Wireless-tek WI-PCES306G Cloud Managed Easy Smart Gigabit PoE Switch Installation Guide
- June 11, 2024
- Wireless-tek
Table of Contents
Quick Installation Guide
Cloud Easy Smart PoE Switch
WI-PCES306G | WI-PCES310GF
www.wireless-tek.com
Package Contents
WI-PCES306G
WI-PCES310GF
Appearance Overview
For WI-PCES306G
Front panel
Back panel
LED indicator
| LED | Color | Function |
|---|---|---|
| PWR | Orange | Off: No Power supply. |
on: Indicates the Switch has power.
PoE| Orange| Off: No PoE powered device (PD) connected.
on: There is a PoE PD connected to be port, which supply power successfully.
Blink: Indicates port abnormal PoE supply.
LNK/ACT| Green| Off: The network is not connected
Steady on: A 10/100/1000Mbps network device is connected
Blinking: Data is being transferred
For WI-PCES310GF
Front panel
Back panel
LED indicator light
| LED | Color | Function |
|---|---|---|
| PWR | Green | Off: No Power supply. |
on: Indicates the switch has power.
SFP| Green| Off: No device is connected to the corresponding port.
on: Indicates the link through that port is successfully established at
10/100/1000Mbps.
Blink: Indicates that the Switch is actively sending or receiving data over
that port.
PoE| Orange| Off: No PoE powered device (PD) connected.
on: There is a PoE PD connected to be port, which supply power successfully.
Blink: Indicates port abnormal PoE supply.
LNK/ACT| Green| Off: The network is not connected.
Steady on: A 10/100/1000M network device is connected.
Blinking: Data is being transferred.
Installation
Desktop installation (WI-PCES306G)
• Wall mounted installation (WI-PCES306G)
Install the Switch by following the steps: Fix 2 screws on the wall to align
the 2 fixing holes on the Switch, as shown in the figure below, and hang the
Switch smoothly on the screws.
• Desktop installation (WI-PCES310GF)
• Rack mounted (WI-PCES310GF)
Configuration
First, the device is powered on, the internet is connected to the WAN port of the gateway, the other LAN port of the gateway is connected to the Cloud Easy Smart PoE Switch, and then the PC is connected to the switch. Make sure the PC and gateway are on the same subnet.
Log in to the switch locally
Let the Switch obtain an IP address and then check the DHCP server to see
which IP address was assigned.
The Switch is set to DHCP by default, so it will try to automatically obtain
an IP address. If that fails, then it will use the default fallback IP
address, 192.168.0.1
To log in, follow these steps:
- Launch your web browser. Type the appropriate IP address in the address field.
- The login screen will appear. Enter admin in the Username and Password fields. Login in
Cloud login switch configuration
-
Log in to the cloud management interface
(No account, you need to register an account to log in The URL is http://cloud2.wireless-tek.com.
-
Enter the cloud binding switch (explain: The switch must be connected to the Internet to bind successfully)
Please enter the device serial number to bind a device to the current group,
device can be off when binding.
Explanation: The 17-digit SN code of the switch is shown on the sticker on the
back of the switch as shown in the figure below.
3. After binding, you can use the Switch in the Tunnel option in the cloud management, and then choose to use EWEBor TELNET to enter the switch. The default account is admin and the password is admin. (After entering the switch, you can configure it based on your own needs)
Warranty Card
Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|
- If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.
| http://support.wireless-tek.com/
---|---
| http://cloud2.wireless-tek.com
| http://www.wireless-tek.com/
| https://play.google.com/store/apps/details?id=com.witek.cloud
| https://apps.apple.com/de/app/wi-tek-cloud/id1639462947?l=en
Wireless-Tec Technology Limited
Address: Ibofanga Technology Building 402, Bauman street,
Baan District, Shenzhen City, Guangdong, China
Website: www.wireless-tek.com
Tel:86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com