NOKLEAD H68 Bluetooth Label Maker Machine User Guide

June 16, 2024
NOKLEAD

Quick Start Guide

H68 Bluetooth Label Maker Machine

  1.  Charge the device
    Please charge the device before turning on it.

  2. Open the lid

  3.  Label loading

  4.  Turn on

  5.  Set a calibration mode
    Don’t miss this step!!!
    One-click the button, it will slowly analyses the label, or it align the label incorrectly.

  6. APP download
    Search FlashMini in Google Play or APP Store.

  7. Bluetooth connection
    Open FlashMini APP to turn on the Bluetooth, NOT in system settings.

in “FlashMini” APP

● Click “ ” or “My Device” to search the device.

  1.  Select label paper

  2. Edit
    Click on 【Text 】, 【Double click 】pops up, then edit labels in the entry bar.

  3. Cut paper

Frequently Asked Questions

What's the specifications of label tape compatible with B1 label maker?

Label tape diameter: 1.6 inch (both continuous and non continuous) The gap between the label tape: 0.3 inch (non continuous) Make sure the diameter of the label tape is less than 1.6 inches, or it can't fit inside the B1 label maker. And check if the gap between the label tape is between 0.24-0.3 inch, or it can't align the labels to print correctly.

Why cannot the machine be searched by the APP?

Why does the machine work normally but keep printing blank paper?

It may be because the label paper is laid reversely, please make the label sticker face up. Improperly load the paper without leaving 1-3mm outside the slot port. Residues is sticking on the cutter or feed slot and the label paper fails to be detected. Please clean the dust or residues with an alcohol cotton pad.

Why does the APP get frozen?

This always happens when you use it for the first time. Please long-press the button to shut down the machine and reactivate it. It will get normal after restarting.

Why the label maker doesn’t print at all or only print half the word?

Using the WRONG LABEL TYPE will cause unsatisfied printing results, please check your label type. Improperly load the paper without leaving 1-3mm outside the slot port. Please check if the label exceeds label width range. Off Brand label paper will not work. Font size exceeds perimeters range. Please configure whatever you want within the label template perimeters.

Why it can't print any of the colored labels or cute characters, just the words or icons?

All the label makers on the market apply thermal printing technology and uses chemically-treated paper that darkens when heated by a thermal print head. Thus, it ONLY SUPPORTS BLACK PRINTING. Color options are the labels themselves. The colored labels are just for reference only.

Why cannot the label maker be fully charged when being plugged into the laptop, causing automatic shutdown after unplugging?

The output voltage of the laptop USB interface is insufficient and unstable, which is unable to provide a stable charging environment. Please use a wall socket for charging.

What’s the PIN code for Bluetooth connection?

PIN code is 0000.

Product Overview

Indicator Light Instructions

Label Maker Status Status Action
Lights up in green Normal Standby Mode
Lights up in blue Bluetooth connected Printing in progress
Lights up in red Charging Cover is open
Out of paper Improperly load paper

Close the cover
– Refill label tape
Make the label face up and leave1-3mm of label outside the slot port
Flashes slowly in red| Low battery| Charge the machine

Customer Service Contact Information

We want you to love your purchase, but if you are not completely satisfied, please contact our Customer Service team with any questions you may have.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals