V-TAC VT-8410 Series LED Dome Light CCT Select Instruction Manual
- June 16, 2024
- V TAC
Table of Contents
- V-TAC VT-8410 Series LED Dome Light CCT Select
- Product Information
- Product Usage Instructions
- TECHNICAL DATA
- INTRODUCTION & WARRANTY
- SAFETY WARNING
- USAGE GUIDELINES/MAINTENANCE
- MOUNTING
- INSTALLATION INSTRUCTION
- DISASSEMBLY DIAGRAM
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
V-TAC VT-8410 Series LED Dome Light CCT Select
Product Information
Specifications
Model| SKU| Watts| Input Voltage| Lumen| Beam Angle| Color Temperature| IP
Rating| Dimension| Life Span| On/Off Cycle| Operation Temperature
---|---|---|---|---|---|---|---|---|---|---|---
VT-8412| 217602, 217603| Unknown| Unknown| >15,000| Unknown| CCT Select with
Built-in Switch| IP20| Unknown| 20,000 Hours| >15,000| Unknown
VT-8418| 217604, 217605| Unknown| Unknown| >15,000| Unknown| CCT Select with
Built-in Switch| IP20| Unknown| 20,000 Hours| >15,000| Unknown
VT-8424| 217606, 217607| Unknown| Unknown| >15,000| Unknown| CCT Select with
Built-in Switch| IP20| Unknown| 20,000 Hours| >15,000| Unknown
VT-8436| 217608, 217609| Unknown| Unknown| >15,000| Unknown| CCT Select with
Built-in Switch| IP20| Unknown| 20,000 Hours| >15,000| Unknown
Product Usage Instructions
Attention and Safety Precautions
- Do not look directly at the LED light beam.
- The product should only be used with the rated voltage or voltage within the provided range.
- Do not use the product with a damaged protective cover.
- Avoid using the product in unfavorable conditions such as dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes.
- In areas of strong electromagnetic interference, the product’s functioning may be disrupted.
Maintenance
- All maintenance work should be performed when the power supply is cut off and the product has cooled down.
- Clean the product only with a soft and dry cloth, avoiding the use of chemical detergents.
- Do not cover the product and ensure free air access.
- Note that the product may heat up to a higher temperature.
Mounting
- Read the manual before mounting.
- Mounting should be performed by a qualified electrician.
- Exercise caution during mounting, as the product has a protective contact/terminal.
- Failure to connect the protective lead may lead to electric shock.
- Refer to the mounting diagram for proper installation.
- Check for proper mechanical fastening and connection to electrical power before first use.
Installation Instruction
The installation diagram for the CCT Select with Built-in Switch is as
follows:
- [BG] ! . . . , , , , , , , .. . / . . . . . – . . : . . . /. , . : . . . [IT] INTRODUZIONE E GARANZIA [FR] INTRODUCTION & GARANTIE [HR] UVOD I JAMSTVO
Language Options
The product instructions are available in multiple languages, including BG,
IT, FR, and HR.
Replaceable Light Source
The product contains a replaceable LED light source. Replacement should be
done by a professional.
FAQ
-
Q: Can the product be used in wet environments?
A: No, the product has an IP20 rating and should not be used in unfavorable conditions like water or moisture. -
Q: How long is the lifespan of the product?
A: The product has a lifespan of 20,000 hours. -
Q: Can the product be cleaned with chemical detergents?
A: No, only clean the product with a soft and dry cloth, avoiding the use of chemical detergents.
TECHNICAL DATA
This product contains a light source of energy efficiency class
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
SAFETY WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor use only
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
- Method of attachment of the cable or cord such that any replacement can only be made by the manufacturer, his service agent, or a similarly qualified person.
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
ATTENTION!
Do not look directly at the LED light beam. The product can only be supplied
by rated voltage or voltage within the range provided. It’s forbidden to use
the product with a damaged protective cover. Product must not be used in
unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air
atmosphere, fumes, or chemical fumes, etc. In the area of strong
electromagnetic interference, the functioning of the product may be disrupted.
USAGE GUIDELINES/MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry clothes. Do not use chemical detergents. Do not cover the product. Ensure free air access. The product may heat up to a higher temperature.
MOUNTING
Read the manual before mounting. Mounting should be performed by a qualified electrician. Exercise caution. The product has a protective contact /terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use.
INSTALLATION INSTRUCTION
- Switch Off the Power Before Starting the Installation.
- Twist and remove the cover (Ref Image Part 2)
- When installing, it is necessary to remove the poly foam from the dome light.
- Drill a hole in the ceiling to fix the light using screws (Ref Image Part 3)
- Connect the wires (Ref Image Part 4) before fixing the light using screws on the ceiling.
- Twist and lock the cover to the light (Ref Image Part 5)
- Switch ON the power and test the light.