Shark HD400 Hairdryer Multistyler Instruction Manual

: June 16, 2024
: Shark

Table of Contents

Shark HD400 Hairdryer Multistyler
Product Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
TROUBLESHOOTING & ERROR CODES
WARRANTY
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark HD400 Hairdryer Multistyler

Specifications

Voltage: 120V~, 60Hz
Power: 1300 Watts

Product Usage Instructions

Safety Precautions

When using electrical appliances, especially when children are present, basic safety precautions should always be followed.
Read all instructions before using the product and save them for future reference.
Keep the product away from water.
The electrical parts of the product may still be live even when the switch is off.
To reduce the risk of electric shock, always unplug the unit immediately after use.
Do not use the product while bathing.
Avoid placing or storing the appliance where it can fall or be pulled into a tub or sink.
Do not place or drop the appliance into water or other liquid.
If the appliance falls into water, unplug it immediately and do not reach into the water.
Always supervise the appliance when in use, especially when used by or near children or individuals with certain disabilities.
Use the product only for its intended purpose as described in the manual and do not use attachments not recommended by the manufacturer.
Never operate the appliance if it has a damaged cord or plug, is not working properly, or has been dropped into water.
Keep the cord away from heated surfaces and avoid wrapping it around the appliance.
Never block the air openings of the appliance.

Operating Instructions

Turn the styler on and off.
Adjust the airflow by pressing the button to choose low, medium, or high airflow.
Adjust the temperature by pressing the button to choose no heat, low, medium, or high temperature.
Press and hold the Cool Shot button for a cool burst of air to set your style.
To attach any included accessories, press them into the nozzle outlet until they click in place.
To remove accessories, slide the lock down and lift the accessory off the nozzle using the touchpoints identified in your Style Guide.
To change from styling wand mode to hair dryer mode, slide down the lock and rotate the nozzle left until it clicks into place. To change from hair dryer mode to styling wand mode, slide down the lock and rotate the nozzle right.
Press the ALCI button to reset the dryer (refer to Troubleshooting & Error Codes for more information).
For further operating instructions, consult the Styling Guide or scan the QR code provided.

Storage, Cord Safety, and Maintenance/Cleaning

Follow these guidelines for storage, cord safety, and maintenance/cleaning:

Ensure the product is turned off and unplugged before storing.
Avoid bending or damaging the cord. Store it in a safe and dry place.
Clean the product regularly according to the maintenance instructions provided in the manual.

Shark HD400 Hairdryer Multistyler

Overheating

If the hair dryer is overheating or shuts off, it may be due to a change in airflow or air power, or airflow blockages.

FAQ

Q: Where can I find accessories and replacement parts?

A: You can visit sharkclean.com/accessories for accessories and replacement parts.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

FOR HOUSEHOLD USE ONLY

READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS

WARNINGS: KEEP AWAY FROM WATER

DANGER

As with most electrical appliances, electrical parts are electrically live even when the switch is off.

WARNING

To reduce the risk of death by electric shock:

Always unplug the unit immediately after using it.
Do not use it while bathing.
Do not place or store appliances where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
If an appliance falls into the water, unplug the unit immediately. Do not reach into the water.

WARNING

To reduce the risk of burns, electrocution, fire, or injury to persons:

A n appliance should never be left unattended when plugged in.
Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water.
Keep the cord away from heated surfaces.
Do not wrap the cord around the appliance.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
Never use while sleeping.
Never drop or insert any object into any opening.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
Do not direct hot air toward eyes or other heat-sensitive areas.
Attachments may be hot during use. Allow them to cool before handling.
Do not place appliance on any surface while it is operating.
While using the appliance, keep your hair away from the air inlets.
Do not operate with a voltage converter.

For accessories and replacement parts,

visit sharkclean.com/accessories

TECHNICAL SPECIFICATIONS

Voltage: 120V~, 60Hz |
Power: 1300 Watts

SCAN QR CODE FOR FULL INSTRUCTIONS, WARRANTY INFORMATION, AND HOW-TOS

OPERATING INSTRUCTIONS

Turn the styler on and off.
Adjust the airﬂow. Pressing the button allows you to choose a low, medium, or high airﬂow.
Adjust the temperature. Pressing the button allows you to choose no heat, low, medium or high temperature.
Press and hold the Cool Shot button for a cool burst of air to set your style.
To attach any accessories included with your model, press them into the nozzle outlet. You will know they are properly attached when they click in place.
To remove any accessories included in your model, slide the lock down and lift the accessory off of the nozzle by holding onto the touchpoints identiﬁed in your Style Guide.
To change from styling wand mode to hair dryer mode, slide down the lock and rotate the nozzle left. Keep rotating the nozzle until it clicks into place in hair dryer mode. To change from hair dryer mode to styling wand mode, slide down the lock and rotate the nozzle right.
Press the ALCI button to rest the dryer. See Troubleshooting & Error Codes for more information.

For further operating instructions, please consult the Styling Guide or scan the QR code.

Storage, Cord Safety, and Maintenance/Cleaning:

Ensure the cord is not knotted, twisted, or wrapped around any nearby objects when in use.
Store the unit in a dry location away from water and other heat sources.
Regularly clean the ﬁler at the bottom of the unit. To clean the ﬁlter, ﬁrst slide the ﬁlter cover off the bottom of the unit. Then use a new toothbrush to brush off any dust or debris on the ﬁlter. Once the ﬁlter is clean, slide the ﬁlter cover back on the unit until it clicks in place.

TROUBLESHOOTING & ERROR CODES

MAINTENANCE/CLEANING
- Reduction in Airflow or Overheating A change in airﬂow or air power, airﬂow blockages, and/or visible buildup on the inlet at the bottom of the unit indicates your unit needs to be cleaned. We recommend using a new toothbrush to clean off the ﬁlter at the bottom of the unit.
ALCI OPERATION
- Electricity flickers or trips circuit breaker during use. This dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that renders it inoperable under abnormal conditions. Should the dryer turn off in use, press the red Reset button on the plug and the dryer should function normally. If the dryer does not reset, please check your circuit breaker. If the issue persists, ensure there are no other appliances plugged in within the room where the dryer is being used. Do not use the dryer with a power strip.

OVERHEATING

The hair dryer is overheating or shuts off.
- This unit is equipped with a temperature-protective thermostat. If for some reason your hair dryer overheats, the thermostat will automatically turn the unit off. To prevent a power-down recurrence, unplug the hair dryer and set it aside to cool, or cool down using the cool shot button during use. Overheating may result if the unit is powered on for a long duration, or can indicate a blockage or dust buildup. We recommend using a new toothbrush to clean off the ﬁlter at the bottom of the unit. If overheating continues to occur, contact Customer Service at
- 855-522-0912.

If you are experiencing a different error code, please scan the QR code for additional troubleshooting or contact Customer Service at 855-522-0912.

WARRANTY

TWO (2) YEAR LIMITED WARRANTY

The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to two (2) years from the original purchase date.
2. I n the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as accessories), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkclean.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service
- If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkbeauty.com for product care and maintenance self-help. Our Customer Service Specialists are also available at 855-522-0912 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
- You must call 855-522-0912 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourshark. com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.
How state law applies
- This warranty gives you speciﬁc legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

FCC Statement

This unit has been tested and found to comply with FCC limits for Class B digital devices. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this unit may not cause harmful interference, and this unit must accept any interference received, including interference that may cause undesired operation. To see if this unit interferes with radio or television reception, try turning it off and on.

To correct any interference:

Reorient or relocate the receiving antenna.
Increase the distance between the unit and the receiver.
Connect the unit to a different outlet than the receiver.
Consult the dealer or an experienced technician for help.

Caution: Any changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate it.