SONOFF S26R2TPE Wi-Fi Smart Plug User Guide
- June 16, 2024
- SonOFF
Table of Contents
SONOFF S26R2TPE Wi-Fi Smart Plug
Download the eWeLink App
Power on
After powering on, the device will enter the Pairing Mode during the first use. The Wi-F LED indicator changes in a cycle of two short and one long flash and release.
Add Device
Tap “+” and select “Add Device”, then operate following the prompt on the App.
Guide to eWeLink and Alexa Accounts Linking
- Download the Amazon Alexa App and sign up for an account.
- Add Amazon Echo Speaker on the Alexa App.
- Account Linking (Link Alexa account on the eWeLink App)
After linking the accounts, you can discover devices to connect to the Alexa App according to the prompt.
Scan the QR code or visit the website to learn about the detailed user manual and help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmfulinterference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as the terms and conditions of such collection points.
SAR Warning
Under normal use conditions, this equipment should keep a separation distance
of at least 20 cm between the antenna and the body of the user.
Declaration of Conformity
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio
equipment type S26R2TPF/S26R2TPE/S26R2TPG/S26R2TPJ/S26R2TPH/
S26R2TPL/S26R2TPL-H comply with Directive 2014/53/EU. The full text of the EU
Declaration of Conformity is available at the following internet address:
https://sonoff.tech/usermanuals.
To ensure the safety of your electrical installation, either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 10A must been installed before the S26R2.
Shenzhen Sonoff Technologies Co., Ltd.
- Address: 1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China ZIP code: 518000
- Website: sonoff.tec.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>