FORWARD INDUSTRIES KBBM1116 Smart Side Table Instruction Manual

FORWARD INDUSTRIES KBBM1116 Smart Side Table

Safety and Care Advice

1. The maximum weight that can be placed on this product is 33 LBS.
2. This product must not be used as a seat.
3. Always use the original AC power adapter and power cable, otherwise, it may cause slow wireless charging, poor bluetooth speaker function. In extreme cases, an incompatible AC power adapter may burn out.

Specifications

1. 2.0 CH Bluetooth Table speaker
2. Bluetooth version: 4.2
3. Bluetooth transmit distance: Up to 32.8 feet
4. Bluetooth frequency: 2.402-2.480GHz
5. Drive units: 3″ 4Ω 12W x 2pcs
6. RMS: 20W (10W*2)
7. Working voltage: DC 12V–2A
8. Wireless Charging: 5W (5V-1A)

Function

• Bluetooth
• Hands-free
• Wireless charger function
• TWS function ( true wireless stereo )

Main Components

Accessories

Assembly Steps

1. Place main body 1 upside down on to a clean fat surface.
   Note: Ensure the surface is suitably protected to prevent any scratches or damage to the main body 1.
   Screw legs 2 into position on the underside of main body 1.
   Note: Two different legs length options are supplied.

2. With help, carefully turn the side table over into the standing position.

3. Plug power adapter A into the ‘DC IN’ port on the back of main body 1. Plug the adapter into an electric socket for main power.

Controls / Functions

1. POWER / TWS
2. PLAY / PAUSE / PHONE
3. VOLUME –
4. VOLUME +
5. MIC
6. BLUETOOTH MODE LED INDICATOR
7. TWS MODE-LED INDICATOR
8. DC IN
9. WIRELESS CHARGING SYMBOL

Power On / Off

1. Connect the power adapter with the DC IN port (please make sure you use the original adapter supplied). You will hear “Power on” from the speaker. The speaker will automatically enter Bluetooth mode as default, and you will hear “Bluetooth, waiting for connection”.
2. Press and hold the POWER button to turn the unit off. You will hear “Power off”.
3. Press and hold the POWER button to turn the unit back on.

Bluetooth Connection and Play

1. With the power on and the unit in Bluetooth mode, it will automatically switch to pairing state. The blue LED light will flash slowly. The Bluetooth device name is ‘KBBM Side Table’.
2. A phone or other device can now be paired with the unit.
3. You will hear “Bluetooth is Connected” after pairing. The blue LED light will become constant. If pairing fails, the blue LED light will flash quickly.
4. During music playback, the music can be paused by short pressing the FORWARD button. It will play again after a further short press of the FORWARD button.
5. When this unit is connected to a smartphone, press and hold the FORWARD button to switch off the Bluetooth connection. You will hear “Bluetooth disconnected, waiting for connection”.
6. Another device can be connected by repeating paring with Ralph. It is not possible to have two devices connected simultaneously.
7. The best distance between smartphone and speaker is ≤ 32.8 feet.

Volume control

1. Press the【➕】button to increase the volume. The speaker will automatically default to mid-volume when switched on. You will hear the voice prompt“ Maximum volume”when volume is max. Meanwhile, please increase the volume of the phone to maximum.
2. Press the 【➖】button to decrease the volume.

Phone calls when connected

1. If you receive a call whilst your Phone is connected via Bluetooth, the speaker will sound your ring tone. Short press the FORWARD button to answer the phone and speak to the MIC. Short press the FORWARD button again to hang up, or long-press to decline the call.
2. Double press the FORWARD button to redial the phone number of the last call.

Wireless Charging

1. If you have a mobile device with wireless charging capability, it can be charged by placing it on the wireless charging symbol on the top of the unit.
2. Make sure that the smartphone is within the charging area. Once charging begins, the charging signal will be shown on the phone screen. You can remove your smartphone form the charging area at any time to end the charging process.
3. The wireless charger will charge compatible mobile devices even when the unit is turned off, providing the AC adapter is connected, to a mains power source that is switched on.
4. Some phone cases may inhibit the wireless charging function. It may be necessary to remove the phone cases to improve wireless charging efficiency.

TWS Function

1. If you have two side tables, you can listen to music in TWS mode via Bluetooth. Turn on both tables. Double click the  POWER button of one speaker. The speaker will enter TWS paring mode. Your will hear an acoustic signal and the orange LED indicator flash rapidly. After TWS pairing, the orange LED of main speaker will become constant, and the LED of sub-speaker will flash slowly.
2. To switch off TWS pairing, press the POWER button of one speaker.

Automatic Power Off

The speaker will automatically turn off, if none of it’s functions are used after 10 minutes.

Disposal

If disposal of this product becomes necessary, please do this in an environmentally responsible way. Contact your local government office or authority for suitable disposal or recycling options in your local area. Do not dispose of this product, or it’s components, with your general domestic waste.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

After Sales Support /Product Returns

If you have questions regarding the operation of your koble purchase, or in the unlikely event you need to return the unit because it is faulty or is no longer wanted, please contact our product returns department at [email protected],or service number: 561-465-0030, Option 0. Address: Forward Industries, 105. South Narcissus Avenue Suite 412, West Palm Beach, FL 33401

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>