Wireless-Tek WI-PS205 250m CCTV PoE Switch Installation Guide
- June 14, 2024
- Wireless-tek
Table of Contents
Wireless-Tek WI-PS205 250m CCTV PoE Switch
Package Contents
- Take WI-PS518G as an example
- 1 × WI-PS518G
- 1 × Power Cord
- 1 × Rack mount kit (only for WI-PS518G WI-PS526G)
- 1 × Wall mount kit (Only for WI-PS205 WI-PS210 WI-PS210G)
- 1 × Installation guide
Appearance Overview
- For WI-PS205
- Front panel
- Back panel
WI-PS205 DIP Switch Description
Default| The transmission distance of PoE port can be up to 100m with 100Mbps
VLAN| The PoE ports are isolated from each other but can only communicate with
uplink ports, which can effectively restrain the broadcast storm and improve
the performance of the network
Extend| The transmission distance of PoE port can be up to 250m, but the rate
is limited to10Mbps.
LED Indicators Description
P| Solid on: The device power on is normal Off: The device is power off or
failed
E| Solid on: Extend mode is enable Off: Extend mode is disable
V| Solid on: VLAN mode is enable Off: VLAN mode is disable
PoE| Solid on: PoE is working Off: PoE not working
Link| Blinking: The Data on TX/RX Solid on: The port link down
Note: PoE Watchdog -All PoE ports enable PoE watchdog function. which can detect and reboot the offline compliant PoE powered devices Opening and closing PoE watchdog function: Flip the Dip switch left and right quickly (from default mode to default mode), Check the Power LED light if it is blinking, the PoE watchdog was disable or enable successfully.
- For WI-PS210
Front panel
Back panel
WI-PS210 DIP Switch Description
Default| The transmission distance of PoE port can be up to 100m with 100Mbps
VLAN| The PoE ports are isolated from each other but can only communicate with
uplink ports,which can effectively restrain the broadcast storm and improve the
performance of the network
Extend| The transmission distance of PoE port can be up to 250m, but the rate
is limited to10Mbps.
LED Indicators Description
P| Solid on: The device power on is normal Off: The device is power off or
failed
E| Solid on: Extend mode is enable Off: Extend mode is disable
V| Solid on: VLAN mode is enable Off: VLAN mode is disable
PoE| Solid on: PoE is working Off: PoE not working
Link| Blinking: The Data on TX/RX Solid on: The port link down
Note: PoE Watchdog -All PoE ports enable PoE watchdog function. which can detect and reboot the offline compliant PoE powered devices Opening and closing PoE watchdog function: Flip the Dip switch left and right quickly (from default mode to default mode), Check the Power LED light if it is blinking, the PoE watchdog was disable or enable successfully
- For WI-PS210G
Front panel
Back panel
WI-PS210G DIP Switch Description
Default| The transmission distance of PoE port can be up to 100m with 100Mbps
VLAN| The PoE ports are isolated from each other but can only communicate with
uplink ports,which can effectively restrain the broadcast storm and improve the
performance of the network
Extend| The transmission distance of PoE port can be up to 250m, but the rate
is limited to10Mbps.
LED Indicators Description
P| Solid on: The device power on is normal Off: The device is power off or
failed
E| Solid on : Extend mode is enable Off: Extend mode is disable
V| Solid on: VLAN mode is enable Off: VLAN mode is disable
PoE| Solid Ban: PoE is working Off: PoE not working
Link| Blinking: The Data on TX/RX Solid on: The port link down
Giga|
- Blinking: The negotiate speed is 1000Mbps and data on TX/RX On: The negotiate speed is 1000Mbps and ports link up
- Off: The negotiate speed is 10/100Mbps, not 1000Mbps
Note: PoE Watchdog -All PoE ports enable PoE watchdog function. which can detect and reboot the offline compliant PoE powered devices Opening and closing PoE watchdog function: Flip the Dip switch left and right quickly (from default mode to default mode), Check the Power LED light if it is blinking, the PoE watchdog was disable or enable successfully.
- For WI-PS518G
- Front panel
- Back panel
WI-PS518G DIP Switch Description
Default| The transmission distance of PoE port can be up to 100m with 100Mbps
VLAN| The PoE ports are isolated from each other but can only communicate with
uplink ports,which can effectively restrain the broadcast storm and improve the
performance of the network
Extend| The transmission distance of PoE port can be up to 250m, but the rate
is limited to10Mbps.
LED Indicators Description
POWER| Solid on: The device power on is normal Off: The device is power off
or failed
E| Solid on: Extend mode is enable Off: Extend mode is disable
PoE| Solid on: PoE is working Off: PoE not working
Link| Blinking : The Data on TX/RX Solid on: The port link down
Giga|
- Blinking: The negotiate speed is 1000Mbps and data on TX/RX On: The negotiate speed is 1000Mbps and ports link up Off: The negotiate speed is 10/100Mbps, not 1000Mbps
Note: PoE Watchdog -All PoE ports enable PoE watchdog function. which can detect and reboot the offline compliant PoE powered devices Opening and closing PoE watchdog function: Flip the Dip switch left and right quickly (from default mode to default mode), Check the Power LED light if it is blinking, the PoE watchdog was disable or enable successfully.
- For WI-PS526G
- Front panel
- Back panel
WI-PS526G DIP Switch Description
Default| The transmission distance of PoE port can be up to 100m with 100Mbps
VLAN| The PoE ports are isolated from each other but can only communicate with
uplink ports,which can effectively restrain the broadcast storm and improve the
performance of the network
Extend| The transmission distance of PoE port can be up to 250m, but the rate
is limited to10Mbps.
LED Indicators Description
P| Solid on: The device power on is normal Off: The device is power off or
failed
E| Solid on: Extend mode is enable Off: Extend mode is disable
V| Solid on: VLAN mode is enable Off: VLAN mode is disable
PoE| Solid on: PoE is working Off: PoE not working
Link/Act| Blinking: The Data on TX/RX Solid on: The port link down
10/100M|
- Blinking: The negotiate speed is 100Mbps and data on TX/RX On: The negotiate speed is 100Mbps and ports link up
- Off: The negotiate speed is 10Mbps, not 100Mbps
Note: PoE Watchdog -All PoE ports enable PoE watchdog function. which can detect and reboot the offline compliant PoE powered devices Opening and closing PoE watchdog function: Flip the Dip switch left and right quickly (from default mode to default mode), Check the Power LED light if it is blinking, the PoE watchdog was disable or enable successfully.
Installation
- Wall-mount installation(WI-PS205 WI-PS210 WI-PS210G
- Rack Installation(WI-PS518G WI-PS526G)
Warranty Card
Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|
If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damaged, warranty card losing will disqualify the product from limited warranty.
- Technical Support
- Company Website ****
- Cloud Management
- Wireless-Tek Technology Limited
Address: Biaofan Technology Building 402, Bauman street, Baoan District,Shenzhen City, Guangdong, China Website:www.wireless- tek.com
Tel: 86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>