BRILONER MAL 3758-416 LED Ceiling Lamp Installation Guide
- June 16, 2024
- BRILONER
Table of Contents
BRILONER MAL 3758-416 LED Ceiling Lamp
Product Information
- Model Number: MAL 3758-416
- Manufacturer: Briloner Leuchten GmbH & Co. KG
- Address: Am Steinbach 14, D-59872 Meschede
- Revision: 02_06/2023
Specifications
- The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
- Disconnect the main cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to OFF.
- Before drilling the mounting holes, make sure that no gas, water, or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
- The symbol of the crossed-out garbage can on the product or packaging means that the product must not be disposed of with ordinary household waste.
Product Usage Instructions
Installation
- Ensure that the lamps are installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Before connecting to the mains, check the entire light for possible damage. Do not use the light if any damage is noticed.
- Disconnect the main cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to OFF.
- Ensure that no gas, water, or electricity pipes and wires can be drilled through or damaged in the chosen mounting location before drilling the mounting holes.
- Mount the fixture using a suitable attachment material that is suitable for the subsurface and capable of carrying the weight of the fixture.
Maintenance
The maintenance of the lights is limited to the surfaces. Do not clean the
product with water or other liquids. Use only a dry, lint-free cloth for
cleaning.
Mounting instructions
Safety Directions
Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
- The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
- Caution! Disconnect the main cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to “OFF”.
- Caution! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
- The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance. Disposing of this product in line with local regulations helps to mitigate the effects on the environment and health which might otherwise occur as a result of hazardous substances, combinations or components.
- Safety class II . This light is specially insulated and must not be connected to an earthed conductor. Description of the supply terminals: L = Phase N = Neutral conductor = Earthed conductor.
- Protective covers and end covers for mains voltage control parts must always be mounted.
- Do not install the light on a damp or conductive subsurface. Please make sure that no cables get damaged during the installation work.
- Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
- The lights have a protection class rating of “IP44“ and are solely intended for indoor use only in private households. IP degree of protection applies for ceiling suspension only. To comply with the IP protection class rating, the lights may only be mounted on flat surfaces.
- Do not look directly into the light source (illuminant, LED, etc.).
- The included or insertable LED light bulb contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
- This product contains a light source of energy efficiency class „F“, based on the EU regulation 2019/2015.
- LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LEDs can also change as a result of the life span level of the lamp.
- This article is not suitable for use with dimmable electric circuits.
Frequently Asked Questions
-
Q: Can I clean the lights with water?
A: Well, for electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning. -
Q: What should I do if I notice any damage to the light?
A: Before connecting to the mains, always check the entire light for possible damage. If any damage is noticed, do not use the light. -
Q: Can I dispose of the product with ordinary household waste?
A: Well, the symbol of the crossed-out garbage can on the product or packaging means that the product must not be disposed of with ordinary household waste.
Dear customer.
If, contrary to expectations, defects turn out despite the latest
manufacturing methods and the most precise quality controls, please contact
the following free hotline, stating the date of purchase, the place of
purchase and the item number of the product: 00800/BRILONER (00800/27456637)
Briloner Leuchten GmbH & Co. KG / Am Steinbach 14 / D-59872 Meschede.
Revision 02_06/2023.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>