SZFEIC KE11 All Metal Keychain Flashlight Instruction Manual
- June 16, 2024
- SZFEIC
Table of Contents
SZFEIC KE11 All Metal Keychain Flashlight Instruction Manual
Product Overview
- Use two 3030 white LED lamp beads with a lifespan of 50,000 hours.
- Built-in 300mAh lithium polymer battery.
- Power indicator and low voltage warning function.
- Made of metal aluminum, CNC machined body.
- The surface adopts three-level hard oxidation treatment process.
- The lens adopts TIR lens.
- Size: 562713mm.
- Net weight: 33g.
Operation instruction
On/Of
- Press and hold the switch button for 1 s to turn on/off the flashlight.
Mode switch
- Press and hold for 1s to turn on the light, single click the switch button to switch through moonlight-low-Med high brightness cycle in turn.
Low voltage indication
If the battery voltage is too low, it will gradually reduce the current working gear until the moonlight blocks. If the energy-saving gear still detects that the voltage is too low, the lighted indicator will automatically flash to remind you to charge, so as to avoid shortening or damage to the battery life, and at the same time, in order to ensure the normal use of the user, the flashlight will not automatically shut down, and will keep prompting until the battery is exhausted.
Technical parameters
| ANIS/PLATO FL1 | High | Mid | Low | Moon |
|---|---|---|---|---|
| OUTPUT | 260lumens | 100lumens | 50lumens | 20lumens |
| RUNTIME | 30min | 60min | 80min | 160min |
| IMPACT RESISTANCE | 1.5 meters | |||
| WATER PROOF | IPX6 |
Please note: The above parameter experiments are only approximations, and
are tested in the SZFEIC laboratory under the conditions of temperature 21±3°C
and humidity 50%-80%. Actual performance will follows up the actual usage
environment.
“The battery high brightness gear lasts time is cumulative time.
Charging instructions
- Turn off the flashlight, then uncover the anti-water cape, plug the USB Type-C side of the charging cable into the charging port of the flashlight.
- After the flashlight receives the charging signal, the red light of the battery indicator will flash. After the flashlight is fully charged, the battery indicator light keeps green.
- After fully charged, unplug the charging cable, put the waterproof cap back and press it tightly to maintain the waterproof performance of the flashlight, and then the flashlight can be used normally.
Battery level indication
When the flashlight is switched off, single click either of the switches to
check the battery status , the indicator will last for 3 s.
Red lights on (Indicates low battery): < 30%
Green lights flash (Indicates power range): 30%-70%
Green lights on (Indicates sufficient power): 70%-100%
Usage and maintenance
If the battery power is too low, please fully charge it in time to ensure normal use next time. Please charge the battery once every 5 months to effectively protect the battery and prolong its service life. After charging is finished, set the anti-water cap back on tightly to prevent water or dust/debris from entering.
Packing list
- 1*KE11 flashlight
- 1*Key chain
- 1*USB Type-C Charging Cable
- 1*User manual
- 1*Warranty card
Warning
The brightness of this product is high, please do not look directly at the
luminous body,so as not to cause visual damage.
All information provided in this manual is subject to change without notice.
WEB
“Follow” us for more information about SZFEIC.
Shenzhen Feichi Maker Co., Ltd
Site: www.szfeic.com
Address: 115 Yulong Hua Ting, Longtang Community,
Minzhi Street, Longhua District, Shenzhen City,
Guangdong Province, China
260 LUMENS MAXIMUM OUTPUT
3 HOURS MAXIMUM RUNTIME
Symbols
Documents / Resources
|
SZFEIC KE11 All Metal Keychain
Flashlight
[pdf] Instruction Manual
KE11, KE11 All Metal Keychain Flashlight, All Metal Keychain Flashlight, Metal
Keychain Flashlight, Keychain Flashlight, Flashlight
---|---