ProtoArc EK01-NL Wireless Ergonomic Keyboard User Manual

ProtoArc EK01-NL Wireless Ergonomic Keyboard

support@protoarc.com
www.protoarc.com

Product Features

2.4GHz Connection Steps

1. Switch the keyboard power ON.
2. Take out the USB receiver.
3. Plug the USB receiver into the USB port of the computer.
4. Press key to switch to 2.4G channel, the white indicator will flash slowly, the keyboard now is in 2.4G mode.

Bluetooth Connection Steps

1. Switch the power ON.

2. Press the channel key to choose a bluetooth channel (I /(I, when the indicator light flashes slowly, keyboard is in the corresponding channel.

3. Hold and press the channel key for 3 to 5 seconds, the white indicator will flash quickly, the keyboard now enters bluetooth pairing mode.

4. Open “Settings” and Click Bluetooth Devices.

5. Choose “Add / Delete Bluetooth Devices”.

6. Search for “ProtoArc EK01-NL” and click “Pair”.

7. Pairing is complete when it shows “ProtoArc EK01-NL Connected”.
   Mac OS
   Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.

8. Find “System Preferences” on Mac.

9. Turn on “Bluetooth” in System Preferences, search for “ProtoArc EK01-NL”.

10. Click “Pair”, then wait until it shows “connected” for pairing to complete .
    iOS
    Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing. C,

11. Open “Settings” and turn on Bluetooth.

12. Choose “ProtoArc EK01-NL” from the list and click “Pair”.

13. Pairing is complete when ii shows “ProtoArc EK01-NL Connected”.
    Android System
    Complete Keyboard Bluetooth Connection Steps 1, 2 and 3 before pairing.

14. Open “Settings” and turn on Bluetooth.

15. Bluetooth search and click to pair the “ProtoArc EK01-NL”.

16. Pairing is complete when it shows “ProtoArc EK01-NL Connected”.

How to Switch Device Channels

Keyboard Charging

When battery is low, the power indicator light will start to flash until the keyboard turns off. Please recharge as soon as possible to ensure best user experience. Low battery may cause poor connection quality, resulting delays or other problems while using.
The power indicator light is red while charging and will turn green when fully charged. One full charge cycle takes about 2-3 hours.

Multimedia Function Button

NOTE: The FN function is for alternate commands (F1-F12 & multimedia functions are dual-use keys).

Product Specification

Tips

1. If keyboard fails to connect, switch the keyboard power OFF then turn it back ON, retry the Bluetooth connection procedures again. Clear the current Bluetooth connection list, remove current devices and then reconnect.
2. To switch to a already connected channel, please wait for 3 seconds after pressing the switch device button for it to respond.
3. The keyboard has memory function, when a keyboard channel is successfully connected, that channel connection will remain connected in the default channel. The corresponding indicator light will be on.

Sleep Mode

1. When the keyboard stays idle for more than 30 minutes, it will automatically enter sleep mode and the indicator light will be off.
2. To wake the keyboard simply press any key on the keyboard and it will be ready within 3 seconds. The indicator light will turn on again.

What’s In Package

• 1 x Wireless Bluetooth Keyboard
• 1 x USB Receiver I
• 1 x Type-C Charging Cable
• 1 x User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>