Apolosign E0046 15.6 Inch Smart Photo Frame User Guide
- June 16, 2024
- apolosign
Table of Contents
Apolosign E0046 15.6 Inch Smart Photo Frame
Congratulations on your Apolosign brand new Smart Photo Frame!
Once you have set up your Frameo frame, you can start connecting it to your
friends and family.
Video tutorials Check out our “Frameo Tutorials” playlist on YouTube with
informative videos where we guide you on how to get started using Frameo. Scan
the code to find the playlist.
Frame Introduction
Getting Started
Step 1
Insert the stand into the hole on the frame
Step 2
Insert power cord firmly
Step 3
Set your frame, language, Wi-Fi, frame naming. time zone etc.
Step 4
Download and install Frameo APP in App Store(lOS)or Google Play (Android)
Now you can invite friends to share photos to your frame!
Connecting a new friend
- Download and install Frameo APP
- Click the add friend coin to show a sharing code(valid for 12 hours)
- Share the code to your friend
- Input the code via Frameo APP
Send Photos/Videos to The Frame
Package Contents
We’re here to help
Apolosign is always striving to achieve your total satisfaction! Should you
ever have any questions about your item, please feel free to email our
Lifetime Service Center.
Email: [email protected]
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Recycling & Environmentally Frlendly Disposal
In order to protect the environment, after the expiration of the products
service life, it should not be discarded in the samne way as domestic garbage;
Please recycle at a professional recycling center. For further information on
the recycling of this product, please consult your local municipality,
processing service center, or the store where you purchased the product. You
can help protect the environment! Please remember to respect the local
regulations, and hand in the non-working electrical equipment to an
appropriate waste disposal center.
Manufacturer: Shenzhen Electron Technology Co, Ltd
Address: Bld 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street,
Bao’an, Shenzhen, China