ALPINE EV-40MR-T 4 Component Speaker System for Tesla User Manual
- June 16, 2024
- Alpine
Table of Contents
ALPINE EV-40MR-T 4 Component Speaker System for Tesla
Product Information
Specifications
- Component: 4 Component Speaker System
- Designed for: Tesla cars
- Woofer Single body diameter: 4″ (165mm)
- Alto screw hole spacing: 1: 98.6mm, 2: 81.7mm
- Installation diameter: 102mm
- Installation depth/plug-in installation: 44mm
- Installation height: 5.8mm
- Unit weight: 219g
- Maximum rated power (RMS): 40W
- Maximum peak power (Peak): 160W
- Impedance: 4Ohm (DCR 3Ohms)
- Sensitivity: 90dB SPL (1W @ 1m)
- Frequency response: 100Hz – 18kHz
- Resonance Frequency: 100Hz
Product Usage Instructions
Precautions
- Prohibited: Indicates a prohibited action (must not be performed).
- Mandatory: Indicates a mandatory operation (must be performed).
- Warning: Indicates that it should draw your close attention. In case of problems, please stop using the device immediately. Continued use may result in personal injury or damage to the product. Please return the product to the authorized Alpine dealer or nearby Alpine service center for repair.
- Caution: Please regularly clean the item with a soft, dry cloth. For tough stains, use only water to dampen the cloth as other solvents may result in dissolution.
Installation
- The product is only suitable for 12V negative-grounded vehicles. Use within other types of vehicles may create a fire or electrical hazard. Please contact a professional for wiring and installation.
- This product requires professional expertise to wire and install. Please contact the dealer from whom you bought the product to install it safely.
- Please do not disassemble or refit. Doing so may result in product damage, fire, or electrical hazard.
- Small items like bolts or screws must be kept out of the reach of children. If ingested, please seek immediate medical attention to avoid serious injury.
- Please do NOT use functions that may distract you while driving. Any device function that may influence your attention must be used only when the vehicle is stopped completely. To use these functions, make sure to stop your vehicle in a safe area first. Otherwise, it may result in an accident.
- While driving, you must maintain the volume at a level that allows outside noise to remain audible. It is very dangerous not to hear an emergency vehicle alarm or road warning signal (such as a railway crossing) and may result in an accident. Moreover, excessively loud volume may create permanent hearing damage or hearing loss.
Maintenance
Please regularly clean the item with a soft, dry cloth. For tough stains,
use only water to dampen the cloth as other solvents may result in
dissolution.
System Matching
This product is specially designed for Tesla cars and is not suitable for
other vehicles.
Product Dimensions
FAQ
-
Q: Can I use this speaker system in a non-Tesla car?
A: No, this speaker system is specially designed for Tesla cars and is not suitable for other vehicles. -
Q: Can I install the speaker system myself?
A: It is recommended to contact the dealer from whom you bought the product to install it safely. This product requires professional expertise to wire and install. -
Q: What should I do if there is a problem with the product?
A: In case of a problem, please do not attempt to repair the product yourself. Please return it to the authorized Alpine dealer or Alpine service center for repair.
EV-40MR-T
4″ Component Speaker System for Tesla For iPhone users, please search “Alpine
Music” in APP Store to download and install the tuning software; for Android
users, please scan the QR code on the right to download and install the
software directly.
Operation Instructions
Types of Precautions
Prohibited
| Indicates a prohibited action (must not be performed).
---|---
Prohibited
| Indicates that disassembly is prohibited.
Mandatory
| Indicates a mandatory operation (must be performed).
****| Indicates that it should draw your close attention.
Warning
-
****In case of problems, please stop using the device immediately.
Continued use may result in personal injury or damage to the product. Please return the product to the authorised Alpine dealer or nearby Alpine service center for repair. -
The product is only suitable for 12V negative-grounded vehicles.
Use within other types of vehicles may create a fire or electrical hazard. -
Please contact a professional for wiring and installation.
This product requires professional expertise to wire and install. Please contact the dealer from whom you bought the product to install it safely. -
****Please do not disassemble or refit.
Doing so may result in product damage, fire or electrical hazard. -
Small items like bolts or screws must be kept out of the reach of children.
If ingested, please seek Immediate medical attention to avoid serious injury. -
Please do NOT use functions that may distract you while driving.
Any device function that may influence your attention must be used only when the vehicle is stopped completely. To use these functions, make sure to stop your vehicle in a safe area first. Otherwise, it may result in an accident. -
While driving, you must maintain the volume at a level that allows outside noise to remain audible.
It is very dangerous not to hear an emergency vehicle alarm or road warning signal (such as a railway crossing) and may result in an accident. Moreover, excessively loud volume may create permanent hearing damage or hearing loss.
Caution
-
Product maintenance
Please regularly clean the item with a soft, dry cloth. For tough stains, use only water to dampen the cloth as other solvents may result in dissolution. -
Temperature
Before starting the device, please ensure that the temperature inside the vehicle is between +60°C and -20°C. -
Repair
In the case of a problem, please do not attempt to repair the product yourself. Please return the product to the authorised Alpine dealer or Alpine service center. -
System matching
This product is specially designed for Tesla cars and is not suitable for other vehicles. -
Installation environment
The device cannot be installed at the following locations:- Under direct sunlight or near a source of heat.
- With high humidity or near a source of water.
- Dusty environments.
- Environments with violent vibration.
Components
Woofer
Specifications
Woofer | 4″ (165mm) Woven carbon fibre cone |
---|---|
Single body diameter | 102mm |
Alto screw hole spacing | 1: 98.6mm |
2: 81.7mm
Installation diameter| 92mm
Installation depth/plug-in installation| 44mm
Installation height| 5.8mm
Unit weight| 219g
Maximum rated power (RMS)| 40W
Maximum peak power (Peak)| 160W
Impedance| 4Ohm (DCR 3Ohms)
Sensitivity| 90dB SPL (1W @ 1m)
Frequency response| 100Hz – 18kHz
Resonance Frequency| 100Hz
Product Dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>