Qman 54001 Remote Control Supercar Instruction Manual
- June 6, 2024
- Qman
Table of Contents
**Qman 54001 Remote Control Supercar
**
**Product Summary
**
**Smart creative module
**
**Remote Control
**
Method Of Operation
On/Off
Tum on the power switch and indicator lights when staring
NOTE
Please tum off the power and use it outside.IT is forbidden to work for a long
time. It will stop when the working state is longer than 24 hours, Second. you
need to charge the Smart creative module
Remote Control Operation
Use a Phillips screwdriver to unscrew the screw on the battery cover at the
back of the remote control counterclockwise. open the battery cover, load 2 1.
SV “AAA” batteries with correct polarity, dose the battery cover, and lighten
the screws.
After installation, the indicator light flashes and lights up when the link j5
5Ucce55ful.
NOTE
If the power is not turned on for a long time .repeal the installation of the
remote battery connection
Charging Operation
Use USB charging .connect the main Smart creative module and the computer USB
port When charging, the light i5 on and the light i5 off. The charging time is
120 minutes
NOTE
The charing input voltage should not exceed 5V and the current 5hould not
exceed 2A.
- Precautions Smart creative module is not removable and must not subject the product to mechanical shock;
- The smart creative module contains batteries, away from heat sources and locations above 60C;
- The smart creative module cannot be charged for a long lime to avoid danger;
- The USB charging cable is an electronic component and cannot be used for play;
- This product C011tains small part’.l and is prohibited for use by children under the age of three to avoid the risk of suffocation
- The charging cable should be checked periodically for damage to its wires, plugs, housing, and other components. If any damage is found, it should be stopped using it until it’s repaired
- The remote control function keys vary with the product series
**ASSEMBLING
**
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>