Shark HP300 Series Air Purifier Owner’s Manual

Shark HP300 Series Air Purifier

Air Purifier HP300 Series

Specifications

• Model : HP300 Series
• Intended Use : Household
• Power Source : Electric
• Plug Type : Polarized
• Surface Requirement : Flat and dry surfaces

Product Usage Instructions

Safety Precautions
Before using the Air Purifier HP300 Series, please read and follow these important safety instructions

1. This appliance is intended for household use only.
2. Do not operate the unit with a damaged cord or plug. If the cord or plug is damaged, discard the unit or return it to an authorized service facility for examination and repair.
3. Avoid running the cord under carpeting, covering it with throw rugs, or routing it under furniture or appliances. Keep the cord away from high traffic areas to prevent tripping hazards.
4. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
5. Place the appliance only on flat and dry surfaces to ensure stability.
6. This appliance should not be used by individuals with reduced physical, sensory, or mental capabilities, unless they have received proper supervision or instruction from someone responsible for their safety.
7. Ensure that children are supervised and do not play with the appliance.
8. Cleaning and user maintenance should only be performed by adults or under adult supervision.
9. Prior to cleaning or performing maintenance, always unplug the appliance from the electrical outlet.
10. Do not handle the plug or appliance with wet hands to avoid electric shock.
11. Never use the appliance without the filter in place.
12. Avoid damaging the power cord by not pulling or carrying the appliance by the cord, unplugging by pulling on the cord, standing the appliance on the power cord, closing a door on the cord, pulling the cord around sharp corners, or leaving the cord near heated surfaces.
13. Ensure that no openings are blocked and keep the appliance free of dust, lint, hair, or any other obstructions that may reduce airflow.
14. If airflow is restricted, turn off the appliance, unplug it from the electrical outlet, and remove all obstructions before plugging in and turning on the unit again.
15. Do not use the appliance if it is not working correctly, has been dropped, damaged, left outdoors, or dropped into water.
16. Avoid placing the appliance on unstable surfaces such as chairs or tables.
17. Do not use the appliance in wet or damp surfaces, outdoor areas, or enclosed spaces that may contain explosive or toxic fumes or vapors.
18. Always turn off all controls before plugging in or unplugging the appliance.
19. Unplug the appliance from the electrical outlet when not in use and before performing any maintenance or cleaning.
20. Hand wash the exterior, hard plastic, and non-electronic parts with water only. Do not immerse the appliance in water, and avoid cleaning with chemicals that could damage the unit.

FAQ (Frequently Asked Questions)

• Q: Can I use this air purifier outdoors?
  A: No, the Air Purifier HP300 Series is not designed for outdoor use. It should only be used indoors.

• Q: Can children operate the air purifier?
  A: No, children should not operate the appliance. They should be supervised to ensure their safety and to prevent any misuse or accidents.

• Q: How often should I clean the filter?
  A: It is recommended to clean or replace the filter according to the manufacturer’s instructions. Generally, filters should be cleaned or replaced every 3 to 6 months, depending on usage and environmental conditions.

• Q: Can I use the air purifier without the filter?
  A: No, it is important to always use the air purifier with the filter in place. The filter is essential for capturing and removing airborne particles and pollutants.

Air Purifier HP300 Series
OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

GENERAL WARNINGS

1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. Unplug or disconnect the appliance from the power supply before servicing.

2. DO NOT operate any unit with a damaged cord or plug. Discard the unit or return to an authorized service facility for examination and/or repair.

3. D O NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Keep cord away from high traffic areas where it will not be tripped over.

4. I f the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

5. This appliance should only be placed on flat and dry surfaces.

6. T his appliance is not intended for use by anyone (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

7. Children should be supervised to ensure that they DO NOT play with the appliance.

8. C leaning and user maintenance shall not be made by children without supervision.

9. Prior to cleaning or other maintenance, the appliance must be unplugged from the electrical outlet.

10. DO NOT handle plug or appliance with wet hands.

11. D O NOT use without filter in place.

12. Only use Shark® branded filters and accessories.

13. DO NOT damage the power cord:

    • DO NOT pull or carry appliance by the cord or use the cord as a handle.
    • DO NOT unplug by pulling on cord. Grasp the plug, not the cord.
    • DO NOT stand the appliance on the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.

14. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

15. DO NOT use if airflow is restricted. If the air paths become blocked, turn the appliance off and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again.

16. DO NOT use if appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.

17. DO NOT place appliance on unstable surfaces such as chairs or tables.

18. DO NOT use in the following areas:

    • Wet or damp surfaces
    • Outdoor areas
    • Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)

19. Turn off all controls before plugging in or unplugging the appliance.

20. Unplug from electrical outlet when not in use and before any maintenance or cleaning.

21. Hand wash exterior/hard plastic/non-electronic parts with water only. Do not immerse. Cleaning with chemicals could damage the unit.

22. Make sure filter is in place after routine maintenance.

23. Not suitable for use with solid-state speed controls.
    ODOR NEUTRALIZER TECHNOLOGY

24. Observe the following when interacting with the Odor Neutralizer Technology cartridge.

    • DO NOT attempt to disassemble Odor Neutralizer Technology cartridge.

    • Avoid direct contact with the fragrance pod in the cartridge.

    • DO NOT directly inhale from the odor neutralizer technology cartridge.

    • Keep away from children and pets.

    • Keep away from heat, sparks, and open flame.

    • DO NOT place in direct sunlight.

    • Avoid contact with fabrics and finished surfaces.
      FRAGRANCE CARTRIDGE FIRST AID

    • Eye contact : Remove contact lenses if present. Rinse continuously with water for several minutes

    • Skin contact : Wash hands thoroughly after handling. If irritation or rash develops, seek medical advice/attention.

    • Inhalation : Move person to fresh air if they are experiencing any respiratory symptoms. If symptoms persist, seek medical advice/attention.

    • Ingestion : DO NOT induce vomiting. Seek medical advice/attention.

25. Dispose of batteries properly. Keep batteries away from children at all times. Even used batteries can cause injury.

WARNING : Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. When not changing batteries, keep the battery compartment completely closed. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

SAVE THESE INSTRUCTIONS

SETTING UP YOUR AIR PURIFIER

Parts

1. Air Output Vents
2. Odor Neutralizer Technology Dial
3. Control Panel
4. Front Display
5. Air Purifier Body
6. Air Intake Vents
7. Mesh Dust Filters
8. HEPA Filter
9. HEPA Filter Door

1. DO NOT plug in the air purifier. First, carefully turn the air purifier upside down and place it on a level floor surface. Rotate the filter door counterclockwise to unlock it, then lift it off to access the HEPA filter.

2. Take the HEPA filter out of its plastic packaging. Reinstall the HEPA filter in either orientation.

3. With the HEPA filter reinstalled, rotate the filter door clockwise until it clicks into place.

4. Set up the air purifier on a flat, level, floor surface, at least 3 inches (8 cm) away from walls and objects.
   If Odor Neutralizer Technology is included with your air purifier, find the odor cartridge and follow the instructions to install it.

5. Carefully remove the yellow sticker on the top of the air purifier to access the control panel.
   Plug the air purifier into an electrical outlet and press the power button on the top control panel.

6. When the air purifier power is on, the air purifier will begin to analyze the air quality, indicated by the rotating lights.
   After a few seconds, the air purifier will display the current air quality.

Note : Never Change HEPA Filter Technology allows up to 5 years* of use out of a single HEPA filter.
Tested to GB/T18801-2015 P.CCM, based on 50% CADR declined, 300 sq. ft. cleaning area and 12 hours daily operation on MAX fan speed.

CONTROL PANEL

There is a control panel on the top of the air purifier and a display screen

TOP CONTROL PANEL

FRONT DISPLAY SCREEN
Displays the current air quality status based on the Air Info mode selected on the top control panel.

TOP CONTROL PANEL BUTTONS

• On/Off : Press to turn the power on or off.

• Auto Mode : Press to turn on Auto Mode. In this setting the  fan speed automatically adjusts based on real-time air quality readings. As the air quality improves, the fan speed will decrease. If air quality worsens, the fan speed will increase. Leave your unit in Auto Mode for optimal filter life and performance.

• Fan Speed : Adjusts the speed of the fan. Select one of 5 settings  1 Quiet, 2 Low, 3 Medium, 4 High, 5 Maximum. Note : If fan speed is manually changed, Auto Mode will be deactivated. For tips and more information, see the Optimizing Fan Speed section.

• Air Info : Press to switch between air quality display options. See the Air Info Settings section for more information.

• Shut-Off Timer : Set the number of hours for the air purifier  to run before it automatically shuts off. Timer can be set from 1 to 12 hours.

• Brightness : Adjusts the brightness of both the front display  screen and the top control panel. Switch between 3 options : full brightness, partially dim, fully dim. In fully dim mode, the air purifier will continue to run with the LED light off—perfect for nighttime.

• Dust Filter Life : Press to show the remaining life of the mesh dust  filters before additional maintenance is required. When Dust Filter Life reaches 0%, the filter icon will flash to indicate the mesh dust filters need to be checked for debris buildup. See Mesh Dust Filter Maintenance section for more information.

• Child Lock : Press and hold for two seconds to lock the top control  panel buttons. To unlock, press and hold for two seconds again.
  Tips and Tricks
  

• Optimize Performance in Eco Mode : After 100% clean air  status is achieved for 5 minutes in Auto Mode, your air purifier will enter Eco Mode. Your unit’s filter life will be optimized.

• Turn Off Beeping : To turn off notification sounds, press and  hold the Air Info and Child Lock buttons at the same time for two seconds. To resume, press and hold both buttons again.

AIR INFO SETTINGS
The built-in sensor detects your air quality to give you real-time information. Use the AIR INFO button display options.

Displays the air quality rating
Poor: 0%–69%  • Fair: 70%–84%  • Good: 85%–100% % CLEAN AIR uses particulate matter (PM) air quality standards as determined by the EPA to calculate the air quality rating.

PARTICLE SIZES| The PM (particulate matter) value is the amount of particulate in your air, measured in micrograms (μg) per cubic meter. Your air purifier measures three particle sizes, PM1, PM2.5, and PM10.
PM1|

Displays the number of PM1-sized particles in your air, including ultra-fine allergens.

Allergens refers to non-living matter.

PM2.5|

Displays the number of PM2.5-sized particles in your air, including smoke.

PM10|

Displays the number of PM10-sized particles in your air, including dust, and pollen.

UNDERSTANDING YOUR AIR QUALITY
The rings on the front display will change color as your air quality changes, allowing you to easily monitor your air quality even when the air purifier is across the room.

• A blue ring means your air quality is good, with a low level of particle concentration.
• An amber ring means your air quality is fair, with a moderate level of particle concentration. For better results, increase fan speed or select Auto Mode.
• A red ring means your air quality is poor, with a high level of particle concentration. For better results, increase fan speed or select Auto Mode.

Note : The air quality sensor uses a cumulative particle count across all particle sizes to determine percentage of clean air.

TROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS

Product| What are the recommended settings?| We recommend using this air purifier in Auto Mode. Auto Mode leverages your air purifier’s particle sensor, and this adjusts the fan speed automatically. Higher fan speeds work best for reducing odors and capturing debris most effectively.
---|---|---
Where should I

set up my air purifier?

| We recommend setting up the air purifier in the room of your home where there is the most activity. This will help to clear the air of pollutants and odors as they are introduced.
What is Eco mode?| After 100% clean air is achieved for 5 minutes in Auto Mode, your air purifier will enter Eco Mode. The fan will turn off until a significant number of particles are detected, optimizing your HEPA filter’s life.
Can I mute the air purifier, so it doesn’t beep when pressing the buttons?| To turn off notification sounds, press and hold the Air Info  and Child Lock  buttons at the same time for two seconds. To reactivate sounds, press and hold both buttons for 2 seconds again.
Why are the top control panel buttons not working?| Your air purifier may have the child lock setting activated. Press and hold the Child Lock button for two seconds to turn this setting on or off.
Air Quality| Why is my air quality always at 100%?| If your air purifier displays a blue ring, your air quality is good. However, air quality will fluctuate as you introduce pollutants into your home. Activities like smoking, cooking, dusting, or spraying cleaning products (among other things) can add pollutants to your air. Our Clean Sense IQ™ technology tracks this fluctuation in real time and adjusts as it detects particles.

To determine if the sensor is working correctly, spray perfume or aerosol cleaning product near the sensor on the back of the air purifier. Please visit sharkclean.com/support for more information.

Why is my air quality never at 100%?| If your air quality never reaches 100%, make sure that the HEPA filter is properly installed and that its original plastic packaging has been removed. Activities like smoking, burning candles, running a humidifier, opening windows, and cooking (among other things) can add more pollutants to your air. Make sure to survey your environment and remove anything that could be causing low air quality.
Mesh Dust Filter| What are these filters on both sides of the air purifier for?| These easy-to-clean mesh dust filters capture large debris like hair, dust, and lint to protect the 3-layer HEPA filter. Maintenance is required on these mesh dust filters when indicated on the front display. Refer to the Mesh Dust Filter Maintenance section for more information.
How do I know when to clean these 2 filters?| When the mesh dust filters need maintenance, the front display will show a by pulsing red ring along with the text “check dust filters.” Refer to the Mesh Dust Filter Maintenance section for more information.
HEPA Filter| Can I wash the HEPA filter?| No, the HEPA filter is not washable. Keep filter away from water and dispose of it when it is dirty.

Customer Service
For further assistance, call 1-855-523-4061.
Note : Odor Neutralizer Technology is not included on all Shark HP300 series products.

MESH DUST FILTER MAINTENANCE

Checking the Mesh Dust Filters
When the mesh dust filters need maintenance, the front display will show the following screen with a pulsing red ring:

Cleaning the Mesh Dust Filters
When the Check Dust Filters message appears on the front display, remove the dust filters and inspect them for debris.
If maintenance is required, be sure to KEEP THE AIR PURIFIER PLUGGED IN and running, and complete the following steps

1. LOCATE AND REMOVE MESH DUST FILTERS
   Gently slide up the filters to remove them. Check the screens for dust and debris buildup.

2. CLEAN DUST FILTERS
   Use a vacuum cleaner on low speed with a soft brush attachment OR a cloth/towel to remove debris from the mesh screens. DO NOT use abrasive chemical cleaners.

3. ADDIITONAL CLEANING (NOT REQUIRED)
   If additional cleaning is required, rinse the mesh dust filters with room temperature tap water. Be sure to completely dry the screens for 12 hours before reinstalling. DO NOT USE the air purifier when mesh filers are wet .

4. REINSTALL MESH DUST FILTERS
   Gently reinsert the mesh dust filters into the slots on the sides of the air purifier. Be sure to push each dust filter into place until it is flush with the air purifier body.
   

5. RECALIBRATION
   Once both mesh dust filters have been cleaned and reinstalled, the air purifier will recalibrate and begin to analyze air quality, indicated by the rotating lights.
   Note : To manually reset the Check Dust Filters indicator, press and hold the filter icon on the top control panel for 1.5 seconds. Note : The Never Change HEPA Filter Technology allows up to 5 years* of use out of a single HEPA filter. Tested to GB/T18801-2015 P.CCM, based on 50% CADR declined, 300 sq. ft. cleaning area and 12 hours daily operation on MAX fan speed.

MAINTAINING YOUR AIR PURIFIER
NOTE : Unplug the air filter whenever doing any cleaning or maintenance (other than checking the mesh dust filters.)

Exterior Cleaning
For best results, clean the exterior every two months or as needed. Use a microfiber cloth to remove dust. To clean, wipe down the exterior with a microfiber cloth dampened with warm, soapy water. Avoid excess water and abrasive chemical cleaners to prevent damage.
Interior Cleaning
For best results, clean the interior of the air purifier every two months or as needed. Remove the filter door, take out the HEPA filter, and use a vacuum cleaner or a microfiber cloth to remove dust and debris from the interior. DO NOT use abrasive chemical cleaners or water on the inside of the air purifier.

ODOR NEUTRALIZER TECHNOLOGY

NOTE : Odor Neutralizer Technology is not included on all Shark HP300 series products.

1. OPEN THE PACKAGED ODOR CARTRIDGE ASSEMBLY
   Remove the odor cartridge assembly from the cardboard box and aluminum bag.

2. INSERT ODOR CARTRIDGE ASSEMBLY INTO AIR PURIFIER
   Flip up the handle on the odor dial, align the arrows, then insert the assembly into the air purifier.

3. ROTATE UNTIL CLICK
   To lock and engage the odor cartridge assembly, rotate it counterclockwise until it clicks at least once. Continue to rotate the dial toward the high position to increase the intensity.

SETTINGS
Settings : The Odor Neutralizer Technology dial has 4 intensity settings: Low, Medium, High, and Off.

| 1| OFF|  When you are not actively looking to reduce odors. This will extend the life of the odor cartridge.
2| LOW|

• Mild odor events such as trash smells.
• Small spaces like a bathroom or entryway.

3| MEDIUM|

• Strong odor events such as cooking or pet smells.
• Mid-sized spaces like a bedroom or kitchen.

4| HIGH|

• Optimal odor-reducing performance.
• Extreme odor events such as smoke or lingering burnt smells.
• Large spaces like a living room or multiple rooms.

Note : Adjusting the fan speed is another way to control Odor Neutralizer Technology intensity. See the Optimizing Fan Speed section for more information.

LOW
Rotate the dial to the Low position to decrease intensity to the lowest level when in use.
HIGH
Rotate the dial to the High position to increase intensity to the highest level when in use.

TIPS

Odor Cartridge Removal

• Remove the odor cartridge from the dial if you don’t want to use Odor Neutralizer Technology.
• To remove the cartridge, flip up the handle and rotate the odor dial clockwise until the two arrows are aligned. Pull the handle to remove the dial and access the cartridge.

Maintenance Required

• Replace the cartridge as recommended under Odor Cartridge Replacement.
• Visit qr.sharkclean.com/odortech to learn more and purchase replacements.

Fragrance Strength Over Time
The intensity of the Odor Neutralizer Technology’s fragrance may diminish over time. It may also have no noticeable fragrance at all. This is natural and does not indicate that the technology is not working. Follow replacement instructions to ensure continued performance.

ODOR NEUTRALIZER TECHNOLOGY REPLACEMENT

NOTE : Odor Neutralizer Technology is not included on all Shark HP300 series products.

1. REMOVE THE ODOR CARTRIDGE ASSEMBLY
   Flip up the handle and rotate the dial counterclockwise until the two arrows are aligned. Pull the handle to remove the dial from the air purifier.

2. REMOVE OLD ODOR CARTRIDGE
   Rotate the cartridge counterclockwise in the dial housing and pull out the cartridge to remove it.

3. REMOVE NEW CARTRIDGEFROM BAG
   Remove the new odor cartridge from the sealed packaging. To maintain the life of the cartridge, keep it in the sealed packaging until you are ready to install it.

4. INSTALL NEW CARTRIDGE IN DIAL
   Align the yellow arrow on the side of the cartridge with the yellow arrow on the side of the dial cover, then insert the cartridge into the dial. Rotate the cartridge clockwise to lock it in place.

5. INSTALL THE ODOR DIAL ASSEMBLY
   Align the arrow on the dial cover with the arrow on the air purifier, then reinsert the dial into the air purifier. Rotate the dial counterclockwise until it clicks into an intensity setting to engage. Rotate further to change the intensity setting.

6. USED CARTRIDGE DISPOSAL
   Dispose of the old cartridge by dropping it into the trash.

Note : Odor cartridges should be replaced every 3 months or as needed for optimal Odor Neutralizer Technology performance.

AVAILABLE ACCESSORIES

ORDER ADDITIONAL ACCESSORIES AND REPLACEMENT FILTERS

Odor Neutralizer Technology Cartridges (2)
Two replacement cartridges that guard against bad odors for a fresher-smelling home. We recommend replacing cartridges every 3 months or as needed in your air purifier. Odor Neutralizer Technology intensity dial sold separately.
Remote Control
Use the remote control to operate your air purifier from a distance.

REMOTE CONTROL BUTTONS

1. On/Off : Turns the air purifier on/off.
2. Air Info : Switch between air quality display options.
3. Auto : Enables Auto Mode.
4. Brightness : Adjusts brightness.
5. Fan Speed : Adjusts fan speed.
6. Shut-Off Timer : Sets shut-off timer.

TWO (2) YEAR LIMITED WARRANTY

The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is
not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to two (2) years from the original purchase date.
2. I n the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as filters and batteries, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., not replacing the filters), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer
Service Specialists are also available at 1-855-523-4061 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at register your shark.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-855-523-4061 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at register your shark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

IMPORTANT INFORMATION

REGISTER YOUR PURCHASE

registeryourshark.com
Scan QR code using mobile device

RECORD THIS INFORMATION

Model Number
Serial Number
Date of Purchase
(Keep receipt)
Store of Purchase

TECHNICAL SPECIFICATIONS

Voltage : 12OV~ 60Hz
Watts : 54W

Benefits of registering your product and creating an account

• Get easier, faster product support and access to warranty information
• Access troubleshooting and product care instructions
• Be among the first to know about exclusive product promotions

TIP : You can find the model and serial numbers on the QR code label on the bottom of the unit.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Air Purifier.
SharkNinja Operating LLC
US : Needham, MA 02494
CAN : Ville St-Laurent, QC H4S 1A7
1-800-798-739
sharkclean.com

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.
This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information.
© 2023 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. CLEAN SENSE IQ is a trademark of SharkNinja Operating LLC.
HP300Series-IB-A4-MP-Mv7-230713

BATTERY REMOVAL AND DISPOSAL
This product’s remote control uses a lithium button battery. When the battery no longer has a charge, it should be removed from the remote and recycled. DO NOT incinerate or compost the battery.
When your lithium battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances or regulations. In some areas, it is illegal to place spent lithium batteries in the trash or in a municipal solid waste stream. Return spent battery to an authorized recycling center or to retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.

FCC WARNINGS

Note : This unit has been tested and found to comply with FCC limits for Class B digital devices. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

To see if this unit interferes with radio or television reception, try turning it off and on.

To correct any interference

• Reorient or relocate the receiving antenna.
• Increase the distance between the unit and the receiver.
• Connect the unit to a different outlet than the receiver.
• Consult the dealer or an experienced technician for help.

Caution : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate it.

@sharkhome

Documents / Resources

| Shark HP300 Series Air Purifier [pdf] Owner's Manual
HP300 Series Air Purifier, HP300 Series, Air Purifier, Purifier
---|---

References

• Processing QR Code
• Find Shark® Clean Parts & Accessories - Shark®

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>