HONGHOO BD-C6 Pocket Camcorder Instruction Manual
- June 14, 2024
- HONGHOO
Table of Contents
HONGHOO BD-C6 Pocket Camcorder
Product Information
The product is equipped with an HD lens, WiFi indicator light, turn-over indicator, video indicator, camera indicator, recording indicator, and night vision indicator light. It also has a charging indicator light, flip key, TF card slot, microphone hole, power key, and charging interface. The product supports the use of a TF card with a capacity of 4-256G and a C10 high-speed card.
Product Usage Instructions
Mode of Use:
The product can be adjusted according to requirements during use.
- Install a TF card by inserting it into the TF card slot.
- Ensure that the original TF card is used.
- Supports TF cards with a capacity of 4-256G and C10 high-speed cards.
Use Tutorial:
Key Description:
- Power key: Long press to turn on the device and long press again to turn it off.
- Photo button: Short tap to enter photo mode. Press to take one photo at a time.
- Video key: Short press to enter recording mode. Press to start recording. Short press again to stop recording.
- Motion detection: Long press in video mode to enable motion detection. Press to exit motion detection in the motion detection state.
- Night vision key: Short press to turn on or off the night vision mode.
- Recording key: Tap to enter recording mode. Tap to start recording. Tap again to stop recording.
- Flip key: Long press to enable or disable hot WiFi.
Indicator Description:
- Video indicator: Steady on video standby mode; fast blinking: motion detection standby mode; slow blinking: video recording; blinking for three times to shut down the device.
- Camera indicator: Blinks when taking a picture in standby mode.
- Recording indicator: Steady on recording standby mode; slow blinking: recording.
- Night vision indicator light: Steady on night vision mode is on; off: night vision mode is off.
- WiFi indicator light: Steady on WiFi is on; off: WiFi is off.
- Turn-over indicator: Steady on red light is on; off: red light is off.
- Charging indicator light: Steady on charging; off battery full.
Basic Operating Instructions:
- Power on: Press and hold the power key. If a TF card is inserted, the device will enter recording standby mode. After 8 seconds without a card, the device will automatically shut down.
- Shutdown: In any mode of powering on, long press the power key to turn off the device.
- Recording: In recording mode, briefly press the video key to start recording. Press the video key again to stop recording.
- Motion detection: In video recording mode, long press the motion detection key to enter motion detection video recording mode. If an object movement is detected, the device will start recording. Short press the motion detection key to exit motion detection video recording mode.
Product illustration
- Hd lens
- WiFi indicator light
- Turn-over indicator
- Video indicator
- Camera indicator
- Recording indicator
- Night vision indicator light
- Charging indicator light
- Flip key
- Recording key
- Night vision key
- Photo button
- Power key
- Charging interface
Mode of use
The lens of this product can be rotated 180°, and the Angle can be adjusted
according to requirements during use, as shown in the figure:
Installing a TF card
- Insert TF card as shown in figure
- Please use the original TF card
- Support 4-256G, C10 high-speed card
Use tutorial
Key description
**Indicator description
**
Basic operating instructions
-
Power on
Press and hold the “ ” key to power on. If there is a card, directly enter the recording standby mode, and the recording light is always on. After 8 seconds without a card, the video lamp will flash three times and automatically shut down. Standby with card without using any functions. The blue light flashes 3 times in 1 minute and then automatically shuts down(when the hotspot WiFi is turned on, it will not automatically shut down). -
Shutdown
In any mode of powering on, long press the “ ” key and the video lamp flashes three times before turning off. -
Recording
In recording mode, briefly press the ” ” key to indicate a slow flash to start recording, and in recording mode, briefly press the ” ” key to stop recording. -
Motion detection
In video recording mode, long press the” ” key to enter the motion detection video recording mode, and the indicator light flashes quickly. If an object’s movement is detected, the indicator light flashes slowly to start recording. If an object movement is detected, record for 1 minute at a time, and if a continuous object movement is detected, record for 5 minutes in segments. Short press the “ ” key to exit the motion detection video recording mode. -
Take a photo
In the photo mode, briefly press the” “key to flash the indicator light and take a photo. -
Recording
In recording mode, briefly press the “ ” key to indicate a slow flash to start recording, and in recording mode, briefly press the “ ” key to stop recording. -
Image Flipping
The default orientation of the image is the back clip direction. If you need to rotate the lens for shooting, please briefly press the “ ” key to adjust the image. The 180 ° indicator light is always on. -
Night vision
For video recording, photo taking, detection, and WiFi standby mode, short press the ” ” key to turn on night vision, and the night vision indicator light will be on; When turning on night vision, briefly press the ” ” key again to turn off the night vision indicator light and turn it off.
APP download and installation
Scan the QR code below to download and install “Sports Camera”, or search for
“Sports Camera” in Google Play or App Store to download and install.
Hotspot WiFi
WiFi switch
-
Turn on WiFi
Turn on WiFi without a card, long press ” ” but180° ton to turn on the WiFi indicator light within 8 seconds when the blue light is on; Turn on WiFi if there is a card, and long press “ ” but180° ton to turn on WiFi indicator light in standby mode of video recording and photo taking. -
Turn off WiFi
When WiFi is on, hold down the “ ” but180° ton to turn off the WiFi indicator.
WIFI connection
The WIFI setting of the mobile phone or tablet computer searches for networks
with a connection name of “CS started (listed as CS05_CE01)”. After the
connection is successful, open the Sports Camera App to enter the main
interface point ” ” to enter the real-time preview interface. In the preview
interface, you can also select video recording/photographing by using the
machine buttons. If you encounter other issues during operation, please click
the main interface to help view them.
Time setting
After the device connects to WiFi and enters the APP, it will automatically
synchronize the time. You can set the time watermark on or off in the APP.
Connect to a computer
In any mode, you can directly connect to the computer, and the computer will
pop up a removable disk identifier, which can be used as a USB disk for data
transmission, copy, paste, delete and format files.
Resetting
If the machine crashes and the key is invalid, it cannot be used normally.
Long press the power button for 10 seconds to reset the machine. After the
reset, it can be used normally.
Charging
The charging red light is on, and the full red light is on. Charging can be
pressed to enter any mode.
Suggestion : Try not to use the function while charging, it may cause battery and TF card damage!
Remarks
- After the battery is used up, it takes about 2 to 3 hours to recharge;
- Note : Charge the battery as much as possible for 20 minutes to ensure that the battery is fully saturated.
- Because this product is a high-definition recorder, the power consumption of the product is larger than that of Puqing. It is normal for the product to appear fever when it is used, not caused by the product itself. This product is shipped after strict testing, please rest assured to use.
Matters needing attention
Application
Please strictly abide by the relevant laws of the country where the product is
used Any illegal use, or else there will be consequences.
Operating temperature
Please use in natural temperatures, do not use if the human body can not adapt
to the temperature.
Working humidity
Please use it in the humidity suitable for the human environment. Do not put
the product in a humid environment. This product does not have the waterproof
function, so avoid drenching or exposure to rain.
Shooting requirements
Use the camera in an environment with sufficient light sources. Do not point the
camera directly at strong light sources such as the sun to avoid damage to
optical components. Such as a strong light source, so as to avoid damage to
optical devices.
Cleaning requirements
Do not use in an environment with too high dust density to avoid dust
contamination of the lens and other components, which may affect the camera
effect. (In case of fingerprints or dust on the lens, please use a clean soft
material dust-free cloth to wipe).
Correlation parameter
Documents / Resources
|
HONGHOO BD-C6 Pocket
Camcorder
[pdf] Instruction Manual
BD-C6 Pocket Camcorder, BD-C6, Pocket Camcorder, Camcorder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>