Shark HD352DE SpeedStyle Powerful Hairdryer And Gloss Finish User Manual

: June 16, 2024
: Shark

Table of Contents

Shark HD352DE SpeedStyle Powerful Hairdryer And Gloss Finish
Product Information
Product Usage Instructions
FAQS
IMPORTANT SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
OPERATING INSTRUCTIONS
TROUBLESHOOTING & ERROR CODES
OVERHEATING
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark HD352DE SpeedStyle Powerful Hairdryer And Gloss Finish

Shark-HD352DE-SpeedStyle-Powerful-Hairdryer-And-Gloss-Finish-
PRODUCT

Product Information

Specifications
- Product Name: SpeedStyle
- Intended Use: Hair styling appliance
- Power Source: Electric
- Power Consumption: [insert power consumption]
- Attachments: Original Shark attachments only

Product Usage Instructions

Important Safety Instructions
- When using electrical appliances, especially when children are present, basic safety precautions should always be followed.
- Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
General Safety Precautions
- Always unplug the unit immediately after using it.
- Do not use the appliance while bathing.
- Do not place or store the appliance where it can fall or be pulled into a bath or sink.
- Do not place in or drop into water or other liquid.
- If the appliance falls into water, unplug it immediately before removing the unit. Do not reach into the water.
- An appliance should never be left unattended when plugged in. Unplug it after use, especially when used in a bathroom.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities unless supervised by a responsible person.
- Children should be supervised to ensure they do not play with the appliance.
- Use the appliance only for its intended use as described in the manual.
- Only use original Shark attachments for safe use of the product.
- Never operate the appliance if it has a damaged cord or plug, is not working properly, or has been dropped into water. Contact Shark customer service for examination and repair.
- Keep the cord away from heated surfaces and do not wrap it around the appliance.
- Never block the air openings of the appliance or place it on a soft surface where the air openings may be blocked. Keep the air openings free of lint, hair, and similar materials.
- Never use the appliance on someone who is sleeping.
- Do not drop or insert any object into any opening of the appliance.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- Avoid directing hot air towards the eyes or other heat-sensitive areas.
- Attachments may become hot during use. Allow them to cool before handling.
- Do not place the appliance on any surface while it is operating.
- Keep your hair away from the air inlets while using the appliance.
- Do not operate with a voltage converter.
- Do not use this appliance on hair extensions or wigs unless recommended by the hair extension or wig manufacturer.
- If using hair styling products in conjunction with this appliance, read and follow all safety warnings and instructions provided by the hair styling product manufacturer.

FAQS

Q: Can I use this appliance on wet hair?
- A: No, it is not recommended to use the appliance on wet hair. Please ensure your hair is dry before using the SpeedStyle.
Q: Can I use an extension cord with this appliance?
- A: No, it is not safe to use an extension cord with the SpeedStyle. Please plug the appliance directly into a suitable power outlet.
Q: How should I clean the attachments?
- A: To clean the attachments, detach them from the appliance and wipe them gently with a damp cloth. Ensure they are completely dry before reattaching them to the SpeedStyle.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following: FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS

Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
WARNING— To reduce the risk of death by electric shock:

Always unplug the unit immediately after using it.
Do not use it while bathing.
Do not place or store appliances where they can fall or be pulled into a bath or sink.
Do not place in or drop into water or other liquid.
If an appliance falls into the water, unplug it immediately before removing the unit. Do not reach into the water.
- WARNING— To reduce the risk of burns, electrocution, fire or injury to persons:
An appliance should never be left unattended when plugged in. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Use this appliance only for its intended use as described in this manual.
Only the use of original Shark attachments is allowed for the safe use of the product.
Never operate this appliance if it has a damaged cord or plug if it is not working properly or if it has been dropped, damaged or dropped into water. Contact Shark customer service for examination and repair.
Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or sofa, where the air openings may be blocked. Keep the air openings free of lint, hair and the like.
Never use it on someone who is sleeping.
Never drop or insert any object into any opening.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
Do not direct hot air toward eyes or other heat-sensitive areas.
Attachments may be hot during use. Allow them to cool before handling.
Do not place the appliance on any surface while it is operating.
While using the appliance, keep your hair away from the air inlets.
Do not operate with a voltage converter.
Do not use this appliance on hair extensions or wigs unless recommended by the hair extension or wig manufacturer.
If a hair styling product is being used in conjunction with this appliance please read and follow all of the hair styling product safety warnings and instructions before use.

TECHNICAL SPECIFICATIONS

Voltage: 220-240V, 50-60Hz, 1700W

When a consumer buys a product in Europe, they get the benefit of legal rights relating to the quality of the product (your statutory rights).
You can enforce these rights against your retailer.
However, at Shark® we are so confident about the quality of our products that we give you an additional manufacturer’s guarantee of two years
These terms and conditions relate to our manufacturer’s guarantee only – your statutory rights are unaffected.
The conditions below describe the prerequisites and scope of our guarantee. They do not affect your statutory rights or the obligations of your retailer and your contract with them.

Shark® Guarantees

Your Shark unit constitutes a sizeable investment. Your new hairdryer needs to work properly for as long as possible. The guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and
manufacturing quality.
Every Shark machine comes with free parts and a labour guarantee. You’ll also find online support at sharkclean.eu.

How do I register my Shark guarantee?

You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your hairdryer:
Date you purchased the unit (receipt or delivery note). To register online, please visit sharkclean.eu.

IMPORTANT

The guarantee will only cover your product from the date of purchase. Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your guarantee.

What are the benefits of registering my free Shark guarantee?
- When you register your guarantee we’ll have your details to hand if we ever need to get in touch.
- You can also receive tips and advice on how to get the best out of your Shark unit and hear the latest news about new Shark® technology and launches. If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
How long are new Shark machines guaranteed for?
- Our confidence in our design and quality control means that your new Shark unit is guaranteed for a total of two years.
What is covered by the free Shark guarantee?
- Repair or replacement of your Shark machine (at Shark’s discretion), including all parts and labour. A Shark guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark guarantee?

1. Normal wear and tear of wearable parts (such as accessories). Replacement parts are available for purchase at [sharkclean.eu](http://sharkclean.eu)
2. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance or damage due to mishandling in transit.
3. Damage caused by maintenance not authorised by Shark.

Where can I buy genuine Shark spares and accessories?
- Shark spares and accessories are developed by the same engineers who developed your Shark unit.
- You’ll find a full range of Shark spares and replacement parts/accessories for all Shark machines at sharkclean.eu.
- Please remember that damage caused by the use of nonShark spares may not be covered under your guarantee.

OPERATING INSTRUCTIONS

Slide the power button to turn the dryer on and off.
Press the airflow button to choose a low, medium, or high airflow.
Press the temperature button to choose no heat, or low, medium, or high temperature.
Press and hold the Cool Shot button for a cool burst of air to set your style.
To attach any accessories included with your model, press them into the nozzle outlet. You will know they are properly attached when they click in place.
To remove an accessory, slide the lockdown and lift the accessory of the nozzle by holding onto the touchpoints identified in your Styling Guide.
To remove the filter cover, twist it off the back of the unit. To attach the filter cover, twist it back onto the back of the unit clockwise.
Rating label location.

For further operating instructions, please consult the Styling Guide.

Storage, Cord Safety, and Maintenance/Cleaning:

Ensure the cord is not knotted, twisted, or wrapped around any nearby objects when in use.
Store the unit in a dry location away from water and other heat sources.
Store brush accessories so the bristles are not touching any surfaces to help prevent bristle damage
Clean the filter on the back of the unit monthly.
To clean the filter, first twist the filter cover counterclockwise off the back of the unit, then use a new toothbrush to brush off any dust or debris on the filter.
Once the filter is clean, twist the filter cover back onto the back of the unit.
Remove any hair on the brush accessories after every use to help maintain performance. $Shark-HD352DE-SpeedStyle-Powerful-Hairdryer-And-Gloss-Finish-FIG-1 $1$$ $Shark-HD352DE-SpeedStyle-Powerful-Hairdryer-And-Gloss-Finish-FIG-1 $2$$

TROUBLESHOOTING & ERROR CODES

MAINTENANCE/CLEANING

Reduction in airflow.
- A change in airflow or air power, airflow blockages, and/ or visible buildup on the inlet at the back of the unit could indicate your unit needs to be cleaned.
- To maintain performance, clean the filter at the back of the unit every month, using a new
- toothbrush.
Removing the Filter
- Turn off the unit and unplug it. Rotate the filter cover on the back of the unit counterclockwise, then pull it off.
- Then rotate the filter counterclockwise and pull it off.

Cleaning the Filter

Soak the filter in warm, soapy water for at least 30 minutes.
Wipe down the back of the unit with a dry microfibre cloth or a new toothbrush to remove the debris.
After 30 minutes, remove the filter from the water and rinse it thoroughly under a tap.
Pat the filter dry with a microfibre cloth. Let the filter air dry completely for up to 24 hours before reinstalling.
To reinstall the filter, reinsert it and rotate it clockwise. Then align the filter cover and rotate it clockwise until it fits securely.
If you are experiencing a different error code, contact Customer Service at 0800 862 0453.

OVERHEATING

The hair dryer is overheating or shuts off.
This unit is equipped with a temperature-protective thermostat.
If for some reason your hair dryer overheats, the thermostat will automatically turn the unit off.
To prevent a power-down recurrence, unplug the hair dryer and set it aside to cool, or press the Cool Shot button during use.
Overheating may result if the unit is powered on for a long duration.
Overheating can also indicate a blockage or dust buildup.
To prevent overheating, clean the filter at the back of the unit every month, using a new toothbrush.

Make sure you are not covering the filter with your hand when operating the unit, as this could also cause overheating. If overheating continues to occur, contact Customer Service at 0800 862 0453.