ALPINE EV-Series Subwoofer User Manual
- June 16, 2024
- Alpine
Table of Contents
ALPINE EV-Series Subwoofer
Product Information
Specifications
- Subwoofer diameter: 10″ (254mm)
- Unit weight: 6.0kg
- Maximumratedpower (RMS): 100W
- Maximum peak power (Peak): 500W
- Impedance : 4Ohms (DCR 3.6Ohms) + 4Ohms (DCR 3.6Ohms)
- Sensitivity: 86dB SPL (1W @ 1m)
- Frequency response: 25Hz – 300Hz
- Resonance frequency: 25Hz
Product Dimensions
The dimensions of the product are not provided in the user manual.
Product Usage Instructions
Precautions
- Prohibited: Indicates a prohibited action that must not be performed.
- Prohibited: Indicates that disassembly is prohibited.
- Mandatory: Indicates a mandatory operation that must be performed.
- Warning: In case of problems, please stop using the device immediately. Continued use may result in personal injury or damage to the product. Please return the product to the authorised Alpine dealer or nearby Alpine service center for repair.
- Caution: Please do not disassemble or refit. Doing so may result in product damage, fire, or electrical hazard.
Installation
- The product is only suitable for 12V negative-grounded vehicles. Use within other types of vehicles may create a fire or electrical hazard. Please contact a professional for wiring and installation.
- This product requires professional expertise to wire and install. Please contact the dealer from whom you bought the product to install it safely.
Product Maintenance
Please regularly clean the item with a soft, dry cloth. For tough stains,
use only water to dampen the cloth as other solvents may result in
dissolution.
Usage While Driving
- Please do NOT use functions that may distract you while driving. Any device function that may influence your attention must be used only when the vehicle is stopped completely. To use these functions, make sure to stop your vehicle in a safe area first. Otherwise, it may result in an accident.
- While driving, you must maintain the volume at a level that allows outside noise to remain audible. It is very dangerous not to hear an emergency vehicle alarm or road warning signal (such as a railway crossing) and may result in an accident. Moreover, excessively loud volume may create permanent hearing damage or hearing loss.
Frequently Asked Questions (FAQ)
-
Q: Can I use this subwoofer with vehicles other than Tesla cars?
A: No, this product is specially designed for Tesla cars and is not suitable for other vehicles. -
Q: Can I repair the product myself if there is a problem?
A: No, in the case of a problem, please do not attempt to repair the product yourself. Please return the product to the authorised Alpine dealer or Alpine service center.
10″ EV-Series Subwoofer for Tesla Model 3
For iPhone users, please search “Alpine Music” in APP Store to download and
install the tuning software; for Android users, please scan the QR code on the
right to download and install the software directly.
Operation Instructions
Types of Precautions
** Prohibited** | Indicates a prohibited action (must not be performed). |
---|---|
** Prohibited** | Indicates that disassembly is prohibited. |
** Mandatory** | Indicates a mandatory operation (must be performed). |
**** | Indicates that it should draw your close attention. |
Warning
-
In case of problems, please stop using the device immediately.
Continued use may result in personal injury or damage to the product. Please return the product to the authorised Alpine dealer or nearby Alpine service center for repair. -
The product is only suitable for 12V negative-grounded vehicles.
Use within other types of vehicles may create a fire or electrical hazard. -
Please contact a professional for wiring and installation.
This product requires professional expertise to wire and install. Please contact the dealer from whom you bought the product to install it safely. -
Please do not disassemble or refit.
Doing so may result in product damage, fire or electrical hazard. -
Small items like bolts or screws must be kept out of the reach of children.
If ingested, please seek Immediate medical attention to avoid serious injury. -
Please do NOT use functions that may distract you while driving.
Any device function that may influence your attention must be used only when the vehicle is stopped completely. To use these functions, make sure to stop your vehicle in a safe area first. Otherwise, it may result in an accident. -
While driving, you must maintain the volume at a level that allows outside noise to remain audible.
It is very dangerous not to hear an emergency vehicle alarm or road warning signal (such as a railway crossing) and may result in an accident. Moreover, excessively loud volume may create permanent hearing damage or hearing loss.
Caution
-
Product maintenance
Please regularly clean the item with a soft, dry cloth. For tough stains, use only water to dampen the cloth as other solvents may result in dissolution. -
Temperature
Before starting the device, please ensure that the temperature inside the vehicle is between +60°C and -20°C. -
Repair
In the case of a problem, please do not attempt to repair the product yourself. Please return the product to the authorised Alpine dealer or Alpine service center. -
System matching
This product is specially designed for Tesla cars and is not suitable for other vehicles. -
Installation environment
The device cannot be installed at the following locations:- Under direct sunlight or near a source of heat.
- With high humidity or near a source of water.
- Dusty environments.
- Environments with violent vibration.
Components
Specifications
Subwoofer | 10″ (254mm) Woven carbon fibre cone |
---|---|
Subwoofer diameter | 262mm |
Unit weight | 6.0kg |
Maximum rated power (RMS) | 100W |
Maximum peak power (Peak) | 500W |
Impedance | 4Ohms (DCR 3.6Ohms) + 4Ohms (DCR 3.6Ohms) |
Sensitivity | 86dB SPL (1W @ 1m) |
Frequency response | 25Hz – 300Hz |
Resonance frequency | 25Hz |
Product Dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>