ErgoFocus Z214 Monitor Riser User Guide
- June 16, 2024
- ErgoFocus
Table of Contents
ErgoFocus Z214 Monitor
Monitor Riser User Guide
Specifications
- Product Version: V1.0
- Age Restriction: Not for children under 3 years old. Adult supervision is required.
Package Contents
- A (x1) Storage Board
- B (x2) Side Board
- C (x2) Middle Support Board
- D (x1) Desktop
- E (x1) Bottom Support Board
- F (x14) Bolt
- G (x14) Eccentric Nut
- H (x4) Lag Screws
- I (x6) Soft Pad
Assembly Steps
Step 1
Tools Required:
- F Screw bolts to the end.
- B
- G Arrow must point toward the hole, then turn clockwise to tighten.
Step 2
Tools Required:
- F Screw bolts to the end.
- D
- G Arrow must point toward the hole, then turn clockwise to tighten.
Step 3
Tools Required:
- A
- B
- D
- H Screw Lag Screws to the end.
- F Screw bolts to the end.
- G Arrow must point toward the hole, then turn clockwise to
tighten.
Step 4
Tools Required:
- E
- A
- G Arrow must point toward the hole, then turn clockwise to
tighten.
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, or play on the monitor riser.
- This product is intended for indoor use only. Otherwise, it may lead to product failure.
- Do not exceed weight capacity. We cannot be liable for damage or injury caused by incorrect assembly or inappropriate use.
- This product contains small items that could be a choking hazard if swallowed.
NOT FOR CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1
- Insert the Bolt (F) into the Side Board (B), and tighten the Bolt (F) with a screwdriver.
- Attach the Side Board (B) to the Storage Board (A). Insert Eccentric Nut (G) to the Storage Board (A), and tighten Eccentric Nut (G).
STEP 2
- Insert the Bolt (F) into the Desktop (D), and tighten the Bolt (F) with a screwdriver.
- Attach the Middle Support Board (C) to the Desktop (D). Insert the Eccentric Nut (G) into the Middle Support Board (C), and tighten Eccentric Nut (G).
STEP 3
- Attach Side Board (B) with Storage Board (A) to the Desktop (D). Insert Eccentric Nut (G) to the Side Board (B), and tighten Eccentric Nut (G).
- Insert the Bolt (F) and Lag Screws (H) to the Storage Board (A), and tighten the Bolt (F) and the Lag Screws (H) with a screwdriver.
STEP 4
- Attach the Bottom Support Board (E) to the Storage Board (A). Insert the Eccentric Nut (G) into the Bottom Support Board (E), and tighten the Eccentric Nut (G).
FAQ
1. Can this monitor riser be used by children?
No, this monitor riser is not suitable for children under 3 years old. Adult supervision is required.
2. Are the tools required for assembly included in the package?
No, the tools required for assembly, such as a screwdriver, are not included in the package. Please make sure you have the necessary tools before starting the assembly process.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>