FeiyuTech SCORP Mini P Professional Gimbal User Guide

FeiyuTech SCORP Mini P Professional Gimbal

Overview

* Not include smartphone.

[1] Power button
[2] Trigger button
[3] F2 button
[4] Shutter button
[5] Joystick
[6] Mode button
[7] R button
[8] Auto rotation button
[9] L button
[10] F1 button
[11] Knob function switching button
[12] FPV but
[13] Handle
[14] Multifunction knob
[15] Smartphone holder
[16] Cross arm
[17] Roll axis
[18] Roll lock
[19] Tilt axis
[20] Tilt lock
[21] Cross arm
[22] Pan axis
[23] Pan lock

User manual
Scan the QR code to get the latest user manual or download it from the official website.
https://www.feiyu-tech.com/feiyu-scorp-mini-p/

Download the App
Scan the QR code to download the app, or search for “Feiyu ON”in the App Store or Google Play.

• Requires iOS 9.0 or above, Android 6.0 or above.

Getting started

Charging

Please fully charge the battery before power on the gimbal for the first time. Charging with USB-C cable, supports quick charge.

Adjust the gimbal to gimbal balancing position

The gimbal is folded by default, please unlock all the three axes and adjust the gimbal to gimbal balancing position, and then lock the three axes.

Mounting the Smartphone

Make sure you have completed all the steps which mentioned in “chapter 2. Getting started” and the gimbal is adjusted to gimbal balancing position. It is recommended to remove the smartphone case before mounting the smartphone.
Take horizontal mounting as an example:
(1) Power off the gimbal or enter sleep mode first, then rotate the smartphone holder to make it vertical to prepare for landscape shooting.
(2) Extend the smartphone holder, and put your smartphone in, keep the smartphone holder in center.
Note: before switching the mounting direction, the gimbal required to be off or in sleep mode.

Gimbal Balancing

Please balance the gimbal before powering it on. Before balance the gimbal, please power off it or enter sleep mode.

(1) Unlock the three axis locks ① , observe the tilt direction of the mobile phone. (2) If the phone is tilted to one end, it means that the center of gravity is toward this end, and the fixing knob needs to be loosened ② , and then move the cross arm in the opposite direction ③ , until the cross arm maintains a horizontal balance. (3) tighten the fixing knob ②。

Operation

Power ON/ OFF

Before power on the gimbal, make sure you have balanced gimbal, and unlocked all the three axes. If you haven’t unlocked all the 3 axes, gimbal will enter sleep mode to protect itself. Please single tap power button to wake up gimbal after unlocked all the 3 axes. Long press the power button and release it when you hear the beep sound to power on/ off.

Follow mode introduction EN

PF: Pan follow, only the pan axis follows the movement of user’s hand.
PTF: Pan and tilt follow, where both the pan and tilt axes follow the movement of user’s hand, but roll axis does not.
FPV: Pan, tilt and roll follow, where all 3 axes follow the movement of user’s hand.
Lock: All 3 axes do not follow the movement of user’s hand, gimbal keeps the direction of the camera fixed.
FFW: Flash follow, where all 3 axes follow the movement of user’s hand in high follow speed.

Button operation

Power button
Long press: Power on/off
Single tap: Wake up
Double tap : Enter sleep mode.

Mode button
Single tap: Switch among PF/PTF (Default)/FPV mode (Switch in turn)
Tap five times: Horizon calibration(Single tap to wake up after calibration completed)

Trigger button
Single tap: face tracking
Double tap : Recenter Triple tap: Enter/Exit selfie mode (Pan axis turn 180° )
Press and hold: PTF(Release to exit) You can custom the function via AP

Joystick
Push: Control the movement of the tilt and pan axes.

Shutter button
Press half way: Focus
Single tap (Fully): Start/Stop recording
Long press (Fully): Take photo Need to connect with smartphone

Auto rotation button
Single tap: Enter auto rotation mode
Single tap again:
(1) Exit auto rotation mode (When gimbal is not rotating)
(2) Pause the rotation (When gimbal is rotating)

L button
Single tap: Turn left continuously Single tap again: Switch rotating speed (Switch cyclically among Slow/ Med/Fast orderly, the preset speed is Med)
Active in auto rotation mode

R button
Single tap: Turn right continuously Single tap again: Switch rotating speed (Switch cyclically among Slow/Med/Fast orderly, the preset speed is Med)
Active in auto rotation mode

F1 button
Double tap : Enter/Exit portrait mode (in the Feiyu ON Ap

F2 button
Double tap : Enter FFW mode

FPV button
Single tap: Enter/Exit FPV mode

Multifunction knob
Turn: (1) Control the movement of the roll, tilt and pan axes.
(2) focus/electronic zoom Set current control option as option
(1) or (2) through knob function switching button or swipe up in home pag

Knob function switching button
Single tap:
(1) Switch the control object while controlling the movement of the 3 axes (Tilt/Pan/ Roll)
(2) When in electronic focus/zoom control state, single tap to switch between electronic focus and electronic zoom (Feiyu ON App)
Long press: Switch the control options of Multifunction knob in turn (The movement of the 3 axes/Electronic focus、electronic zoom)

– More button function introductions please refer to the user manual.

Indicator
[1] Battery indicator A/B/C
[2] Bluetooth indicator
[3] Follow status indicator
TILT = Tilt axis
ROLL= Roll aixs
PAN = Pan axis

The indicator is on which means the corresponding axis follows the movement of user’s hand.

Bluetooth indicator instruction

Bluetooth status|

Indicator

---|---
Bluetooth connected|
Bluetooth disconnected|
Unpairing Bluetooth*|

*Clear Bluetooth connection: push the joystick down and hold it, then triple tap the power button

Packing List

SCORP-Mini P ×1, Tripod ×1, USB-C cable ×1, Manual ×1

  Follow status indicator instruction

| Follow status indicator
---|---
Mode| TILT| ROLL| PAN
Lock| | |
PF| | |
PTF| | |
FPV| | |
FFW| | |
Auto rotation| | |
| | |

Battery indicator instruction

| Battery indicator
---|---
Battery level| A| B| C
Fully charged|

| |
High level of battery| | |
Medium level of battery| | |
Low power| | |
Low power, will auto power of| | |

Other status indicator instruction

| Battery indicator
---|---
Status| A| B| C
Sleep mode|
Initializing| | |
Initialization failed| | |
Upgrading| The green light flashes cyclically| |
Upgrade failed| The yellow light flashes cyclically| |

Icon:

Light of corresponding color is on
Blue light keeps flashing twice
Blue light flashes quickly
Yellow light flashes quickly
Red light flashes quickly
Green light flashes quickly
Green light breathing
Light is of

Specifications

88mm )

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

NOTE
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

References

• Feiyu Scorp Mini-P - Professional Gimbal - Feiyu Gimbal

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>