etac 28470 Cross 5 Wheelchair Instruction Manual Product Information Product Usage Instructions Frequently Asked Questions (FAQ)
- January 15, 2024
- Etac
Table of Contents
28470 Cross 5 Wheelchair
Product Information
Specifications
-
Model: 28470
-
Tipskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh 37-55
Kippschutz mod 2 Std Sh 37-55 -
Part Number: 1a15685.2
-
Date: 2022-08-10
-
Product: Etac Cross 5 Active Etac Cross
Product Usage Instructions
Assembly Instructions
-
Identify the parts included in the package: x2 of part x1 and
x1 of part x2. -
Follow the steps below to assemble the product:
-
Start by attaching the x1 part to the base using the provided
screws. Tighten the screws with a maximum torque of 5Nm. -
Next, attach the x2 parts to the sides of the base using the
provided screws. Make sure to align them properly. -
Adjust the height of the assembled product to a range of 3-7 cm
as per your preference. -
Repeat the same assembly process for all four sides of the
product.
Product Usage
To use the Etac Cross 5, please follow these instructions:
-
Place the product on a stable surface, ensuring all four sides
are properly assembled and secured. -
Adjust the height of the product to your desired level within
the range of 3-7 cm. -
Make sure to distribute the weight evenly on the product
surface. -
Ensure the Tipskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh
37-55 Kippschutz mod 2 Std Sh 37-55 is properly installed to
prevent tipping. -
Follow any additional usage instructions provided in the user
manual for specific applications or scenarios.
Maintenance and Care
To keep your Etac Cross 5 in good condition, follow these
maintenance and care tips:
-
Regularly inspect the product for any signs of damage or
wear. -
Clean the product using a mild soap and water solution, and dry
it thoroughly. -
Avoid using abrasive cleaners or solvents that may damage the
product’s surface. -
Store the product in a dry and safe place when not in use.
Frequently Asked Questions (FAQ)
Q: Can I adjust the height of the Etac Cross 5?
A: Yes, the height of the Etac Cross 5 can be adjusted within a
range of 3-7 cm.
Q: How do I prevent tipping of the product?
A: To prevent tipping, make sure to properly install the
Tipskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh 37-55 Kippschutz
mod 2 Std Sh 37-55 included with the product.
Monteringsanvisning/Assembly instructions/Montageanweisung
28470
Tippskydd mod 2 std sh 37-55 Anti-tip mod 2 std sh 37-55 Kippschutz mod 2 Std
Sh 37-55
1a15685.2 2022-08-10 1
Etac Cross 5 Active Etac Cross
x2
x1
x2 x1
x1
max.5Nm Etac Cross 5
Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp www.etac.com
2
3-7 cm
D
D
D
D