Keychron K6 Wireless Mechanical Keyboard User Guide

A Sleek, Compact Wireless Mechanical Keyboard

K6 Wireless Mechanical Keyboard

A tactile mechanical keyboard for peak productivity

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.

1. Connect Bluetooth
   Switch toggle to Bluetooth
   Press fnl + Q (for 4 seconds) and pair with device named Keychron K6

2. Connect Cable
   Switch toggle to Cable
   Switch to wired mode after conected the cable to your keyboard.

3. Change Light Effect
   Press light effect keyFor RGB version – Press fn1 + right arrow /left arrow to change color

4. Multimedis ey and Function Key
   Mtinedis kevsFunction keysIn order to get Multimedia Key, you need to press fnl andKey.
   In order to get Function Key, you need to press fn2 andkey.

5. Disable Auto Sleep Mode
   ‘The keyboard goes to Auto Sleep Mode in 10 minutes of siting idle to save battery.Press fn1 + S + O (for 4 seconds) to disable the Auto Sleep Mode.

6. Remap keys
   We don’t have an official software to remap the keys yet.
   But you can use these two software to get the job done. (Bxcept the light effect key)
   6.5 Linuxs setting
   We have a Linux user group on facebook. Please search “Keychron Linux Group on facebook. So you can have better experience with our keyboard.

7. Tum Off the Backlight
   In order to turn up the brightness of the backlight, you need to press fn1 +
   In order to turn down the brightness o the backlight, you need to press fn1 +
   Press the fnl +light effect key to quick turn on and off of the backlight.

8. Switch Betueen The Right Control Key and The Right Alt Key in Windows.
   Press fn1+K+R for 4 seconds) to switch between these two layout.

Not Happy
****support@keychron.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>