levelone KILBY 28 Port Stackable L3 Managed Gigabit Switch Owner’s Manual

KILBY 28 Port Stackable L3 Managed Gigabit Switch

Specifications

• Model Number: GTL-2891
• Product Name: KILBY 28-Port Stackable L3 Managed Gigabit Switch
• Number of Ports: 28
• 10GbE SFP+ Ports : 2
• 10GbE Module Slot: 1
• Switching Capacity: 128Gbps
• Packet Buffer Size : 1.5 Mbits
• LED Indicators: Port, Uplink, System, Diagnostic
• CPU : Marvell SheevaTM CPU core, ARM-compatible, Feroceon 800MHz
• Memory : 256 MB
• Flash Memory: 128 MB
• Rack Mount : 19″
• Power Supply: AC power
• Color : Black
• Dimensions (W x D x H): 440 x 315 x 44 mm
• EAN : 4015867199015

Product Usage Instructions

Installation

1. Choose a suitable location for the switch in your network setup.
2. Ensure that there is proper ventilation and enough space around the switch for heat dissipation.
3. Connect the power cord to the AC power source and the switch’s power input.
4. If you want to mount the switch on a rack, use the provided 19″ Rack Mount Kit.
5. Connect the desired network devices to the switch’s ports using Ethernet cables.
6. If necessary, insert 10GbE SFP+ modules into the corresponding ports.
7. Power on the switch.

Configuration
The switch can be configured using the console port or through a web-based management interface. Follow the steps below to configure the switch:

Console Configuration:

1. Connect a computer to the switch’s console port using the provided console cable.
2. Open a terminal emulation program on the computer (e.g., PuTTY).
3. Configure the terminal emulation program with the following settings:
   • Baud rate : 9600
   • Data bits : 8
   • Parity: None
   • Stop bits : 1
   • Flow control : None
4. Power on the switch if it is not already powered on.
5. Once connected, follow the on-screen instructions to configure the switch according to your network requirements.

Web-based Configuration:

1. Ensure that your computer is connected to the same network as the switch.
2. Open a web browser on your computer.
3. Enter the IP address of the switch in the address bar of the web browser.
4. Log in to the web-based management interface using the provided credentials (refer to the user manual for default credentials).
5. Navigate through the interface to configure the switch settings according to your network requirements.

FAQ

1. Q: What are the power requirements for the GTL-2891 switch?
   A: The GTL-2891 switch requires AC power.

2. Q: Can I mount the switch on a rack?
   A: Yes, the GTL-2891 switch comes with a 19″ Rack Mount Kit for easy installation on a rack.

3. Q: How many 10GbE SFP+ ports does the switch have?
   A: The GTL-2891 switch has 2 10GbE SFP+ ports.

4. Q: Can I configure the switch using a web-based management interface?
   A: Yes, the GTL-2891 switch can be configured using a web-based management interface accessible through a web browser.

GTL-2891, KILBY 28-Port Stackable L3 Managed Gigabit Switch, 2 x 10GbE SFP+, 1 x 10GbE Modul Slot

Product Images

Short Description

IEEE-802.1d/w Spanning Tree Protocol (STP) und Port-Spiegelung

Additional Information

• CE Mark (EN55022 Class A) EN 61000-3-2/3 VCCI Class A FCC Part 15 Class A CB IEC 60950-1 & EN 60950-1
  UL/CUL UL 60950-1 & CSA 60950-1 WEEE RoHSCE Mark (EN55022 Class A) EN 61000-3-2/3 VCCI Class A FCC Part 15 Class A CB IEC 60950-1 & EN 60950-1 UL/CUL UL 60950-1 & CSA 60950-1 WEEE RoHS

• Stromversorgung

  • AC power

• Standards

  • IEEE 802.1p Quality of Service (QoS) IEEE 802.1x port authentication IEEE 802.3x Ethernet frame start and stop requests and timers used for flow control on full-duplex links IEEE 802.3u CSMA/CD access method and physical layer specifications for 100 BASE-TX Fast Ethernet IEEE 802.3z CSMA/CD access method and physical layer  specifications for 1000 BASE Gigabit Ethernet IEEE 802.1q Virtual LAN IEEE 802.1d Spanning Tree Protocol IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE
  • 802.1s Rapid Spanning Tree Protocol IEEE 802.1w Multiple Spanning Tree Protocol IEEE 802.1p Quality of Service (QoS) IEEE 802.1x port authentication IEEE 802.3x
  • Ethernet frame start and stop requests and timers used for flow control on full-duplex links IEEE 802.3u CSMA/CD access method and physical layer specifications for 100
  • BASE-TX Fast Ethernet IEEE 802.3z CSMA/CD access method and physical layer specifications for 1000 BASE Gigabit Ethernet IEEE 802.1q Virtual LAN IEEE 802.1d Spanning Tree Protocol IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.1s Rapid Spanning Tree Protocol IEEE 802.1w Multiple Spanning Tree Protocol

• OAM : IEEE 802.3ah Link IEEE 802.1ag Connectivity Fault Management (CFM) ITU-T Y.1731 performance and throughput management

• Stacking Features : IP Clustering up to 36 devices, bandwidth up to 10G Hardware Stacking up to 8 units, bandwidth up to 20G

• Quality of Service(QoS): T raffic Classification based on IEEE 802.1p CoS, IP Precedence, IP DSCP Traffic Scheduling based on Strict Priority, Weighted Round Robin, Strict + WRR traffic scheduling IGMP Snooping MVR (Multicast VLAN Registration) QinQ/Selective

• QinQ G.8032 (ERPSv1/v2) IPv4/IPv6 dual protocol stack VLANs: – Supports 4K IEEE 802.1Q VLANs – Port-based -GVRP/GARP – VLAN Translation – IEEE 802.1v Protocol-based VLANs – MAC-based VLANs – IP subnet-based VLAN – Private VLAN (Community) – Traffic Segmentation (port isolated) – Guest VLAN – Voice VLAN – VLAN trunking – Support UDLD BPDU
  Guard/filtering/Forward L3 Features IPv4 Static unicast routes Equal cost multipath routing (ECMP) RIP v1/v2 OSPF BGP4+ PIM-DM IGMP v1/v2 IGMP v1/v2 proxy IGMP v3 IGMP v3 proxy PIM-SM VRRP Proxy ARP UDP Helper L3 Features IPv6 PIM-DM6 PIM-SM6 IPv6 static route OSPFv3 MLD v1/v2 Dynamic

• RouteOAM : IEEE 802.3ah Link IEEE 802.1ag Connectivity Fault Management (CFM) ITU-T Y.1731 performance and throughput management

• Stacking Features : IP Clustering up to 36 devices, bandwidth up to 10G Hardware Stacking up to 8 units, bandwidth up to 20G

• Quality of Service(QoS) : Traffic Classification based on IEEE 802.1p CoS, IP Precedence, IP DSCP Traffic Scheduling based on Strict Priority, Weighted Round Robin, Strict + WRR traffic scheduling IGMP Snooping MVR (Multicast VLAN Registration) QinQ/Selective QinQ G.8032 (ERPSv1/v2) IPv4/IPv6 dual

• Protocol stack VLANs: – Supports 4K IEEE 802.1Q VLANs – Port-based -GVRP/GARP – VLAN Translation – IEEE 802.1v Protocol-based VLANs – MAC-based VLANs – IP subnet-based VLAN – Private VLAN (Community) – Traffic Segmentation (port isolated) – Guest VLAN – Voice VLAN – VLAN trunking – Support UDLD BPDU
  Guard/filtering/Forward L3 Features IPv4 Static unicast routes Equal cost multipath routing (ECMP) RIP v1/v2 OSPF BGP4+ PIM-DM IGMP v1/v2 IGMP v1/v2 proxy IGMP v3 IGMP v3 proxy PIM-SM VRRP Proxy ARP UDP Helper L3 Features IPv6 PIM-DM6 PIM-SM6 IPv6 static route OSPFv3 MLD v1/v2 Dynamic Route

• Farbe

  • Black

• EAN

  • 4015867199015

• Grade

  • Commercial

• PoE Supported

  • Ja

• Concurrent ports

  • 28,00 Total

• Series

  • KILBY series

• MTBF

  • 904,213 hr (25ﾡC)

https://www.level1.com/level1_de/gtl-2891-kilby-28-port-stackable-l3-managed- gigabit-switch-2-x-10gbe-sfp-1-x-10gbe-modul-slot-57081203

References

• GTL-2891, KILBY 28-Port Stackable L3 Managed Gigabit Switch, 2 x 10GbE SFP+, 1 x 10GbE Modul Slot - LevelOne

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>