DOOYA 1554ev00 Connector Mini Bridge User Manual
- June 16, 2024
- Dooya
Table of Contents
DOOYA 1554ev00 Connector Mini Bridge
IMPORTANT INFORMATION
Mini Bridge allows user to link their motorized shutters, blinds, and curtains into Wi-Fi network, enabling control via smart APP and interaction with other IoT products.
Step 1 Download APP
Please scan below QR code.
Step 2
Please scan below QR code to learn more about link up Mini Bridge with home
Wi-Fi router, setup Connector APP, and establish connection with other IoT
applications.
Program I Pairing:
Press and hold program button for about 2 seconds, then release until the LED
blinks purple.
Reset:
Press and hold program button for about 1 O seconds, then release until the
LED blinks red.
Product Parameter
Indoor use only Wi-Fi : 2.4GHz (802.11 b/g/n)
Power Input: DC 5V/1A (USB Type-A)
Radio frequency: 433.92MHz
Working temperature: 0°c – 40 °C
Dimension(mm) : L83.8 W30. 7 H13.9
Status Indicator
Color | Meaning | Duration |
---|---|---|
Constant Blue | Working fine | Constant |
Slow Flashing Red | Wi-Fi is disconnected | Continuously till status change |
Slow Flashing Yellow | Wi-Fi is connected | Continuously till status change |
Quick Flashing Red | Bridge reset | 5times |
Slow Flashing Purple | Pairing underway | Continuously till status change |
Slow Flashing Green | Upgrade in progress | Continuously till status change |
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
This equipment meets the exemption from the routine evaluation limits in
section 2.5 of RSS-102. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>