BRESSER 73032 Pirsch 8×26 Premium Binoculars Instruction Manual
- June 4, 2024
- BRESSER
Table of Contents
BRESSER 73032 Pirsch 8×26 Premium Binoculars
General Safety Informations
RISK of physical injury!
Never look through this device directly at or near the sun. There is a risk of
BLINDING YOURSELF!
Children should only use this device under supervision. Keep packaging
materials (plastic bags, rubber bands, etc.) away from children. There is a
risk of SUFFOCATION.
Fire/Burning RISK!
Never subject the device – especially the lenses – to direct sunlight. Light
ray concentration can cause fires and/or burns.
RISK of material damage!
Never take the device apart. Please consult your dealer if there are any
defects. The dealer will contact our service center and send the device in for
repair if needed.
Do not subject the device to temperatures exceeding 60° C!
List of Parts
- Centre axle
- Twist-up eyecups or
- Rubber eyecups
- Dioptre adjustment
- Body of the binoculars
- Lens tube
- Central focusing wheel
- Eyepiece
- Objective lens
- mage circle with correctly set eye distance
Eyepieces for spectacle wearers
Depending on the model, your binoculars are equipped with either twist-up eye- cups (2a) or rubber eyecups (2b). Since there is a larger distance between the binocular eyepiece and the pupil for those wearing glasses, both eyecup varieties can be adjusted individually.
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use the binoculars while wearing
glasses. If you are not wearing glasses, unscrew the eyecups to achieve the
required distance from the pupils.
OR
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn the rubber eyecups (2b)
to-wards the sides and down. If you are not wearing glasses, leave the eyecups
in the upright position to achieve the required distance from the pupils.
Adjusting the eyepiece distance
The distance between the eyes differs between individuals. To achieve perfect interaction between your eyes and the eyepieces of your binoculars set the angle at the center of the binoculars (1) so that you see a circular image (12). Note this setting for later use.
Adjusting the focus
Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the center wheel (6) until it is sharp and clear. Close your left eye and adjust the image for your right eye using the dioptre ring (3) until it too is sharp and clear.
TIPS on cleaning
Lenses (eyepieces and object lenses) should be cleaned with a soft, lint-free cloth (e.g. microfibre) only. Do not use excessive pressure – this may scratch the lens.
Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses. Protect the device against dirt and dust. Leave it to dry properly after use at room temperature. Then put the dust caps on and store the device in the case provided.
Warranty & Service
The regular guarantee period is 2 years and begins on the day of purchase. To
benefit from an extended voluntary guarantee period as stated on the gift box,
registration on our website is required.
You can consult the full guarantee terms as well as information on extending
the guarantee period and details of our services at
www.bresser.de/warranty_terms.
Errors and technical changes are reserved.
Bresser GmbH
Gutenbergstr. 2 DE-46414 Rhede Germany
www.bresser.de.
service@bresser.de.
Service Hotline:
+49 (0) 28 72-80 74-210
Bresser France SARL
Parc d’activités de Nicopolis 260, rue des Romarins 83170 Brignoles · France
www.bresser.fr.
info@bresser.fr.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>