Motorola H680 Bluetooth Headset User Manual

Motorola H680 Bluetooth Headset

Universal Bluetooth® Headset H680

European Union Directives Conformance Statement

Hereby, Motorola Inc., declares that this H680 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola. com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren’t available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way. Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See-47 -CFR-Sec.-15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See-47-CFR Sec.-15.19(3).

Before you begin

See figure 1 on page 1.

Take a moment before you get started to familiarize yourself with your new H680 Bluetooth Hands-free Headset. Along with your headset, a charger case is provided for both charging and storage.

Bluetooth headset

• 1. Power button
• 2. Call button
• 3. Indicator light
• 4. Microphone
• 5. Charging contacts
• 6. Volume buttons
• 7. Speaker

Charger case

• 1. Charger port
• 2. Charging contacts
• 3. Charger cover

Wearing your headset

Seefigure 2 on page 2.

Your H680 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset’s earpiece speaker and placed onto your ear when using your headset. Your headset’s performance is greatly dependent upon achieving a good fi t on your ear. Therefore, we recommend trying all the supplied earbuds with your headset.

You can wear your H680 headset on your left or right ear. The headset comes ready for the right ear.

• Placing the headset on your ear: see figure 3 on page 2. Placing the headset on the left ear: see figure 4 on page 2.

Charging your headset

• See figure 5 on page 3.

Important: Your headset must be turned off when charging.

1. Plug the Motorola charger into the port on the charger case.
2. Place the headset into the charger case ensuring that the charging contacts on the headset and charging case connect.

The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset’s battery is fully charged (about 2.5 hours), the indicator light turns off.

Note: The headset is NOT functional while charging.

Storing your headset

• See figure 6 on page 3.

• The charger case provided is used to charge and store your headset.
• When not using your headset, you should place it in the charger base. Be sure to turn the headset off before placing it into the charger case.
• The charger cover can be placed on top of the charger case, or underneath it to provide support for desktop placement.

Turning the headset on and off

• See figure 7 on page 4.

• To turn your headset on, slide the Power switch on (towards Power symbol on headset). The indicator light is steadily purple for several seconds, then fl ashes blue (if paired and connected with another device) or is steadily blue (if ready to be paired).
• To turn your headset off, slide the Power switch off. The indicator light will turn off.

Pairing your headset

• Your phone’s Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phone’s user’s guide.

Note: The Bluetooth feature remains on until you turn the feature off.

• Before you can use your headset, you must pair it with your phone.
• Ensure headset is in pairing mode
  • Remove headset from charging base and power it on.
  • The indicator light fl ashes to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
  • If the headset does not enter into pairing mode, see “Troubleshooting” section.
• Set your phone to look for your headset
  • Perform a device discovery from the phone. For details about device discovery, consult your phone’s user’s guide. The phone lists Bluetooth devices it fi nds.
  • Select Motorola H680 in the list of discovered devices and confi rm by following the on-screen prompts.
  • When prompted by the phone, enter the passkey 0000 and confi rm.

Pairing is successful when the headset indicator changes from steadily lit to fl ashing blue.

Test and Use

• Your phone and headset are now paired and ready to make and receive calls. To confi rm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset.
• After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset.

Using your headset: Making & receiving calls

• Your headset supports both hands-free and headset profi les.
• Accessing call functions depend upon which profi le your phone supports. See your phone’s user’s guide for more information.
  • Note: Some features are phone/network dependent.

tones
Redial last call| Press and hold the Call button until you hear 2 ascending tones
Make a voice dial call| Tap the Call button and speak the name after the tone
Answer a second incoming call| Tap the Call button
Disable the indicator light| Turn headset off, press and hold both volume buttons AND simultaneously turn headset back on
Mute or un-mute a call| Tap both Volume buttons

Indicator lights

With charger plugged in

With no charger plugged in

Note: After 30 minutes on a call or of inactivity, the light stops fl ashing to conserve battery power, but the headset remains in standby mode.

Audio tones

Troubleshooting

• My headset will not charge
  • Make sure your headset is turned off when charging. Your headset will not charge in the charger case while powered on.
• My headset will not enter pairing mode
  • Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode.
• My phone doesn’t find my headset
  • Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices.
• My headset worked before but now it’s not working
  • Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again.
  • If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.hellomoto.com.

Frequently Asked Questions

What is the Motorola H680 Bluetooth Headset, and what does it do?

The Motorola H680 is a Bluetooth headset that allows you to wirelessly connect to your devices for hands-free communication.

How do I pair my smartphone with the Motorola H680 Bluetooth Headset?

To pair your smartphone, turn on the headset, enter pairing mode, and follow the instructions in your phone's Bluetooth settings.

What is the battery life of the Motorola H680?

The Motorola H680 offers up to 6 hours of talk time on a single charge.

Is the Motorola H680 compatible with both Android and iOS devices?

Yes, the Motorola H680 is compatible with both Android and iOS smartphones and tablets.

Does the Motorola H680 support voice commands?

Yes, it supports voice commands for hands-free operation, such as answering or rejecting calls.

Can I use the Motorola H680 with my PC or laptop?

Yes, you can use the Motorola H680 with compatible PCs and laptops that have Bluetooth capability.

How do I charge the Motorola H680 Bluetooth Headset?

You can charge the headset using the included micro USB cable, which can be connected to a USB port or wall charger.

Is the Motorola H680 waterproof or sweat-resistant?

The Motorola H680 is not waterproof or sweat-resistant, so it's important to keep it dry.

Can I connect the Motorola H680 to multiple devices simultaneously?

No, the Motorola H680 can be paired with one device at a time.

Does the Motorola H680 have noise-cancellation technology?

Yes, it features noise reduction technology for clearer calls in noisy environments.

Can I listen to music with the Motorola H680?

While it's primarily designed for calls, you can listen to music with it, although the audio quality may not be as high as dedicated headphones.

Can I use the Motorola H680 with a non-Motorola device?

Yes, the Motorola H680 is compatible with a wide range of Bluetooth-enabled devices, not limited to Motorola products.

Reference:Motorola H680 Bluetooth Headset User Manual- device.report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>