ICY BOX IB-PS111-PD 4 Port 100 W USB Power Delivery 3.0 Gan Wall Charger Instruction Manual
- June 16, 2024
- ICY BOX
Table of Contents
ICY BOX IB-PS111-PD 4 Port 100 W USB Power Delivery 3.0 Gan Wall Charger
Product Information
Specifications:
- Model: IB-PS111-PD
- Input Voltage: AC 110-240 V
- Input Frequency: 50/60 Hz
- Input Current: 1.3 A
- Output Voltage and Power:
- 5 V @ 3 A = 15 W
- 9 V @ 3 A = 27 W
- 12 V @ 3 A = 36 W
- 15 V @ 3 A = 45 W
- 20 V @ 3.25 A = 65 W
Product Usage Instructions
Section 1: Unboxing and Setup
- Open the package and take out the IB-PS111-PD.
- Remove the cover and locate the back of the device.
- Connect the power cord to the input port on the back of the device.
- Plug the other end of the power cord into a suitable power outlet with AC 110-240 V voltage and 50/60 Hz frequency.
Section 2: Charging Devices
The IB-PS111-PD is capable of charging various devices with different voltage and power requirements. Follow these steps to charge your device:
- Connect your device to the IB-PS111-PD using a compatible charging cable.
- Make sure the device is turned off or in standby mode.
- Set the desired output voltage on the IB-PS111-PD based on your device’s requirements. Choose from 5 V, 9 V, 12 V, 15 V, or 20 V.
- Turn on the IB-PS111-PD by pressing the power button located on the front of the device.
- Your device will start charging automatically.
Section 3: Safety Precautions
Ensure to follow these safety precautions while using the IB-PS111-PD:
- Do not expose the device to water or other liquids.
- Avoid using the device in high humidity or extreme temperature conditions.
- Keep the device away from heat sources and direct sunlight.
- Do not disassemble or modify the device. Refer to the manual for any troubleshooting or maintenance needs.
Frequently Asked Questions
Q: Can I use the IB-PS111-PD with devices that require less than 15 W?
A: Yes, you can use the IB-PS111-PD with devices that require lower power. The device will automatically adjust its output power based on the connected device’s requirements.
Q: Can I charge multiple devices simultaneously?
A: Yes, you can charge multiple devices simultaneously by connecting them to the IB-PS111-PD using compatible charging cables. However, please ensure that the total power requirements of all connected devices do not exceed the maximum power output of the IB-PS111-PD (65 W).
Q: How can I check the current output voltage of the IB-PS111-PD?
A: The IB-PS111-PD does not have a display for showing the current output voltage. You can refer to your device’s manual or settings to verify the charging voltage.
Q: What should I do if the IB-PS111-PD gets overheated?
A: If the device becomes excessively hot, immediately disconnect it from the power outlet and allow it to cool down before using it again. Ensure proper ventilation and avoid covering the device during operation.
IB-PS111-PD
USB Type-C® Wall Charger with USB Power Delivery
WHAT IS IN THE BOX
INSTALLATION
SPECIFICATION
www.quefairedemesdechets.fr
© Copyright 2023 by RaidSonic Technology GmbH. All Rights Reserved.
The intormation contained in this manual is believed to be accurate and
reliable. Kaid- Sonic Technology GmbH assumes no responsibility for any errors
contained in this manual. RaidSonic Technology GmbH reserves the right to make
changes in the spe- diorions contained in this manual my den not uly represent
the product tine. You are using and are there for illustration purposes only.
RaidSonic Technology GmbH assumes no responsibility for any differences
between the product mentioned in this manual and the product you may have.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>