Colorfarm ‎MK-FS60 Nano Ionic Hot Mist Face Steamer User Manual

Colorfarm ‎MK-FS60 Nano Ionic Hot Mist Face Steamer

Introduction

The Colorfarm MK-FS60 Nano Ionic Hot Mist Face Steamer is a cutting-edge skincare device designed to rejuvenate and hydrate your skin through the power of nano-ionic steam. This portable and compact facial steamer produces ultra- fine mist particles to open up your pores, promote better absorption of skincare products, and enhance your overall skincare routine. This comprehensive guide provides information on the specifications, key features, usage instructions, safety precautions, maintenance guidelines, and troubleshooting tips for the Colorfarm MK-FS60 Nano Ionic Hot Mist Face Steamer.

Specifications

• Model: Colorfarm MK-FS60 Nano Ionic Hot Mist Face Steamer
• Water Capacity: 25ML large capacity water tank
• Mist Type: Nano-ionic mist
• Dimensions: ‎ 14.09 x 10.39 x 5.16 inches; 1.85 Pounds
• Weight: 1.85 pounds

What’s in the Box

• Facial steamer unit
• Water tank
• User manual and instruction guide

Key Features

1. Nano-Ionic Technology: This facial steamer utilizes nano-ionic steam particles to deeply penetrate the skin, opening pores for thorough cleansing and better absorption of skincare products.
2. Portable Design: Its compact and lightweight design makes it ideal for both home and travel use, allowing you to enjoy spa-quality skincare anywhere.
3. Adjustable Steam Control: Customize the mist intensity to suit your skincare needs and preferences, ensuring a comfortable and effective treatment.
4. Quick Heating: The steamer rapidly heats water to produce steam, delivering quick and efficient skincare sessions.
5. Automatic Shut-off: The device features an automatic shut-off function for safety and convenience, turning off after a preset time to prevent overuse.

How to Use

Follow these steps for the safe and effective use of the Colorfarm MK-FS60 Nano Ionic Hot Mist Face Steamer:

Filling with Water:

• Remove the water tank from the device.
• Fill the water tank with distilled or purified water, ensuring not to overfill.
• Reattach the water tank securely to the device.

Power On:

• Plug in the device and turn it on using the power button.
• The device will start heating and generating nano-ionic mist.

Adjust Mist Intensity:

• Use the mist control knob to adjust the intensity of the mist. Start with a lower setting and increase it as needed.

Face Steaming:

• Position your face approximately 6-8 inches away from the mist nozzle.
• Close your eyes and mouth and enjoy the rejuvenating mist for about 10-15 minutes.

Post-Use:

• Turn off the device using the power button.
• Allow any remaining water to cool before emptying the water tank.
• Clean the water tank and nozzle as part of the maintenance routine.
• Store the device in a cool, dry place.

Safety Precautions

• Always follow the user manual and safety instructions provided.
• Use only distilled or purified water in the water tank to prevent mineral buildup.
• Keep the facial steamer out of reach of children and pets.
• Do not immerse the device in water or any liquid.
• Avoid using the device on broken, irritated, or sunburned skin.
• If you experience any skin irritation or discomfort during or after use, discontinue use immediately.

Maintenance

Proper maintenance ensures the longevity and effectiveness of your Colorfarm MK-FS60 Nano Ionic Hot Mist Face Steamer:

Cleaning the Water Tank:

• After each use, empty any remaining water from the water tank.
• Rinse the water tank with warm water to remove any residual minerals or impurities.
• Allow the water tank to air dry completely before reassembly.

Cleaning the Nozzle:

• Regularly clean the nozzle to remove any residue or impurities.
• Use a soft brush or cotton swab dipped in warm water to clean the nozzle thoroughly.
• Allow the nozzle to dry before using it again.

Exterior Cleaning:

• Wipe down the exterior of the facial steamer with a damp cloth or sponge after each use to remove any moisture or residue.
• Ensure that no water or moisture enters the electrical components of the device.

Storage:

• Store your facial steamer in a cool, dry place when not in use.
• Ensure that the device is completely dry before storing it to prevent mold or mildew growth.

Troubleshooting

Issue: The facial steamer is not producing steam.

Solution:

1. Ensure that the water tank is filled with distilled or purified water to the appropriate level.
2. Make sure the water tank is securely attached to the device.
3. Check the power source and confirm that the device is plugged in and turned on.
4. Wait for a few minutes after turning on the device to allow it to heat and generate steam.
5. If the device is still not producing steam, it may be clogged. Refer to the maintenance section for cleaning instructions.

Issue: The steam output is weak or insufficient.

Solution:

1. Check the mist intensity control knob and ensure that it is set to the desired level. Adjust it to a higher setting if needed.
2. If using tap water, mineral buildup may be causing reduced steam output. Consider using distilled or purified water to prevent mineral deposits.
3. Clean the nozzle and water tank as per the maintenance instructions to remove any blockages.

Issue: The device is overheating.

Solution:

1. Turn off the device immediately if you notice excessive heat or an unusual odor.
2. Unplug the device from the power source and allow it to cool down for at least 15 minutes.
3. Check for any obstructions in the nozzle or water tank that may be affecting airflow.
4. Ensure proper ventilation and avoid covering the device while in use.
5. If overheating persists, discontinue use and contact Colorfarm customer support for assistance.

Issue: Water is leaking from the device.

Solution:

1. Check the water tank and ensure it is securely attached to the device.
2. Confirm that the water tank is not overfilled, as excessive water may lead to leakage.
3. Inspect the water tank for any cracks or damage that may cause leaks. Replace the tank if necessary.
4. If the issue persists, contact Colorfarm customer support for further guidance.

Issue: The automatic shut-off feature is not working.

Solution:

1. Check the user manual to ensure that you are following the recommended usage time for the automatic shut-off function to activate.
2. Verify that the device is plugged into a functioning power source and turned on during use.
3. If the automatic shut-off feature still does not work, there may be a malfunction. Contact Colorfarm customer support for assistance.

Issue: Skin irritation or discomfort during or after use.

Solution:

1. Ensure that the mist intensity is set to a comfortable level for your skin.
2. Avoid keeping the steam nozzle too close to your face, as this may cause discomfort.
3. Discontinue use if you experience skin irritation or discomfort and consult a dermatologist if necessary.

FAQs

What is the purpose of the Colorfarm ‎MK-FS60 Nano Ionic Hot Mist Face Steamer?

The Colorfarm ‎MK-FS60 Nano Ionic Hot Mist Face Steamer is designed to provide hot mist to your face, which can help open up pores, moisturize the skin, and improve skincare product absorption.

Can I use the Colorfarm ‎MK-FS60 for daily skincare routines?

Yes, the Colorfarm ‎MK-FS60 can be used as part of your daily skincare routine to help revitalize and hydrate your skin.

How does the Colorfarm ‎MK-FS60 work?

The Colorfarm ‎MK-FS60 works by converting pure water into nano-sized water molecules, creating a fine mist that is applied to the face. This mist can help hydrate and cleanse the skin.

What skin types is the Colorfarm ‎MK-FS60 suitable for?

The Colorfarm ‎MK-FS60 is suitable for various skin types, including dry, oily, combination, sensitive, and normal skin.

How long does it take for the steam to start coming out from the Colorfarm ‎MK-FS60?

Users have reported that the wait time for steam to start coming out from the Colorfarm ‎MK-FS60 is minimal, often within a few minutes.

Is the Colorfarm ‎MK-FS60 portable and easy to use at home?

Yes, the Colorfarm ‎MK-FS60 is designed for home use and is easy to operate.

Can the Colorfarm ‎MK-FS60 help with skincare concerns like fine lines and wrinkles?

Users have reported that the hot mist from the Colorfarm ‎MK-FS60 can help improve skin moisture and reduce the appearance of fine lines and wrinkles over time.

How long does a typical steaming session with the Colorfarm ‎MK-FS60 last?

The steam produced by the Colorfarm ‎MK-FS60 can last for at least 30 minutes during a typical session.

Can I use essential oils with the Colorfarm ‎MK-FS60?

It's recommended to use only pure water with the Colorfarm ‎MK-FS60 to avoid any potential damage to the device.

Is the Colorfarm ‎MK-FS60 easy to clean?

Keeping the Colorfarm ‎MK-FS60 clean is important. Regularly clean the water reservoir and follow the manufacturer's instructions for maintenance.

Does the Colorfarm ‎MK-FS60 have any additional features?

Some models may have additional features, such as a purify light inside, which can help clean the dirt and impurities on your skin.

Video-Colorfarm ‎MK-FS60 Nano Ionic Hot Mist Face Steamer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>