wopet F01 PLUS Automatic Dog Feeder User Guide
- June 16, 2024
- WOPET
Table of Contents
wopet F01 PLUS Automatic Dog Feeder
Panel Introduction
Program Setting
Our device uses a 24- hour clock system, for example, 16:00 is equivalent to 4:00 PM
STEP 1— Unlock Screen
Press and Hold for 2s to unlock the screen.
STEP 2— Set the Current Time
Note: The feeder can work well only when the time of the feeder is consistent with the current time.Press and hold for 2s to enter setting mode.Press and to set the current time. Press again to save and continue to meal settings.
STEP 3.1— Set Feeding Portion
ML 1″ flashes. Press to confirm the meal and continue to set portion size.Press and to adjust the portions. When the portion is set, press to save and set the feeding time.
STEP 3.2— Set Feeding Time
Press and to set the hour, then press to save to entering the minute setting.
STEP 3.3— Set Other Meals
Repeat the steps for 2-5 meal, when finished the all meals setting, press to save.
FAQs
Why is there no response to pressing any button?
After powering on, Press and hold the lock button for 3 seconds to unlock the screen, and then click the setting button to enter the setting mode.
Why wasn't the food distributed at the set time?
Ensure the food size is less than 12mm, only suitable for dry food. Check whether the food bowl is full of food, whether there is food residue at the food outlet if so, please clean up in time.) If the spotlights detect food residue at the food outlet, the food behind will not be distributed. Check if the turntable is jammed, if so please clean it first.
What is the amount of 1 portion？
One portion is about 10g.
How do I cancel the third feeding schedule?
Please set the feeding portion to 0
Please set the feeding portion to Thank you for choosing Olelica pet feeder.
Please read the quick guide before using, if you have any problems when using
our product, kindly send email with order number to our mailbox:
support@wopet.com
for help,we’ll response within 24 hours.