTS LIGHTING INDICATOR

When pressing FN key, all lighting will momentarily turn OFF except for:

Keys that have FN shortcut functions, including predefined ones and macros assigned by user, will have backlighting turned ON in WHITE.

• Aside from current FN shortcuts, indication (H) will also show current profile color.
• Exception cases: when adjusting lighting effect shortcuts such as FN+1~0, or FN+F5/F6, override to show the lighting effect which keeps playing until either FN is released or a different FN+ combo is pressed.

MACRO RECORDING

Step 1: Hold FN + M key to start recording, and indication (H) breathes red.
Step 2: Press any series of standard keys to begin recording, and indication (H) blinks red.

• * Only standard keyboard functions can be recorded and not specialty or onboard functions like

• Profile
• Backlighting effects
• Brightness
• Media
• Win lock

Step 3: Press FN + M key to stop recording, and indication (F) rapidly blinks red.
Step 4: Assign Macro keys by pressing any keys, FN + key, or modifier (CTRL/SHIFT/ALT/ALTGR) + key

• If keys were recorded: Pressing that key or combination saves the macro
• If no keys were recorded: Pressing that key or combination clears any original macro or function saved
  • Except cannot record over these keys or key combinations:
• FN
• All existing predefined FN shortcut combinations
  • Indication (H) displays Win Lock status

NOTE: Once a macro is recorded, it will be remembered even after device is shut down and turned back on, and will not change until users make any changes or enable factory reset.

SWAPPING KEYSWITCHES

The key switches can be removed and replaced with any variety or combination of CHERRY MX RGB mechanical keyswitches. Other third party mechanical key switches with 3-pin and 5-pin design may be compatible, but are not guaranteed to work due to physical differences.

1. Push the 2-in-1 keys itch/keycap puller GI) over the keycap, then lift to remove.

2. Position the tips of the 2-in-1 keyswitch/keycap puller (G) under the keyswitch top and bottom tabs, then press in and lift to remove.

3. Align the new keyswitch’s pins and base with the sockets and opening.

4. Carefully press the keyswitch in until it clicks into place. If you feel any resistance, remove and try again.

NOTE: Be sure to align the new keyswitch properly before insertion to prevent bent pins or damage.

FACTORY RESET

Press and hold FN + Backlight button (I) for 5 seconds. Multi-purpose indicator (H) will blink RED for 5 seconds once reset is activated. The keyboard will turn on with factory defaults.

BATTERY REMOVAL INFORMATION

1. Remove the 8 screws fastening the top and bottom covers

2. Remove the antenna and batterybar cables from the motherboard

3. Remove the lower covered battery assembly from the keyboard

4. Remove the battery from the lower cover mounting compartment

5. Recycle batteries according to local battery disposal rules
   

COPYRIGHT / LEGAL INFORMATION

FCC ID: 2AAFMRGP0156
FCC ID: 2AAFMRGP0170

IC: 10954A-RGP0156
IC: 10954A-RGP0170

© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured

SHOP

• New Products
• Corsair.com Exclusives
• Best Sellers
• Where to Buy
• Certified Refurbished

EX P LO R E

• CORSAIR Innovation
• Custom Cooling
• Best Gaming Accessories
• Intel 12th Generation Upgrades
• AMD AM5 Upgrades
• DDR5 Memory

COR SAIR

• About
• Investor Relations
• Supply Chain Disclosure
• Careers
• Social Impact
• Press Room
• Contact Us
• Blog
• Board Diversity Matrix

SUPPORT

• Downloads
• Customer Support
• Warranty
• RMA/Returns
• Terms of Sale

BE THE FIRST TO KNOW

GET SPECIAL OFFERS, EXCLUSIVE PRODUCT NEWS, AND EVENT INFO STRAIGHT TO YOUR INBOX.

ENTER EMAIL ADDRESS: SIGN UP

References

• Corsair.com
• CORSAIR Downloads | CORSAIR iCUE Software

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>