SONRU WP20 Wireless Car Charger
- June 14, 2024
- sonru
Table of Contents
SONRU WP20 Wireless Car Charger
Product Introduction
This product is an intelligent wireless charging device with auto induction shrinkage, It allows you to easily experience the infinite fun of smart digital products.
Product Description
Installation Steps (air outlet clip)
- Install the air vent clip as picture.
- Open the clip and insert the air vent blade, adjust the angle of the mobile phone and the support rod, and then tighten the knob to complete the installation.
Installation steps (large suction cup bracket)
- Connect the suction cup base to the product, insert the universal ball into the nut first, then insert it into the bolt on the back of the product and tighten the nut clockwise.
- Place the base on the dashboard or windshield, press the vacuum switch to fix it.
- Open the retractable arm, stretch and adjust the support arm.
- Loosen the knob of the suction cup base counterclockwise, the support rod can be rotated at multiple angles to adjust the viewing angle.
Phone Charging
-
Use the Type-C cable in the package to connect the holder to the car charger, and the left and right clamping arms and bottom brackets open automatically.
-
Place the phone on the wireless charging bracket, the clamping arm and the bottom bracket automatically clamp the mobile phone.
-
Press the switch button on one side, the clamp arm will automatically open, and the phone can be taken out at this time.
Product Parameter
- Material: ABS+PC+Acrylic surface
- Input: 5V/2A, 9V/2A, 12V/1.5A
- Output: 5W / 7.5W / 10W / 15W (MAX)
- Input port: Type C
- Applicable size: 4.5-6.7 inch mobile phone
- Applicable place: Air outlet/ Dashboard/ Windshield
Precautions
- Please place it out of the reach of children.
- Cannot be used in humid environments.
- It is forbidden to disassemble the product without authorization.
- Please avoid violently hitting or bumping this product.
- Non-professionals, please do not open or repair this product by yourself.
- This product belongs to the motor gear bite control, please do not use external force to move the left and right clamp arms.
- Pay attention that this product needs to be equipped with QC2.0/QC3.0 and other formal certified car chargers to adapt.
- This product uses the principle of wireless charging and capacitive sensing, which is put and used, touch and take.
Tips
The back of the phone cannot have ring buckles, items that increase the thickness of the phone, or metal objects. The above items will affect the use and charging efficiency of the phone’s wireless charging.
Contact US
For any questions or comments about our products, or if there is a quality problem with the product for which you wish to request a REPLACEMENT or a REFUND, please send an email to us and we will reply you within 24 hours.
- UK service team: sales-uk@sonrudirect.com
- US service team: sales-us@sonrudirect.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>