WOODEN Digital Alarm Clock with Wireless Charging Station User Guide

WOODEN Digital Alarm Clock with Wireless Charging Station

Product Information

• Specifications
  • Operating voltage: DC5V/2000MA or 4 No. 7 dry batteries (AAA) Calendar runs from 2000 to 2099
  • Display modes:
  • Dp-1: time, temperature, year, month, and day automatically switch the display
  • Dp-2: displays only the time, temperature, and humidity 12/24 hour format Three sets of 1-minute alarms Voice switch for adjusting volume
  • Alarm setting for weekdays
  • Power options: power adapter (AC110v-240v, 50/60Hz) or AAA*4 batteries Wireless charging compatible with devices following QI standard

Product Usage Instructions

• Initial Setup
  • Open the product package and check for the following accessories:
  • One digital wooden clock
  • A copy of the operation manual
  • A USB line
  • Connect the power adapter to the clock or insert AAA batteries for backup.
• Display and Key Introduction
  • The display shows various information such as time, temperature, year, month, day, and humidity. The keys on the clock have the following functions:
  • RESET button: Start/RESET function
  • SET key: Used for function settings
  • UP key (UP): Used for adjusting settings upward
  • DOWN key (DOWN): Used for adjusting settings downward
• Function Settings
  • In the normal display state, long press the SET key (SET) for 3 seconds until the display starts flashing.
  • Setting sequence:
    • Year
    • Month
    • Day
    • 12H / 24H hour
    • Minute
    • Alarm clock (A1, A2, A3)
    • Workday alarm switch
  • To adjust settings, follow these steps:
    • Press the UP key (UP) or DOWN key (DOWN) to adjust the value upward or downward.
    • Press the UP key (UP) or DOWN key (DOWN) for fast forward or back.

FAQS

• Q: Can I use the clock with batteries only?
  • A: Yes, you can use AAA batteries as a backup power source. However, it is recommended to enable the voice control function when using batteries.
• Q: What is the wireless charging standard supported by the clock?
  • A: The clock supports wireless charging for devices that follow the QI standard.

Product introduction

1. Start/RESET: RESET button
2. Functional Features:
   • Operating voltage: DC5V/2000MA or 4 No. 7 dry batteries (AAA)
   • The calendar runs from 2000 to 2099 for 100 years.
   • Display: Two display modes
   • Dp- 1: time, temperature and year, month, day automatically switch display; Humidity fixed display
   • Dp-2: displays only the time, temperature, and humidity
   • 12/24: You can switch to 12/24 by default on January 1, 2016, at 12:00 a.m
   • Three sets of 1-minute alarms
   • Voice switch free adjustment (press Down key), display “ON: SD” for voice ON, “ONE: SD” for voice off.
   • Alarm setting ON weekdays (long press the SET key to enter the setting, ON E is ON, that is, no alarm on Saturday and Sunday; –E is for off, that is, ringing the alarm every day from Monday to Sunday.)
3. Product routine configuration
   • Tips: When you open the product package, please check whether there are the following accessories in thebox:
   • One digital wooden clock
   • A copy of the operation manual
   • A USB line is the main technical parameter of the product
   • The product can be used directly with a power adapter. The output voltage of the power adapter:
   • Is ac110v-240v, 50/60Hz, output voltage of the power adapter: is DC5V/2000MA.
   • You can also use AAA*4 batteriesfor backup. (It is recommended to enable the voice control function when using batteries.)
   • In voice mode, when the close sound is greater than 60 decibels, it can wake up the display.

Display and key introduction

1. Display function description button instruction
   • Operation detail chart

Function Settings

In the normal display state, long press the SET key (SET) for 3 seconds, display flashing.

• Setting sequence: Year – month – day → 12H / 24H→ hour – minute → alarm clock (A 1- hour – minute, A2- hour – minute, A3- hour-minute) → workday alarm switch.

• Setting: Press and hold the setting key (SET) for three seconds, the “year” position is flashing, the pressure(UP)/DOWN key (DOWN) can be adjusted UP or DOWN, long press can fast forward/fastback

• Month setting: After the “year” setting is completed, press the SET key (SET) to enter the month adjustment, the “month” position is flashing, press the UP key (UP)/DOWN key (DOWN) to adjust UP or DOWN, long press can fast forward/fastback.

• Day setting: after the “month” setting is completed, press the SET key (SET) to enter the “day” adjustment, the”day” position flashing, press the UP key (UP)/ DOWN key (DOWN) to adjust UP or DOWN, long press can fast forward/fastback.

• 12/24H setting: After setting “Day”, press the SET key (SET) to enter the 12/24 hour adjustment, and press UPkey(UPkey)/DOWN key (DOWN key) to switch to the 12/24 hour system.

• When setting: 12/24h after setting, press SET key (SET) to enter “when” adjustment, “when” position flashing, press UP key (UP)/ DOWN key (DOWN) can be adjusted UP or DOWN, long press can fast forward/fast rewind.

• Points setting: after setting “time”, press the SET key (SET) to enter the “points” adjustment, and “points” position, press the UP key (UP)/DOWN key (DOWN) can be adjusted UP or DOWN, long press can fast forward/fastback.

• Settings of alarm clock A1 mode: After the settings of minutes are set, short press the (Set button), and the mode shows –A1. If you press the UP button, A1 will be shown. Then press the SET button, after the number
  flashes, press the UP or DOWN button, and long press the button, can move forward or retract quickly. PresstheSET button again, after the number of minutes flashes, press the UP or DOWN button, and long press thebutton, it can move forward or retract quickly.

• Settings of Alarm Clock A2 Mode: After the settings of Alarm Clock A1 mode are set, press the(Set button), and the mode shows –A2. If you press the UP button, A2 will be shown. Then press the SET button, after the number of hours flashes, press the UP or DOWN button, and long press the button, can move forward or retract quickly.

• Settings of alarm clock A3 mode: After the settings of alarm clock A2 mode are set, press the (Set button), and the mode shows –A3. If you press the UP button, A3 will be shown. Then press the SET button, after the number of hours flashes, press the UP or DOWN button, and long press the button, can move forward or retract quickly.

• Alarm setting on working day: After the settings of alarm clock A3 mode are set, press the (Set button), which shows ”–E”. If you press the UP button, “on E” or “–E” will be displayed. “on E” means no alarm on weekends.‘’–E’’ means that the alarm also sounds on weekends.

• Function of the UP button: Up adjustment, brightness adjustment, temperature/bride conversion. Short pressthe UP button to display the temperature “C” Celsius, and press the UP button again to display the “F” degree Fahrenheit.

• Sound control mode: Long press the DOWN button to switch the sound control mode. “–sd” shouldswitchoffthe sound control, “on sd” should open the sound control.

• Brightness adjustment: Press the UP button for 3 seconds to display the normal brightness “L3”, and then press the UP button to make the brightness of “L2” weakened, and then press the UP button to display the brightness of “L1”. Press the Down button to increase the brightness. After the setting is completed, the termination setting will be automatically saved after 3 seconds.

• The Reset button: If the operation error or improper operation causes the crash, press the Reset button to reset.

Wireless charging parameters

• Output: 5V 1A;
• Charging current : 2000MA(different models of mobile phones or receiver devices vary);
• Launch distance: 5mm;
• Conversion efficiency: 75%;
• Charging mode: electromagnetic induction mode;
• Working frequency: L00-205khz;

Matters need attention

• The product is an all-wood outer box, please use it in a dry and ventilated environment, and pay attention to moisture, for a long time in subversion vibration, heavy, high temperature or temperature change places.
• Please be careful not to fall when using, it to avoid damage to the edges or corners of the product.
• When using this product, it is best to use high-energy AAA alkaline batteries. If the display turns dark or keeps flashing, it indicates that the AA battery is almost out of power.
• Please replace the battery in time to prevent battery leakage and damage to the product. If you cannot maintain normal travel time during a power outage, please confirm whether the built-in battery (CR2032) is installed properly or may be out of power.
• Please replace the built-in battery in time.
• If you want to use this product with your power adapter, the power adapter you choose must have a steady output of 5V/2000MA and its output plug should match the socket of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>