BOSCH AdvancedShear 18V-10 Extension Pole Cordless Grass Shears Instruction Manual
- June 16, 2024
- Bosch
Table of Contents
- AdvancedShear 18V-10 Extension Pole Cordless Grass Shears
- Product Information
- Specifications
- Introduction
- Assembly
- Attachment
- Usage
- Q: Can the AdvancedShear 18V-10 Extension Pole be used with
- Q: Can the extension pole be adjusted to different
- Q: Is the AdvancedShear 18V-10 Extension Pole waterproof?
AdvancedShear 18V-10 Extension Pole Cordless Grass Shears
Product Information
Product Name: AdvancedShear 18V-10 Extension Pole
Manufacturer: Robert Bosch Power Tools GmbH
Country of Origin: Germany
Website: www.bosch-pt.com
Specifications
-
Model Number: F 016 L94 531
-
Article Number: F 016 800 608
-
Compliance: EU Declaration of Conformity
-
Standards: EN 62841-1:2015, EN 62841-4-2:2019, EN
50636-2-94:2014, EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC
63000:2018 -
Compatible with: AdvancedShear 18V-10
Product Usage Instructions
Introduction
The AdvancedShear 18V-10 Extension Pole is designed to extend
the reach of the AdvancedShear 18V-10 for easier trimming and
cutting of hard-to-reach areas. This user manual provides detailed
instructions on how to assemble, attach, and use the extension pole
correctly.
Assembly
-
Remove the AdvancedShear 18V-10 from its original handle.
-
Align the screw holes on the extension pole with the
corresponding holes on the AdvancedShear 18V-10. -
Insert the screws provided into the holes and tighten them
securely using a screwdriver.
Attachment
-
Hold the extension pole firmly with one hand.
-
Align the attachment point on the AdvancedShear 18V-10 with the
connector on the extension pole. -
Slide the AdvancedShear 18V-10 onto the connector until it
clicks into place. -
Ensure that the attachment is secure by gently pulling on the
AdvancedShear 18V-10.
Usage
Before using the AdvancedShear 18V-10 Extension Pole, make sure
to read and understand the user manual of the AdvancedShear 18V-10.
The following steps outline the basic usage of the extension
pole:
-
Hold the extension pole with both hands, firmly gripping the
handle. -
Position the AdvancedShear 18V-10 at the desired cutting or
trimming area. -
Apply pressure and activate the cutting or trimming mechanism
of the AdvancedShear 18V-10 as instructed in its user manual. -
Move the extension pole along the area, maintaining a steady
and controlled motion. -
Adjust the length of the extension pole as needed to reach
different areas.
Frequently Asked Questions (FAQ)
Q: Can the AdvancedShear 18V-10 Extension Pole be used with
other tools?
A: No, the AdvancedShear 18V-10 Extension Pole is specifically
designed for use with the AdvancedShear 18V-10 and may not be
compatible with other tools.
Q: Can the extension pole be adjusted to different
lengths?
A: Yes, the extension pole can be adjusted to different lengths
to provide flexibility in reaching various cutting and trimming
areas.
Q: Is the AdvancedShear 18V-10 Extension Pole waterproof?
A: No, the extension pole is not waterproof. It should not be
used in wet or rainy conditions.
Robert Bosch Power Tools GmbH 70538 Stuttgart GERMANY www.bosch-pt.com
F 016 L94 531 (2022.12) O / 7
F 016 L94 531
AdvancedShear 18V-10 Extension Pole
de Originalbetriebsanleitung en Original instructions fr Notice originale es Manual original pt Manual original it Istruzioni originali nl Oorspronkelijke gebruiksaanwijzing da Original brugsanvisning sv Bruksanvisning i original no Original driftsinstruks fi Alkuperäiset ohjeet el tr Orijinal iletme talimati
pl Instrukcja oryginalna cs Pvodní návod k pouzívání sk Pôvodný návod na
pouzitie hu Eredeti használati utasítás ru
uk
kk
ro Instruciuni originale bg mk
sr Originalno uputstvo za rad sl Izvirna navodila hr Originalne upute za rad et Algupärane kasutusjuhend lv Instrukcijas oriinlvalod lt Originali instrukcija ar fa
2 |
Licenses
Copyright © 20122020 STMicroelectronics All rights reserved. Redistribution
and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclai-
mer in the documentation and/or other materials provided with the
distribution. Neither the name of STMicroelectronics nor the names of its
contributors may be used to endorse or promote products de-
rived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright © 20092020 ARM LIMITED All rights reserved. Redistribution and use
in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclai-
mer in the documentation and/or other materials provided with the
distribution. Neither the name of ARM nor the names of its contributors may
be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
F 016 L94 531 | (06.12.2022)
Bosch Power Tools
de EU-Konformitätserklärung
Teleskopstiel
Sachnummer
en EU Declaration of Conformity
Extension Pole
Article number
fr Déclaration de conformité UE
Tige de rallonge
N° d’article
es Declaracion de conformidad UE Barra de prolongación Nº de artículo
pt Declaração de Conformidade UE Haste de extensão N.° do produto
it Dichiarazione di conformita UE
Asta di prolunga
Codice prodotto
nl EU-conformiteitsverklaring
Verlengstang
Productnummer
da EU-overensstemmelseserklæring
Forlængerstav
Typenummer
sv EU-konformitetsförklaring Förlängningsstav Produktnummer
no EU-samsvarserklæring Teleskopforlengelse Produktnummer
fi EU-vaatimustenmukaisuusvakuutus
Pidennystanko
Tuotenumero
el
tr AB Uygunluk beyani
Uzatma çubuu
Ürün kodu
pl Deklaracja zgodnoci UE
Przedluka
Numer katalogowy
cs EU prohlásení oshod
Prodluzovací tyc
Objednací císlo
I
Wir erklären in alleiniger Verantwortung, dass die genannten Produkte allen
einschlägigen Bestimmungen der nachfolgend aufgeführten Richtlinien und
Verordnungen entsprechen und mit folgenden Normen übereinstimmen.
We declare under our sole responsibility that the stated products comply with
all applicable provisions of the directives and regulations listed below and
are in conformity with the following standards.
Nous déclarons sous notre propre responsabilité que les produits décrits sont
en conformité avec les directives, règlements normatifs et normes énumérés ci-
dessous.
Declaramos bajo nuestra exclusiva responsabilidad, que los productos nombrados
cumplen con todas las disposiciones correspondientes de las Directivas y los
Reglamentos mencionados a continuación y están en conformidad con las
siguientes normas.
Declaramos sob nossa exclusiva responsabilidade que os produtos mencionados
cumprem todas as disposições e os regulamentos indicados e estão em
conformidade com as seguintes normas.
Dichiariamo sotto la nostra piena responsabilita che i prodotti indicati sono
conformi a tutte le disposizioni pertinenti delle Direttive e dei Regolamenti
elencati di seguito, nonche alle seguenti Normative.
Wij verklaren op eigen verantwoordelijkheid dat de genoemde producten voldoen
aan alle desbetreffende bepalingen van de hierna genoemde richtlijnen en
verordeningen en overeenstemmen met de volgende normen.
Vi erklærer som eneansvarlige, at det beskrevne produkt er i overensstemmelse
med alle gældende bestemmelser i følgende direktiver og forordninger og
opfylder følgende standarder.
Vi förklarar under eget ansvar att de nämnda produkterna uppfyller kraven i
alla gällande bestämmelser i de nedan angivna direktiven och förordningarnas
och att de stämmer överens med följande normer.
Vi erklærer under eneansvar at de nevnte produktene er i overensstemmelse med
alle relevante bestemmelser i direktivene og forordningene nedenfor og med
følgende standarder.
Vakuutamme täten, että mainitut tuotteet vastaavat kaikkia seuraavien
direktiivien ja asetusten asiaankuuluvia vaatimuksia ja ovat seuraavien
standardien vaatimusten mukaisia.
, .
Tek sorumlu olarak, tanimlanan ürünün aaidaki yönetmelik ve direktiflerin
geçerli bütün hükümlerine ve aaidaki standartlara uygun olduunu beyan ederiz.
Owiadczamy z peln odpowiedzialnoci, e niniejsze produkty odpowiadaj wszystkim
wymaganiom poniej wyszczególnionych dyrektyw i rozporzdze, oraz e s zgodne z
nastpujcymi normami.
Prohlasujeme na výhradní zodpovdnost, ze uvedený výrobek spluje vsechna
píslusná ustanovení níze uvedených smrnic anaízení aje vsouladu snásledujícími
normami:*
Bosch Power Tools
F 016 L94 531 | (06.12.2022)
II
sk EÚ vyhlásenie ozhode
Predlzovacia tyc
Vecné císlo
Vyhlasujeme na výhradnú zodpovednos, ze uvedený výrobok spa vsetky príslusné ustanovenia nizsie uvedených smerníc anariadení aje vsúlade snasledujúcimi normami:
hu EU konformitási nyilatkozat
Hosszabbító rúd
Cikkszám
Egyedüli felelséggel kijelentjük, hogy a megnevezett termékek megfelelnek az alábbiakban felsorolásra kerül irányelvek és rendeletek valamennyi idevágó elírásainak és megfelelnek a következ szabványoknak.
ru
, , .
uk
, , .
kk
.
ro Declaraie de conformitate UE
Declarm pe proprie rspundere c produsele menionate
Tij prelungitoare
Numr de identificare corespund tuturor dispoziiilor relevante ale directivelor i reglementrilor enumerate în cele ce urmeaz i sunt în
conformitate cu urmtoarele standarde.
bg
, – .
mk EU- /
, .
sr EU-izjava o usaglasenosti
Produzna sipka
Broj predmeta
Na sopstvenu odgovornost izjavljujemo, da navedeni proizvodi odgovaraju svim doticnim odredbama naknadno navedenih smernica u uredaba i da su u skladu sa sledeim standardima.
sl Izjava o skladnosti EU Podaljsevalna palica Stevilka artikla
Izjavljamo pod izkljucno odgovornostjo, da je omenjen izdelek v skladu z vsemi relevantnimi dolocili direktiv in uredb ter ustreza naslednjim standardom.
hr EU izjava o sukladnosti
Produzna sipka
Kataloski br.
Pod punom odgovornosu izjavljujemo da navedeni proizvodi odgovaraju svim relevantnim odredbama direktiva i propisima navedenima u nastavku i da su sukladni sa sljedeim normama.
et EL-vastavusdeklaratsioon
Pikendusvars
Tootenumber
Kinnitame ainuvastutajatena, et nimetatud tooted vastavad järgnevalt loetletud direktiivide ja määruste kõikidele asjaomastele nõuetele ja on kooskõlas järgmiste normidega.
lv Deklarcija par atbilstbu ES standartiem
Ms ar pilnu atbildbu paziojam, ka seit aplkotie izstrdjumi
Pagarinjuma kts Izstrdjuma numurs atbilst visiem tlk mintajs direktvs un rkojumos ietvertajm saistosajm nostdnm, k ar sekojosiem standartiem.
lt ES atitikties deklaracija Ilginamasis kotas Gaminio numeris
Atsakingai pareiskiame, kad isvardyti gaminiai atitinka visus privalomus zemiau nurodyt direktyv ir reglament reikalavimus ir siuos standartus.
AdvancedShear 18V-10 Extension Pole
F 016 800 608
F 016 L94 531 | (06.12.2022)
2014/30/EU 2011/65/EU
EN 62841-1:2015 EN 62841-4-2:2019 EN 50636-2-94:2014 EN IEC 55014-1:2021 EN IEC 55014-2:2021 EN IEC 63000:2018
Bosch Power Tools
III
- Robert Bosch Power Tools GmbH, PT/ECS, 70538 Stuttgart, GERMANY
Henk Becker Chairman of Executive Management
Helmut Heinzelmann Head of Product Certification
Robert Bosch Power Tools GmbH, 70538 Stuttgart, GERMANY Stuttgart, 06.12.2022
Bosch Power Tools
F 016 L94 531 | (06.12.2022)
IV
F 016 L94 531 | (06.12.2022)
Bosch Power Tools
i Declaration of Conformity
Grass & Shrub Shear
AdvancedShear 18V-10 Extension Pole
Article number F 016 800 608
We declare under our sole responsibility that the stated products comply with
all applicable provisions of the regulations listed below and are in
conformity with the following standards.
Technical file at: Robert Bosch Ltd. (PT/SOP-GB), Broadwater Park, North
Orbital Road, Uxbridge UB9 5HJ, United Kingdom
The Electromagnetic Compatibility Regulations 2016 The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012
EN 62841-1:2015 EN 62841-4-2:2019 EN 50636-2-94:2014 EN IEC 55014-1:2021 EN
IEC 55014-2:2021 EN IEC 63000:2018
Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany represented (in terms
of the above regulations) by Robert Bosch Limited, Broadwater Park, North
Orbital Road, Uxbridge UB9 5HJ, United Kingdom
Vonjy Rajakoba Managing Director – Bosch UK
Martin Sibley Head of Sales Operations and Aftersales
Robert Bosch Ltd. Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom, as authorised representative acting on behalf of Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany
Place of issue: Uxbridge
Date of issue: 06/12/2022
Bosch Power Tools
F 016 L94 531 | (06.12.2022)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>