SONRU Al1002 Digital Alarm Clock Wireless Charging User Manual
- June 16, 2024
- sonru
Table of Contents
- Al1002 Digital Alarm Clock Wireless Charging
- Product Function
- Product Picture
- Button Introduction
- Display Mode
- The Brightness Settings
- Temperature Unit Conversion
- Clock Settings
- Stop Alarm or Snooze?
- Date and Time Settings
- How to Power It?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Alarm Clock Wireless Charger
UserManual
Al1002 Digital Alarm Clock Wireless Charging
Important
For any questions or comments about our products, or if there is a quality
problem with the product for which you wish to request a REPLACEMENT or a
REFUND, please send an email to our after sales team and we will reply you
within 24 hours.
UK after sales team:
sales-uk@sonrudirect.com
US/CA after sales team:
sales-us@sonrudirect.com
Product Function
1.1 Alarm clock
- LED display date, time, temperature
- 12H/24H display
- Three brightness levels, 5% 50% 100%
- Three Alarms, A1 A2 A3
- Support snooze function
- Five buttons for convenient operation: TIME, ALARM, SNZ, UP, DOWN
- Alarm clock setting for working days (5-day system or every day)
- Support turn off LED screen
- Memory function
1.2 Wireless charger
10W wireless fast charging suitable for all Ql enabled smart phones.
- iPhone or above
- Samsung S7 or above
- other mobile phones that support wireless QI protocol
Note:
- Please use a power adapter above 5V/2A to power the alarm clock. If the power adapter is below 5V/1A, it will reduce the efficiency of the wireless charging function.
- Properly place the phone on the alarm clock for effective wireless charging. Make sure the thickness of your phone case < 5mm.
Product Picture
Button Introduction
- TIME: clock mode, display mode selection
- ALARM: alarm setting
- SNZ: snooze, brightness setting
- UP: increase, Celsius to Fahrenheit conversion
- DOWN: decrease
Display Mode
In any mode, simply press the “TIME” button to change the display mode.
dP-1: Time, temperature, and date Cyclic display
dP-2: Time and temperature fixed display
The Brightness Settings
In any mode, press the “SNZ” button to adjust the screen brightness from 100%,
50%, and 5% successively.
Long press the “SNZ” button for 3 seconds to turn off the screen display,
press any key can light up the display again and keep the brightness setting
set at the last time.
Temperature Unit Conversion
Press the “UP” button in any mode to select ” C/° F.
Temperature range: -10″ C~SO” C(32” F~ 122″ F)
“HI” is displayed above 50° C, “LO” is displayed below -10° C.
Note:
- There will be a temperature difference of +/-4° F, +/-2° C.
- Using the wireless charging function will cause heat, and the displayed temperature will also increase at this time. It will return to normal after charging finished.
Clock Settings
Press the “ALARM” button in any mode to view ALARM settings of A1, A2, A3, and alarm set of working days.
-
Setting alarm 1:
Press “ALARM” button to enter the alarm 1 mode, long press “ALARM” for 2 seconds, “hour” starts to flash, and then press “UP” or “DOWN” to change it. After setting “hour”, press “ALARM” again, “minute” starts to flash, and then press “UP” or “DOWN” to change it. After setting, press “ALARM” to confirm the setting, press “UP” or “DOWN?” to enable or disable, alarm on will display “oNA1”, alarm off will display “–A1”. -
Setting alarm 2 and alarm 3 is the same as the setting of alarm 1.
-
Weekday alarm settings:
Press “ALARM” button four times to enter weekday alarm setting, press “UP” or “DOWN” to enable or disable it, “oNE” means alarm only rings from Monday to Friday; “–E” means alarm rings every day.
Stop Alarm or Snooze?
When the alarm rings, press “SNZ” button to enter the snooze mod and the alarm
will ring again after 10 minutes.
If you want to stop the alarm, you can press any other button once.
Date and Time Settings
In any mode, long press “TIME” button for 2 seconds, and the “year” starts to
flash, press UP or DOWN to set the “year”, press “TIME” after setting. Set
“month” and “day” in the same way. Press “TIME” to enter the selection mode of
12-hour system and 24-hour system, press UP or DOWN to select “24H” or “12H”.
Press “TIME” to enter the setting of HOUR and MINUTE, press UP or DOWN to set
it, and press “TIME” to confirm the setting.
How to Power It?
Input voltage of the power adapter: AC110V-240V, 50/60Hz.
Note:
The CR1632 battery on the back is only for time memory, not for clock or
charging.
When the CR1632 battery is of low power, it will lose memory function (please
change the battery to ensure time accuracy). When no power supplied, the
product will reset to full display, beep 3 times, and enter the clock mode,
this case please reset the clock to the correct one.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>