OBD2 V519 Scanner Diagnostic Tool User Manual

June 16, 2024
OBD2

OBD2 V519 Scanner Diagnostic Tool

Product introduction

V519 is a multi-functional vehicle fault diagnosis instrument that supports nine OBD Il/EOBD standard protocols. It supports plug and play, can quickly read the vehicle fault information and vehicle parameters. It is a more comprehensive fault diagnosis instrument. Please read the product manual carefully before using this product. Thank you.

Notes

  1. Do not use abrasive cleaners to clean this product.
  2. Do not allow this product to be heated or close to fire sources.
  3. Do not expose the product to direct sunlight for a long time.
  4. Do not attempt to disassemble this product to make any modifications, as it does not contain any repair components.
  5. Do not use this product in the rain.
  6. If you do not plan to use this product for a long time, please store it in a dry environment to avoid extreme temperatures and dust.

Introduction to product Appearance and function keys

Product Description

  1. Product connecting line, used to connect vehicle OBD interface
  2. 2.8-inch colour display screen, resolution: 240*320
  3. Read the current fault code quickly
  4. I/M ready state
  5. Back/Exit
  6. 6/7/8/9 Up, down, left and right buttons
  7. Confirmation
  8. Software upgrade/printing interface
  9. The fault code is read
  10. The connection fails
  11. The connection is successful

Product parameters and accessories

Product parameters

  • Working voltage: DC 9-16V
  • Operating current: 48~72mA
  • Operating environment: – 20~65 C
  • Storage temperature: -30 ~ 70 C
  • Overall dimensions: 1558724mm

Product fittings

  • fittings
  • host *1
  • Instructions *1

Support Agreements

  1. SAE J1850 PWM (41.6Kbaud)
  2. SAE J1850 VPW (10.4Kbaud)
  3. ISO 9141-2(5 baud init, 10.4Kbaud)
  4. ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)
  5. ISO 14230-4 KWP (fast init, 10.4 Kbaud)
  6. ISO 15765-4 CAN (11bit ID, 500 Kbaud)
  7. ISO 15765-4 CAN (29bit ID, 500 Kbaud)
  8. ISO 15765-4 CAN (11-bit ID, 250 Kbaud)
  9. ISO 15765-4 CAN (29bit ID, 250 Kbaud)

Main functions

  1. Support nine OBD II/EOBD standard protocols
  2. Read the automobile engine fault code
  3. Clear engine fault code
  4. Vehicle fault freeze frame
  5. I/M ready state
  6. Vehicle information
  7. Automobile data flow
  8. Battery voltage reading
  9. Mode 6 detection
  10. Oxygen sensor test
  11. Mode 8 detection
  12. Fault code query
  13. Playback function
  14. Print function
  15. Support ten languages: English, German, French, Spanish, Italian Russian, Dutch, Chinese, Japanese, Portuguese

**Automobile inspection

**

Find the special OBD interface for cars. The positions of OBD interfaces of different models are different (usually located in the inner panel at the lower left of the instrument panel, that is, above the accelerator pedal. For other models, see the figure below) Start the vehicle after insertion

OBD2-V519-Scanner-Diagnostic-Tool-fig-2

Test main menu
After connecting the vehicle, enter the main page, select the “Diagnosis” menu, and press the OK key to enter the test function page. This menu has 9 test functions, and you can use the direction function kevs to move and selectOBD2-V519-Scanner-Diagnostic-Tool-fig-3

Code reading

  • Select the code reading function, and the product will diagnose the automobile engine system
  • If the vehicle has an engine fault, the engine fault code and fault definition will be read
  • If there are multiple fault codes, you can use the up, down, left and right buttons to turn pages
  • Procc OK/-XIT to roturnI

Clear codeOBD2-V519-Scanner-Diagnostic-Tool-fig-5

  • Select “Clear Code” and a confirmation message will appear. After confirming that the fault code is cleared, the vehicle engine fault light
  • will go out and the code is cleared successfully If the clearing fails, it can be cleared when the engine is powered off

Freeze frame

  • Freeze frame refers to the snapshot data automatically recorded by the automobile computer when the emission system has a fault code, which is a good function to help determine the cause of the fault

OBD2-V519-Scanner-Diagnostic-Tool-fig-6

I/M ready state

  • The I/M ready function is used to check whether the car monitor is OK or NIA. During specific driving time, each monitor has specific driving conditions and required time
  • OK means the monitoring test is completed
  • INC indicates that the vehicle has not completed monitoring
  • N/A means that the modified vehicle does not support this monitoring

OBD2-V519-Scanner-Diagnostic-Tool-fig-7

Vehicle information
The vehicle identification code and other information can be viewed after entering the vehicle information

OBD2-V519-Scanner-Diagnostic-Tool-fig-8

Data stream
After entering the data stream, the product will read the current real-time data stream information of the automobile engine

OBD2-V519-Scanner-Diagnostic-Tool-fig-9

Mode 6

  • Select mode 6 to enter on-board monitoring test

OBD2-V519-Scanner-Diagnostic-Tool-fig-10

  • Enter the sensor monitoring interface

Oxygen sensor test
When entering the oxygen sensor test item, the oxygen sensor value of the tested vehicle will be read to determine whether the various test data are normally

OBD2-V519-Scanner-Diagnostic-Tool-fig-12

Mode 8

  • Mode 8 component test project

OBD2-V519-Scanner-Diagnostic-Tool-fig-13

Query the fault code library

  • Enter the query fault code option, the user can use the direction keys to adjust the fault code, turn to the fault code to be queried and select “OK” to query the fault definition

OBD2-V519-Scanner-Diagnostic-Tool-fig-14

Playback

  • Enter the playback option to view the fault code playback record and data stream playback record

OBD2-V519-Scanner-Diagnostic-Tool-fig-15

Voltage
Enter the voltage option to read the current battery voltage data of the detected vehicle

OBD2-V519-Scanner-Diagnostic-Tool-fig-16

Settings
Enter the setting option to adjust the language, unit and other settings of multiple product parameters

OBD2-V519-Scanner-Diagnostic-Tool-fig-17

Software upgrade

Software Upgrade Procedure

  1. Log in to “elm327. com” to download “V519ProductTool”
  2. After successful download, use a Type-C data cable to connect the product and computer
  3. Double click to run “V519ProductTool”
  4. Select Update Firmware
  5. Select “Start update” and wait until the upgrade is successful

OBD2-V519-Scanner-Diagnostic-Tool-fig-19

Print


Software Upgrade Procedure

  1. Log in to “elm327. com” to download “V519Product Tool”
  2. After successful download, use a Type-C data cable to connect the product and computer
  3. Double click to run “V519ProductTool”
  4. Select “Review Datastream”
  5. After successful reading, the vehicle data stream information will be displayed, which can be copied for printing

OBD2-V519-Scanner-Diagnostic-Tool-fig-21

Notes
The product is not compatible with new energy vehicles, hybrid vehicles, and vehicle types that do not conform to the OBD2 agreement

Disclaimer

We are committed to providing customers with unparalleled customer support before and after-sales. Here are our exemption conditions for products:
If any of the following conditions are met, the customer shall not enjoy the policy within the scope of this limited warranty :

  • a) Abnormal use, abnormal conditions, improper storage, exposure to humidity or unauthorized modification, misuse, negligence, abuse, accident, change, improper installation or other non-fault behaviours, including damage caused by transportation.
  • b) Our company will not be responsible for the product damage caused by external reasons (such as collision with objects) or fire, flood, sand, dust, storm, lightning, earthquake or weather conditions, acts of God irresistible or battery leakage, theft, fuse breaking, incorrect use of any power supply

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals