NOKLEAD 1224 Hygrometer Indoor Thermometer User Guide
- June 14, 2024
- NOKLEAD
Table of Contents
1224 Hygrometer
Indoor Thermometer
Overview
Back of Machine
Chapter 1 Date and Time Setting
- Press and hold the [ SET ] button to enter the DATE setting, the Year “2022” begins to flash, press the [ + ] or [ – ] to set the Year.
- Press the [ SET ] button again, the Month “1” begin to flash, press the [ + ] or [ – ] button to adjust.
- Press the [ SET ] button again, the Day “1” begins to flash, press the [ + ] or [ – ] button to adjust.→Go on
- press the [ SET ] button again, enter Time Setting, the Hour number “12” starts to flash, press the [ ] or [ ] button to adjust the Hour.
- Press the [ SET ] button again, the Minute digit “00” starts to flash, press the [ ] or [ ] button to adjust.
- Press[ SET ] button to save Date and Time setting.
No operation 15S automatically can also save.
Chapter 2 12/24 Hr Change
Under normal using, Press the [ – ] button to switch 12/24H time format.
Note: When the 12H time format is selected, the “AM” or“ PM” will display on
the screen.
Chapter 3 **℉/℃ Switch
**
Under normal using, Press the [ + ] button to switch temperature unit to °C/°F
Chapter 4 Calibration Adjustment
- To access calibration mode,press the [ + ] and [ – ] buttons and hold together until the temperature number begins to flash, release the both button and just press the [ + ] or [ – ] button to adjust the temperature.
- Press the [ SET ] button until the humidity number begins to flash, release the button and press the [ +] or [ – ] button to adjust the humidity.
- Press the [ SET ] button to save your adjustments.Or NO OPERATION after 15 seconds , the display will be saved automatically.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>