Eastern ET-8619A Wireless Mechanical Gaming Keyboard

PACKINC LIST

INSTRUCTIONS

2.4Ci Mode

1. Set the switch at the bottom of the keyboard to 2.4G
2. Take out USB receiver of keyboard’s back and plug it into computer. You can use the keyboard after the computer installs its driver automatically.

BTl Mode

1. Set the switch at the bottom of the keyboard to BT
2. Press FN+l button. then the keyboard switches to BTl mode
3. Long press FN+l button for 3 seconds. the keyboard enters pairing state
4. Turn on the Bluetooth on your computer. Select “BT3.0 Keyboard” to connect if your computer runs Win 7 or a version below this. Select “BT5.0 KB” to connect If your computer runs Win 8 or a version above this. or iOS and MacOS. You can use the keyboard after successful connection.

BT2/BT3 Mode

Please refer to the instructions in BTl Mode

Wired Mode

1. Connect keyboard to the computer with the included data cable
2. Set the switch at the bottom of the keyboard to OFF. then you can use wired connection.

PRODUCT FEATURES

1. Multi-mode Switch : This keyboard has 5 connection modes (Wired/2.4G/8Tl/BT2/BT3) which can be used to connect and control 5 devices. You can switch different mode to control the corresponded device.
2. Win Lock Key : You can turn on or off the function of win key by pressing FN+WIN keys.
3. Rechargeable Design : Built-in a large-capacity lithium battery, this keyboard can be charged via the included charging cable. When its battery is running low. the mode light flashes red for reminding. please charge it in time.
4. RGB Backlight : The keyboard has 20 lighting modes. which can be switched in cycles by pressing FN+N keys.
5.   Factory Reset : Press and hold FN+”ESC” for 3 seconds to reset the keyboard to factory settings.
6. Programming Function: Support customized buttons setting and lighting effects via the programming software, which can be installed from https// gamingffe.com/pages/download.

COMBINED-KEV FUNCTION

Calculator

| ****

Player

| Previous Track| Next Track
FN+F7| FN+FB| FN+F9| FN+FlO| FN+Fll| FN+Fl2

Play/Pause

| ****

Stop

| ****

Mute

| Volume Down| Volume Up| ****

Email

FN+ (| FN+]| FN+;| FN+”| FN+ >| FN+/
Ins| Del| Home| End| Pg Up| PgDN

BACKLICHT-EFFECT CONTROL

FN+

| Speed Up Backlight
FN+| Speed Down Backlight
FN+M| Switch Backlight Color
FN+PrtSc| Turn Lights On/Off

SOLUTIONS FOR ABNORMAL  CONNECTION IN 2.4C MODE

1. Set the switch at the bottom of the keyboard to 2.4G
2. Hold press FN+ 4 for more than 3 seconds
3. Plug the receiver into the computer. and then you  can use the keyboard normally.

SOLUTIONS FOR ABNORMAL CONNECTION IN en MODE

1. Delete the Bluetooth list on your computer.
2. Set the switch at the bottom of the keyboard to BT.
3. Long press the FN+l button for 3s, the keyboard enters pairing.
4. Turn on the Bluetooth on your computer. Select “BT3.0 Keyboard” to connect if your computer runs Win 7 or a version below this. Select “BT5.0 KB” to connect If your computer runs Win 8 or a version above this, or iOS and MacOS. You can use the keyboard after successful connection.

SOLUTIONS FOR ABNORMAL CONNECTION IN BT2/BT3 MODE:

Please refer to BTl-mode solutions.

Note : If the product is still unvvorkable after above solutions, please repeat these steps for code pairing again. If your problems can’t get solved yet after that. please contact our customer service for help.
(Email : csforcustomer@gmail.com)

• CORRECT DISPOSAL OF THIS PRODUCT This Marking shown on the product or its literature. indicate that it should not be disposed with other household wastes at the – end of its vvorking life.
• To prevent possible harm to the environment or  human health from uncontrolled waste disposal.please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product. or their local government office, for details of where and how they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check the terms and conditions of the purchase contact. This  product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1 J This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement :

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

• This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful  interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• * Reorient or relocate the receiving antenna.

  • ncrease the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radiofTV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>