vellight CHLSC4 RGB Controller Instruction Manual
- June 5, 2024
- vellight
Table of Contents
vellight CHLSC4 RGB Controller
WARNING
- Connect red cable to + of 5-24 VDC power supply; black cable to – of power supply.
INSTALLATION INSTRUCTIONS
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment. Do not dispose of the unit (or
batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling. This device should be returned to your distributor or
to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Vellight! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don’t
install or use it and contact your dealer.
Installation
-
Connect the common anode LED strip to the controller output as shown in the picture.
Make sure the arrows on the strip and controller are aligned.
Make sure the cable is well insulated and there are no short circuits. -
Connect the cable end marked 5-24V to a DC power supply as shown in the picture.
Make sure the cable is well insulated and there are no short circuits. The DC power voltage must be equal to the rated voltage of the LED strip. -
Press any key to switch on.
Operation:
- MODE/DEMO key: switch to automatic mode.
- Press repeatedly to choose an automatic program.
- Press and hold for at least 1 second to switch to demo mode and play programs in a loop.
- SPEED/Brightness/Off key: adjust speed or brightness.
- In automatic mode, press to change speed.
- In static colour mode, press to change brightness.
- Press and hold for 1 second to switch off.
- In off mode, press any key to switch on and start the last selected mode.
- COLOR key: switch to static colour mode.
- In static colour mode, press repeatedly to choose a colour.
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the
electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in
the EU. In order to
ensure the quality, our products regularly go through an extra quality check,
both by an internal quality department and by specialized external
organisations. If, all precautionary measures notwithstanding, problems should
occur, please make appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU)
- All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
- Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
- Not covered by warranty:
- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written
permission by Velleman®.
- Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
- Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
- Repairs occurring after warranty expiration are subject to shipping costs.
- The above conditions are without prejudice to all commercial warranties.
The above enumeration is subject to modification according to the article (see article’s manual).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>