Eastern ET-8714A Wireless Mechanical Gaming Keyboard User Manual

ET-8714A Wireless Mechanical
Gaming Keyboard
User Manual

ET-8714A Wireless Mechanical Gaming Keyboard

WIRELESS MECHANICAL GAMING KEYBOARD

PACKING LIST

1. Keyboard x1
2. USB Receiver x 1
3. User Manual x1
4. Data Cable x1
5. Key puller «1

INSTRUCTIONS

246 MODE

1. Set the switch at the bottom of the keyboard to 2.4.
2. Take out USB receiver of keyboard’s back and plug it into computer. You can use the keyboard after the computer installs its driver automatically.

BTI MODE

1. Set the switch at the bottom of the keyboard to BT
2. Press FN-Q button. then the keyboard switches to BT1 mode.
3. Long press FN+Q button for 3 seconds, the keyboard enters pairing state.
4. Turn on the Bluetooth on your computer. Select “BT3.0 Keyboard” to connect if your computer runs Win 7 of a version below this. Select “BT5.0 KB’ to connect If your computer runs Win 8 or a version above this, or 1OS and  MacOS. You can use the keyboard after successful connection.

BT2/BT3 MODE

Please refer to the instructions in BT] Mode.

WIRED MODE

1. Connect keyboard to the computer with the included data cable
2. Set the switch at the bottom of the keyboard to OFF. then you can use wired connection

PRODUCT FEATURES

1. Mull+mode Swatch: This keyboard has 5 connection modes (wired/2,4G/BT1/BT2/BT3) which can be used lo connect and control S devices. You can switch different mode to control the  corresponded device.
2. Win Lock Key: You can turn on or off the function of win key by pressing FN+WIN keys.
3. Rechargeable Design: Built-in a large-capacity lithium battery, this keyboard can be charged via the included charging cable. When its battery is running low. the mode light flashes red for reminding. please charge it in time RGB  Backlight: The keyboard has 20 lighting modes. which can be switched in cycles by pressing FN+ins keys
4. Factory Reset: Press and hold FN+ ESC” for 3 seconds to reset the keyboard to factory settings.
5. Programming function: The keyboard can use the programming software to customize the key functions and lighting effects. The programming software can be downloaded via https://gamingffe.com/pages/download.
6. Custom Lighting: Press FN! 1~5 keys to enter 5 custom lighting modes. When the keyboard is in custom mode, press FN |! Home to start to customize the light. and keep pressing each button to set the light to your favorite color.  After the customization is complete, press FN – Home again to save the light settings.

COMBINED-KEY FUNCTION

BACKLIGHT-EFFECT CONTROL

SOLUTIONS FOR ABNORMAL CONNECTION IN 2.4C MODE

1. Set the switch at the bottom of the keyboard to 2.4G
2. Hold press IN R for more than 3 seconds
3. Plug the receiver into the computer, and then you can use the keyboard normally.

SOLUTIONS FOR ABNORMAL CONNECTION IN Aril MODE

1. Delete the Bluetooth list on your computer.
2. Set the switch at the bottom of the keyboard to BT.
3. Long press the FN-i-Q button for 3s. the keyboard enters pairing.
4. Turn on the Bluetooth on your computer. Select “BT3.0 Keyboard” to connect if your computer runs Win 7 or a version below this. Select “BT5.0 KB” to connect If your computer runs Win 8 or a version above this, or iOS and MacOS. You can use the keyboard after successful connection.

SOLUTIONS FOR ABNORMAL CONNECTION IN BT2/BT3 MODE: PLEASE REFER TO 811-MODE SOLUTIONS.
Note: If the product is still unworkable after above solutions. please repeat these steps for code pairing again. If your problems can’t get solved yet after that, please contact our customer service for help.
(Email: [email protected])

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device has been tested and found to comply with the fomites for a Class B digital device. pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee  that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct  the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• increase the separation between the device and receiver,
• Connect the device into an outlet on a circuit different from that to which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>