SALTO Systems S L XS4 Original+ For DIN Fastening Holes Doors Installation Guide
- June 16, 2024
- SALTO Systems S L
Table of Contents
SALTO Systems S L XS4 Original+ For DIN Fastening Holes Doors
Product Information
Specifications
- Product: XS4 Original+ for DIN fastening holes doors
- Series: E i 4xx.. series, E i 4xx..E5 series
- IP Rating: IP54, IP44, IP56, IP44
- Fastening Types: ALLEN 4 (x4), TORX 20 (x2), ALLEN 3 (x2), BOLT (Depending on door thickness)
- Door Thickness Range:
- 3mm – 32-47mm (35mm)
- 4mm – 45-60mm (50mm)
- 6mm – 60-75mm (30mm)
- 7mm – 75-90mm (45mm)
- 9mm – 90-105mm (30mm)
- 10mm – 105-120mm (45mm)
- Max. Torque: 4Nm
Product Usage Instructions
Installation
- Select the appropriate hand orientation.
- Follow the installation instructions for the chosen hand orientation.
- For DIN 18250 fixing ROSE set type lock:
- Drill holes in the door according to the specified measurements.
- For DIN 18250 fixing SHORT Plate set type lock:
- Drill holes in the door according to the specified measurements.
- Do not close the door at this point. Program the lock first by following the user manual.
Battery Change
- Replace the batteries with LR03 type batteries.
- Ensure the batteries are properly inserted and have a maximum voltage of 40.
FAQ
Q: Can I use this product for doors with a thickness greater than 60mm?
A : Yes, this product can be used for doors with a thickness greater than
60mm. Please refer to the specific instructions marked with (*) in the manual.
Installation guide
XS4 Original+ for DIN fastening holes doors
Installation guide
Mortise Lock not included
Only for door thickness > (60mm).
SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn.
Select handing
Installation
Door drilling for DIN 18250 fixing ROSE set type lock.
Door drilling for DIN 18250 fixing SHORT Plate set type lock.
Battery change
XS4 Original+ for DIN fastening holes doors
Mortise Lock not included
Only for door thickness > (60mm).
SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn.
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item in
this catalog, its design, construction, and/or materials.