Semetor S09 Wireless Charger Speaker Nightlight Instruction Manual

Semetor S09 Wireless Charger Speaker Nightlight

Product Information

Specifications

• Transmitter Type : Unknown
• Antenna Type : Unknown
• RF Radiation Exposure Limits : Compliant with uncontrolled environment standards
• Minimum Distance between Radiator and Body : 5mm

Product Usage Instructions

Reorient or Relocate the Receiving Antenna
If you are experiencing poor signal reception, try reorienting or relocating the receiving antenna. Adjust the position of the antenna to optimize signal strength and minimize interference.

Increase the Separation between Equipment and Receiver
To improve performance and reduce interference, ensure there is enough separation between the equipment and receiver. Keep other electronic devices, metal objects, or obstacles away from the receiver to avoid signal degradation.

Connect the Equipment into a Different Circuit
If you encounter issues with interference or signal quality, connect the equipment into an outlet on a circuit different from the one to which the receiver is connected. This can help eliminate electrical noise or disturbances that may affect performance.

Consult the Dealer or Technician for Help
If you require further assistance with installation, troubleshooting, or optimizing performance, it is recommended to consult the dealer or an experienced radio/TV technician. They can provide expert guidance and support tailored to your specific setup.

Frequently Asked Questions (FAQ)

• Q: Can the transmitter operate with other antennas or transmitters?
  A: No, the transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

• Q: Is this equipment safe in terms of RF radiation exposure?
  A: Yes, this equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. It is designed to be installed and operated with a minimum distance of 5mm between the radiator and your body.

WIRELESS CHARGER SPEAKER WITH LAMP
CLOCCH AND WATCH/EARPHONE WIRELESS CHARGER

PRODUCT INSTRUCTIONS

Thank you so much for choosing our product, please read the manual carefully before using the product.

FEATURES

• Simple and exquisite.
• Night light.
• Wireless speaker
• Alarm clock.
• Wireless fast charger.
• Charging distance ≤6mm

CHARACTERISTIC

1.  Lamp chimney
2. Wireless charging area
3. Mobile phone holder
4. Silicone buttons
5.  Clock display area
6. Night light switch
7. Speaker cavity
8. Type-C input port
9.  Silicone foot pads

HOW TO OPERATE

1. Connect the USB port of the USB data cable to the power adapter and the Type-C port .The indicator light [ ] in the clock display area of the wireless charger flashes.
2. Place the required wireless charging device in the charging indication area of this product, and the clock will display The regional charging indicator | ] is always on, and turns off when it is fully charged.

NIGHT LIGHT FUNCTION

• Touch the switch in the first gear to start the light, and the light brightness is 30%.
• Touch switch second gear, light brightness is 70%.
• Touch switch third gear, light brightness 8988 is 100%.
• Touch the switch in the fourth position to turn off the lights.
• Turn on the lights in sequence.

BUTTON FUNCTION

HOW TO SET THE CLOCK

In normal clock display mode

• Short press [ ]in the clock display area, the clock starts to flash and enter the clock setting state. Short press [ ] to increase the number, Short press [ ] to decrease the number.

• Short press [ ] again to switch the minutes, the minutes start to flash, and enter the minute setting state, Short press [ ] to increase the number, Short press [ ] to decrease the number.

• Long press [ ] to save the current settings and return to the time display.

HOW TO SET THE ALARM

In normal clock display mode:

1.  Short press [ ] 4 times, in the clock display area, the alarm 1 [ ] icon and the clock flash at the same time, entering the alarm 1 clock setting state. Short press [ ] to increase the number, short press [ ] to decrease the number.
2.  Short press [ ] again to switch minutes, the minutes will start to flash and enter the minute setting state. Short press [ ] to increase the number, short press [ ] to decrease the number.
3.  Short press [ ] again in the clock display area, the Alarm 2 [ l icon and the clock will flash at the same time, entering the Alarm 2 clock setting state. The setting method for Alarm 2 is the same as Alarm 1.
4.  Long press [ ] to save the current settings and return to the time display.

Turn on/off the alarm

Long press [ ] to turn on or off Alarm 1/Alarm 2

snooze
When the alarm rings, short press [ ] to snooze The snooze duration is 5 minutes. You can snooze 4 times. When the alarm clock enters the snooze state, the alarm icon ****is on The screen display area flashes. The snooze is not over yet, press and hold the night light switch.[ will cancel the snooze state.

HOW TO USE WIRELESS SPEAKERS

Short press the switch [ ], there will be a beep, the Bluetooth function is turned on, and it is ready for pairing. At this time, turn on the Bluetooth function of your mobile phone and search for the Bluetooth speaker in the Bluetooth device. The word “S09” appears, click to select the “S09” device name; automatically enter pairing, pairing After the connection is successful, there will be a prompt sound. Short press [ ] again to turn off Bluetooth.

When the speaker is playing

1. Short press [ ] to play/pause
2. Short press [ ] to reduce the volume, and long press [ ]switch to the previous song.
3.  Short press [ ] to increase the volume, long press | ] to switch to the next song.

HOW TO USE THE RADIO

Short press the switch [ ], there will be a prompt sound, and the radio function is turned on; when using it, first long Press[ ]to automatically search surrounding channels and add stations; Then short press the switch [ , the radio function exits.

When the radio is playing

1.  Short press [ ] to play/pause, long press | ] to automatically search for radio stations.
2. Short press[ ]to switch to the previous channel; Long press| ]to reduce the volume .
3. Short press| Ito switch to the next channel; Long press[ ]to increase the volume.

ADJUST SCREEN BRIGHTNESS

In normal clock display mode
Short press [ ] to adjust the clock screen brightness. High Brightness – Medium Brightness – Low Brightness – Off to adjust the screen brightness in turn.

APPLICABLE DEVICE

This product supports fast wireless charging, which complies with the QI wireless charging standard; it realizes short-distance wireless power transmission through magnetic induction. This device supports all wireless charging devices that meet the QI standard. When using a 5V output adapter, Wireless charging supports 5W load. When using an adapter that meets QC2.0 and above standards, the wireless charging supports 10W load; Support overcharge protection (9V) and overcurrent protection (2A).

ATTENTION POINTS

• Do not use or store the product in direct sunlight or high temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product.
• Do not touch the AC adapter with wet hands.
• Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.
• Product working environment temperature range: -20~45°C.

WIRELESS CHARGING SPECIFICATIONS

• Material : Imported ABS + PP +
• Hardware Input :DC9V/2.1A
• Charging efficiency :75%
• Battery capacity :1800mAh
• Power :5W/7.5W/10W/15W|
• Headphone output power : 2.5W|
• Watch output power : 2.5W|
• Product size : 189x213x75mm
• Charging port : Universal Type-C

SPEAKER SPECIFICATIONS

• Bluetooth version :5.1
• Bluetooth distance :10m
• Speaker power :405W X2
• Speaker specifications :50mm

FCC Warning

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.

Any Changes or modifications not expressly approved by FCC RF Radiation Exposure Statement: the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

1.  This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2.  This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>