tuya BKL1566 RGBIC LED Strip User Guide
- June 16, 2024
- Tuya
Table of Contents
BKL1566 RGBIC LED Strip
User Guide
BKL1566 RGBIC LED Strip
https://smartapp.tuya.com/tuyasmart
Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
- The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
- Do not install the light on a damp or conductive subsurface.
- Please make sure that no cables get damaged during the installation work.
- The product has the protection class “IP20“ and is exclusively intended for use in the interior areas of private households.
- Do not look directly into the light source (illuminant, LED, etc.).
- LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LED’s can also change as a result of life span level from the lamp.
- This article is not suitable for use with dimmable electric circuits. a). It can be controlled using the button / switch “A / B / C“ on the article. “A” → Switch on and off / “B” → Select lighting effects / “C” → Select sound effects b). It can be controlled using a smartphone with WiFi /Wlan connection.
- The relevant app: “Tuya Smart / Smart Life“ is available for this purpose. This can be downloaded for Apple products in the App Store and for Android products in the Play Store. As a first-time user, you must register and create a new account. If you already have an account, log in with your access data The article must be in learning mode in order to register the article in the “Tuya Smart / Smart Life“ App. The long press “ ≥ 10sec. ” of the “A” button starts the teach-in mode. Alternative: The learning procedure for WiFi modules connected by plug connectors between transformer and lighting fixture is started (before the module) by “3x“disconnecting the plug connector several times. This applies only for versions without a cord switch. The learning mode is indicated by continual blinking of the article.
- After registration of the article in the “Tuya Smart / Smart Life“ App the article is then controllable and ready for operation using compatible speech controlled systems“(Amazon Alexa / Google Home)“. The skill required for “(Amazon Alexa / Google Home)“with the “Tuya Smart / Smart Life“ designation then needs to be activated in the App.
- This LED product may only be operated with the enclosed power supply unit or control gear.
- Do not attempt to switch on the adaptable light tape whilst it is rolled up or still in its packaging.
- The flexible LED tape can be shortened with a scissor every “20“ cm at the marked positions. The remaining section cannot be electrically connected again after shortening and can therefore no longer be used. To mount the LED tape, pull off the rear protection film and press firmly over the complete length at the envisaged location. Make sure that the mounting location is clean, dry and grease-free. Please observe that only the protective film on the double-sided tape is removed before applying the LED strip.
- No chemical cleaners such as glass cleaners are to be used on the surfaces, otherwise a firm join or adhesion cannot be guaranteed.
- This product works with an operating frequency of “2,4 GHz” and a transmission power of “max. 16 dBm”.
EU declaration of conformity
Product: BKL1565 BKL1566
B.K.Licht GmbH & Co. KG
Herzog-Johann-Strasse 4a
The manufacturer bears sole responsibility for issuing this declaration of
conformity
Fixed general purpose luminaires
Richtlinien
2014/53EU| Directive Directive
EN IEC 55015:2019 EN61547:2009
EN61000-3-3:2013+41:2019
EN301 489-17 V3.2.4:2020| EN62479:2010 EN IEC 61000-3-2:2019
EN301 489-1 V2.2.3:2019
EN300 328 V2.2.2:2019
---|---|---
2014/35EU| EN60598-1 :2015+A 1 :2018
EN61347-1:2015
EN62471 :2008| EN60598-2-1:1989
EN62031 :2008+A2:2015
EN61347-2-11:2001
EN62493:2015
EN61347-2-13:2014+A1:2017
2009/125/EG Verordnung – regulation – regalement 2019/2020
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment
Regulation : EN IEC 63000.2018
Signed for and on behalf of