CORNING SOC-MTP-3P-OM1 FuseLite Connector User Manual
- June 16, 2024
- Corning
Table of Contents
CORNING SOC-MTP-3P-OM1 FuseLite Connector
Product Information
Specifications
- Part Number: SOC-MTP-3P-OM1
- Available Options: Single-mode and Multimode
Features and Benefits
- Factory-polished end face for consistent optical performance
- Fusion splice connectivity, ideal for reflectance-sensitive applications
- Splice protection within connector body, eliminating the need for splice trays
- Available in ribbon and 3 mm cable options, ideal for cable trunk restoration and repair
Product Usage Instructions
General Instructions
- Ensure that the product is compatible with your fusion splicer.
- Clean the connector end face before use.
- Make sure the connector housing is securely attached to the cable.
- Follow the specific instructions provided by your fusion splicer manufacturer for fusion splicing.
Connector Installation
- Select the appropriate connector type based on your application requirements.
- Identify the housing color and boot color of the connector for easy identification.
- Gently insert the connector into the mating port until it clicks into place.
- Verify that the connector is securely connected.
Maintenance and Care
- Avoid excessive bending or twisting of the cable to prevent damage.
- Regularly inspect the connector for any signs of damage or wear.
- Clean the connector end face using a lint-free cleaning cloth and approved cleaning solution.
- Store the connectors in a clean and dry environment when not in use.
Environmental Conditions
Temperature Range, Operation: Refer to the
product specifications for the recommended temperature range.
Product Specifications
Design – Connector| Connector Type| Housing Color| Boot Color| Ferrule
Material
---|---|---|---|---
…| …| …| …| …
Optical Specifications – Connector| Polish Reflectance| Insertion Loss,
Typical
---|---|---
…| …| …
Frequently Asked Questions
Q: What is the part number of the product?
A: The part number is SOC-MTP-3P-OM1.
Q: What are the available options for this product?
A: The product is available in both single-mode and multimode
options.
Q: Are splice trays required for this connector?
A: No, the FuseLiteTM Connector does not require splice trays as
it has splice protection within the connector body.
Q: What is the typical insertion loss of the connector?
A: The typical insertion loss is 0.15 dB..
FuseLite® Connector, MTP® compatible, 3.0 mm Round Cable Pinned, 62.5 µm multimode (OM1)
Part Number:
SOC-MTP-3P-OM1
- The FuseLite™ MTP® Compatible Splice-On Connector enables fast, reliable fusion splicing repair, restoration or connectivity for data center cabling systems, or other applications where MTP (also known as MPO) connectivity is required.
- As part of EDGE™ and EDGE8® solutions for data centers, the FuseLite™ MTP® compatible connector pairs with EDGE modules and hardware for high-density data center connectivity without pre-engineered trunk lengths –ideal for applications where final trunk length decisions must be made on-site. The FuseLite MTP connector is also ideal for emergency repair and restoration of data center cable trunks and other MTP connector-based connectivity.
- Available in single-mode and multimode, the FuseLite™ Connector eliminates the need for splice trays and is compatible with leading fusion splicers in the market.
- For more information about EDGE™ and EDGE8® solutions for the data center, including the EDGE SE solutions featuring the FuseLite™ MTP® compatible connector, visit www.corning.com/opcomm contact Corning Customer Care at 1-800-743-2675.
Features and Benefits
- Broad operating temperature range (-40°C to +75°C) Utility and flexibility
- Factory-polished end face Consistent optical performance
- Fusion splice connectivity Ideal for reflectance-sensitive applications
- Splice protection within connector body No splice trays required
- Available in ribbon and 3 mm cable options Ideal for cable trunk restoration and repair
FuseLite® Connector, MTP® compatible, 3.0 mm round cable, pinned, 62.5 μm multimode (OM1
Specifications
General Specifications
Fiber Category| 62.5 µm MM (OM1)
Product Type| Field-Installable Connectors
Compatibility| MTP® Compatible
Corning Logo| Yes
Keyed (security)| No
Technology| Fuse-On
Standards
RoHS| Free of hazardous substances according to RoHS 2011/65/EU
Approvals and Listings| IEC 61754-7 compliant
Design – Connector
Connector Type| MTP® (pinned)
Housing Color| Beige
Boot Color| Black
Ferrule Material| Composite
Optical Specifications – Connector
Polish| PC
Reflectance| < -30 dB
Insertion Loss, Typical| 0.15 dB
Ordering Information
Product Number| SOC-MTP-3P-OM1
Packaging| Individual Pack
Units per Delivery| 1/1
Corning Optical Communications LLC • 4200 Corning Place • Charlotte, NC •
28216 • United States
800-743-2675 • FAX:
828-325-5060 • International:
+1-828-901-5000 •
www.corning.com/opcomm
A complete listing of the trademarks of Corning Optical Communications is
available at
www.corning.com/opcomm/trademarks.
All other trademarks are the properties of their respective owners. Corning
Optical Communications is ISO 9001 certified. © 2023 Corning Optical
Communications. All rights reserved.
Product Specification SOC-MTP-3P-OM1_NAFTA_AEN
References
- Corning Optical Communications | Fiber Optic Connectivity Solutions | Corning
- Legal Notices | Corning.com
- Corning Optical Communications | Fiber Optic Connectivity Solutions | Corning
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>