Linktop IOT LT-TWL Leather Cord Lamp Remote Control User Guide
- June 16, 2024
- Linktop IOT
Table of Contents
LT-TWL Leather Cord Lamp Remote Control
User Guide
Color Selection
Play Preset Effects Customize Music Mode
Timer
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. lf this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be
at least 20 cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its
antenna(s).
Dimensions
a| 6cm/2.36″
b| 600cm/236.2″
c| 785cm/309″
Model：LT-TWL
Color: RGB 16 million colors
Connectivity Protocol: Bluetooth
Working Voltage: 5V/2A
Operating Temperature: -5~45°C
Life Span: About 20,000 hours
Controller
- Press – On / Switch Effects (8 regular effects + 2 music modes)
- Press and hold for 2 seconds – Loop all 25 effects
- Press and hold for 5 seconds – Off
- Press and hold 10 seconds for twice – Restore factory settings
App Download
Please scan the QR code to download
the ‘LED SMART’ App.
https://apps.apple.com/app/led-
smart/id1290019246
https://play.google.com/store/apps/details?id=com.ledsmart
*This application requires iOS 10.0 or later / Android 4.4 or later.
- Download and install the “LED SMART” App.
- Go to ‘Settings’ of your mobile device and turn on BT.
- App automatically searches and lists all available devices nearby. Select your device to connect, then you can fully control lights.
-
If you are using an Android mobile device, please make sure you have enabled precise location access and nearby devices permission for our App.
-
Generally, 1 mobile device can group up to 5 devices together and control them simultaneously. This may vary from different phones.
* The user interfaces provided above are for reference only, and might be different from the latest version of the App.
Grouping- Turn on multiple devices, keep the devices connected with the App and click the ‘Group’ button
- Select the devices you wish to be grouped, click ‘Add Device’, and name the group to complete grouping
- If you need to delete a group, just long-press the group to delete it.
FQA
1. The device cannot be connected?
(1) Check whether the equipment is normally powered; (2) Whether the Bluetooth of the mobile phone is turned on; (3) Whether there are other mobile phones already connected, please disconnect if they are connected, Bluetooth 4.0 only supports one-to-many, and does not support many-to-many control; (4) If you still can' t connect under normal operation, exit the APP and then reopen it; (5) Exit the APP, then restart the phone, power on the device again, reopen the APP software and connect again.
2. Why doesn' t the timing work normally?
Customer Support:
For any problem with the product, please feel free to contact us
via Amazon Message, we will reply and resolve your problem in
24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>