ZEEVA ET-0876 RC Inflatable Dinosaur Instruction Manual

ZEEVA ET-0876 RC Inflatable Dinosaur Instruction Manual Product Overview

Remote Control Inflatable T-rex

Charging Cable

Remote Control

Instruction Manual

Specifications

Frequency: 2.4 GHz FCC ID: 2ADMS-ET-0876
RC Inflatable Dinosaur T-rex Power Supply: Rechargeable Li-ion Battery 1200 mAh 7,4V (Included)
Battery Charging Time: 2 hours Charging Cable Induded
Remote Control Power |
Supply: 3 x AA 1.5V Batteries (Not Included)

Remote Control

Standard Control

Mote: To avoid losing control, always pay attention when contreding the Renote Control Index

Control Remote Control table Trasto move forward

Control Ramote Control ve backwani

Standard Control

Control Remote Control Inflatable Trex to turn left

Control Remote Control Inflatable T-rex to turn right

Control Remote Control Inflatable T-rex to Inflate/Deflate (When Remote Control Inflatable T-rex turn on, it will inflate.

Adjust the speed of Remote Control Inflatable T-rex (Two speed mode, fast and slow) automatically)

Power On/Off

Press & hold the ON/OFF button 2 second to tum on the Remote Control Inflatatile Trax. Press & hold the ON/OFF button 2 second to tum off the Remote Control Inflatable Tre.

Remote Control T-Rex Battery Charging

Make sure switch off the Remote Control Inflatable T-rex before charging. Unscrew the screw on the battery box cover to open the cover.
Unplug and take out the rechargeable Hon battery. Connect the Rechargeable Li- ion Battery to the charging cable and plug on a USB power adapter for charging.
The LED indicator on the charging cable will tum red while charging and will turn off once fully charged.
For your safety, please always use appropriate 5V output charger Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.
NOTE :
You must select a qualified charger from a regular manufacturer,

Battery Installation For Remote Control T-Rex

To install battery into the Remote Control Inflatable T-rex, unscrew the screw on the battery box cover to open the cover. Connect the rechargeable on battery to the Rernote Control Inflatable T-rex, Insert the rechargeable li- ion battery into the battery box. Replace the battery box cover and tighten the screw.

Batteries Installation For Remote Control

To install batteries into the Remote Control unscrew the screw on the battery box cover to open the cover.
Insert 3 x AA 1.5V batteries (Not Included) into the battery box.
Batteries should be placed as shown on the diagram. Replace the battery box cover and tighten the screw,
Notice:
When inserting the batteries, you must insert according to the corect polarity, the Remote Control won’t function if batteries are reversed.

IMPORTANT: BATTERY INFORMATION

AWARNING: DROWNING HAZARD
This is not a life-saving Device. Do not use in water.
▲Li-ion battery charging warning statement

The input to the product is BV 24.
In order to charge the product in salo manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. Only charge the product at ambient temperatures between 10 °C/50 F and 40 °C/104 °F. Do not heat above 70 “C/158 “F. eg. Do not expose to sunlight or throw into fre, Please note that we won’t take any responsibility for any wrong operation (eg, Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the fime the user using this product
For AA Batteries

WARNING: TO AVOID BATTERY LEAKAGE

1. Be sure to insert the batteries correctly, and always follow the toy/game and battery manufacturers instructions..
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. Always remove weak or dead batteries from the product. 4) Remove the battery if the product is left unused for a long period of time.

Charging Cable Rating 5V/2A Max.
ACAUTION: The charging cable included with this item is intended for use with this product Only use the included charging cable to charge this product.

Performance Tips

**** Do not drive the Renote Control Inflatable T-rex on grass, sand or go through water. 2. Do not drive the Remote Control Inflatable T-rex in windy or rainy weather.

1. Do not drive the Remote Control Inflatable T-rex into any sharp object.
2. Keep fingers, hair and loose clothing away from Remote Control Inflatable T-rex.

Care and Maintenance
Always use dry and soft cloth to clean this product.
Avoid this product from being exposed to sunlight or heat. Avoid immersing these toys in water, otherwise, the electronic parts may be damaged..
Check the product regularly. If any damages are discovered, please stop using immediately, until it is completely repaired in good working condition.

Warning
This product is suitable to be used by people who has operating experience in remote toy or aged no kess than 8 years old.
Please do not put the product in your mouth to prevent choking hazard of small parts, Please do not put the finger into available interspaces.
Please do not play the product in a brutal way such as throwing, crashing or twisting it.
Please store the smaller-sized product accessories in places that are out of reach of children, in order to avoid the occurrence of accidents
Avoid placing the batteries in places in high temperatures and avoid exposure to heat.
When young children are operating the product, it shall be ensured that the adults are guiding and making sure the product control is within the viewing range of the controler (or instructor) so that it makes the control of the toy more convenient. When the product is not in use, please switch off the power supplies of the toy, and remove the batteries from the product

Please note that we won’t take any responsibility for any wrong operation as this may result in severe injury or  loss of property, and we cannot control the operating processduring the time when the user assembles or uses this product,

Once this product is sold, we won’t be responsible for any safety responsibility during the time the user operates or uses controls this products,

FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the Imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio of television reception, which can be determined by tuming the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reonent or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio/ TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID :2ADM5-ET-0876
FC
Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106

Made In Shantou, China
Itemit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>