RovyVon A26 EDC Flashlight User Manual

RovyVon A26 EDC Flashlight

Specifications:

• Product Name: Aurora A26

• Manual Languages: English (EN), German (DE), French (FR),
  Spanish (ES), Italian (IT), Japanese (JP)

• Material: Polycarbonate (Body), Stainless steel (Head)

• Size: 79.5mm (Length) x 21.5mm (Diameter)

• Weight: 51g

• High Output: 6500K cool white Light source

• High CRI: 5000K neutral white

• Side light:

  • A26U: UV+Red+White
  • A26WU: White+UV+White
  • A26R: Red+White+Red

• UV wavelength: 365nm

• Red wavelength: 625nm

• White color temperature: 4000K

• Battery: Li-ion rechargeable, 850mAh

• Charging Method: USB-C

• Front Emitter Charging Spec: 5V 1A

• Charging time: 1 hour

• Magnetic clip

• Button1

• Button2

• Side emitter Charging, Low battery indicator

• Indicator:

  • Low battery: Red
  • Charging: Breathing blue
  • Fully charged: Green

• Protect Low battery: 3.0V; Voltage Cutoff voltage: 2.8V

• Water resistant: IPX8

• Impact resistant: 1.5m

• Key ring loop USB-C charging port

• Lock/Unlock

• Accessories: User manual, Warranty card, Pocket Accessories clip, USB C-A cable, USB cover, Key ring, O-ring

Product Usage Instructions

Unlocking and Locking:

Please unlock before first use. To unlock, press and hold Button 2 for 3 seconds or plug in charge.

Lock:

With the light switched off, long press Button 2 for 5 seconds to lock. The emitter will flash twice.

Unlock:

With the light locked, long press Button 2 for 3 seconds to unlock. The emitter will flash three times.

A26U UV+RED+WHITE Button 1 (For front emitter):

Note: The operation below is under unlock status (check Button 2)

Moon Mode:

With the light switched off, click Button 1 to turn on Moon mode, then click again to turn off.

Constantly On (Daily Modes):

Rapid double click Button 1 to turn on the last-used mode(memorized mode).

• Change Modes: Click Button 1 to cycle through Low-Med-High-Turbo.
• Turn Off: Press Button 1 for 0.5 seconds.

Emergency Modes:

Rapid double click Button 1 to turn on from Strobe mode.

• Change Modes: Click Button 1 to cycle through Strobe-SOS.
• Turn Off: Press Button 1 for 0.5 seconds.

Button 2 (For momentary on & Side Emitter):

Unlock:

With the light locked, long press Button 2 for 3 seconds to unlock. The FRONT emitter will flash three times.

Momentary On:

With the light switched off, press and hold Button 2 for Turbo mode of the FRONT emitter, release to turn off.

FAQ

How do I unlock the light?

To unlock the light, either press and hold Button 2 for 3 seconds or plug it in to charge.

How do I lock the light?

With the light switched off, long press Button 2 for 5 seconds to lock it. The emitter will flash twice.

How do I switch to Moon mode?

With the light switched off, click Button 1 to turn on Moon mode, then click again to turn it off.

How do I cycle through different modes?

In constantly on (daily) modes, click Button 1 to cycle through Low-Med-High- Turbo. In emergency modes, click Button 1 to cycle through Strobe-SOS.

How do I turn off the light?

To turn off the light, press Button 1 or Button 2 for 0.5 seconds.

Product Overview

Lock/Unlock

Product Information

Material

| Polycarbonate (Body), Stainless steel (Head)
---|---

Size

| 79.5mm (Length) x 21.5mm (Diameter)

Weight

|

51g

Light source

|

High Output: 6500K cool white

High CRI: 5000K neutral white

Side light

| A26U: UV+Red+White A26WU: White+UV+White A26R: Red+White+Red
UV wavelength: 365nm Red wavelength: 625nm

White color temperature: 4000K

Battery

|

Li-ion rechargeable, 850mAh

Charging

|

Method: USB-C

Spec: 5V 1A

Charging time: 1 hour

Indicator

|

Low battery: Red Charging: Breathing blue Fully charged: Green

Protect Voltage| Low battery: 3.0V; Cutoff voltage: 2.8V
Water-resistant|

IPX8

Impact resistant|

1.5m

Accessories

|

User manual, Warranty card, Pocket clip, USB C-A cable, USB cover, Keyring, O-ring

Operation

A26U

UV+RED+WHITE）

1. Lock: with the light switched off, long press for 5s to lock, the emitter will flash twice.
   • The operation below is under unlock status (check Button 2)
2. Moon: with the light switched off, click to turn on, then click again to turn off.
3. Constantly on (daily modes): rapid double click to turn on (memorized mode)
4. Change modes: click to cycle thru Low- Med-High-Turbo
5. Turn off: press 0.5s

  * The last-used mode will be memorized after the light was turned off.

4. Emergency modes: rapid double click to turn on from Strobe mode
5. Change modes: click to cycle thru Strobe-SOS
6. Turn off: press for 0.5s

A26WU

WHITE+UV+WHITE）

Button 1 (For front emitter）

1. Lock: with the light switched off, long press for 5s to lock, the emitter will flash twice.
   • The operation below is under unlock status (check Button 2)
2. Moon: with the light switched off, click to turn on, then click again to turn off.
3. Constantly on (daily modes): rapid double click to turn on (memorized mode)
4. Change modes: click to cycle thru Low- Med-High-Turbo
5. Turn off: press 0.5s

  * The last-used mode will be memorized after the light was turned off.

4. Emergency modes: rapid double click to turn on from Strobe mode
5. Change modes: click to cycle thru Strobe-SOS
6. Turn off: press for 0.5s

A26R

RED+WHITE+RED）

Button 1 (For front emitter）

1. Lock: with the light switched off, long press for 5s to lock, the emitter will flash twice.
   • The operation below is under unlock status (check Button 2)
2. Moon: with the light switched off, click to turn on, then click again to turn off.
3. Constantly on (daily modes): rapid double click to turn on (memorized mode)
4. Change modes: click to cycle thru Low- Med-High-Turbo
5. Turn off: press 0.5s

  * The last-used mode will be memorized after the light was turned off.

4. Emergency modes: rapid double click to turn on from Strobe mode
5. Change modes: click to cycle thru Strobe-SOS
6. Turn off: press for 0.5s

Button 2

(For momentary on & Side ）

1. Unlock: with the light locked, long press for 3s to unlock, the FRONT emitter will flash 3 times.
2. Momentary on: with the light switched off, press and hold for Turbo mode of the FRONT emitter, release to turn off.
3. Side emitter
4. White

  * A.Turn on: with the light switched off, a single click
  * B.Change modes: then click again to cycle through Low-High
2.  **Red**
  * A.Turn on: Rapid double click to turn on from Low mode
  * B.Change modes: click to cycle through Low High-Flash-Beacon
3. UV: Rapid triple click to turn on, then click to turn off
4. Turn off: press for 0.5s

Button 2

(For momentary on & Side emitter）

1. Unlock: with the light locked, long press for 3s to unlock, the FRONT emitter will flash 3 times.
2. Momentary on: with the light switched off, press and hold for Turbo mode of the FRONT emitter, release to turn off.
3. Side emitter
4. White

  * A.Turn on: with the light switched off, a single click
  * B.Change modes: then click again to cycle thru Low-High
  * C.Turn off: press for 0.5s
2.  **UV**
  * A.Turn on: rapid double click
  * B.Turn off: click or press for 0.5s

Button 2

(For momentary on & Side emitter）

1. Unlock: with the light locked, long press for 3s to unlock, the FRONT emitter will flash 3 times.
2. Momentary on: with the light switched off, press and hold for Turbo mode of the FRONT emitter, release to turn off.
3. Side emitter
4. White

  * A.Turn on: with the light switched off, single click
  * B.Change modes: then click to cycle thru Low-High
2.  **Red**
  * A.Constant on
    * a)Turn on: rapid double click to turn on from Low mode
    * b)Change modes: click to cycle thru Low- High
  *  **B.Signal**
    * a)Turn on: rapid triple click to turn on from Beacon
    * b)Change modes: click to cycle thru Beacon- Flash
3.  **Turn off: press for 0.5s**

Brightnesses Graphic

6500K Brightnesses Graphic

5000K Brightnesses Graphic

Magnetic clip

Specifications Sidelight

A26U (UV/Red/White)

Mode| White Low| White High| UV| Red Low| Red High| Red Flash| Red beacon
Output (lumens)| 2| 60| /| 3| 35| /| /
Runtime (hour)| 106| 5.5| 106| 48| 5.5| /| /
A26WU (White/UV/White)
Mode| UV| White Low| White High
Output (lumens)| /| 2| 80
Runtime (hour)| 7| 106| 5
A26R (Red/White/Red)
Mode| White Low| White High| Red Low| Red High| Red Beacon| Red Flash
Output (lumens)| 2| 60| 3| 45| /| /
Runtime (hour)| 106| 5.5| 48| 5.0| /| /

Note

|

1. Only Moon and Low modes are available while charging. 2. Charging will unlock the light automatically.

3.   The light is not able to turn on when the battery is lower than 2.8V, Plugging in to charge to reactivate it.

4. Click the button to turn off when a mode is working over 3 minutes.

5.   When the battery is low; a) If it’s turned on, the red indicator will be on constantly; b) If the light is switched off, clicking any button will get the red indicator on for 5s.

---|---

Warranty

|

1.  Time: 2 years since the date purchased.

2.  Any defective or malfunction by factitious is not under the warranty.

3. Warranty line: info@rovyvon.com

Warning!!!

|

1.  Don’t look directly into the emitter

2.  DO NOT point the light to human or animal eyes

3.  DO NOT cover the light head when it’s turned on

4.  Children under 12 years old are not permitted to use this light.

Runfree Equipment Technology Co., Ltd.

• Website: www.RovyVon.com
• Email : info@RovyVon.com
• Address: 702, Zongtai Future City, Taoyuan

Rd., Xixiang Street, Bao’An District, Shenzhen, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>